Additive Manufacturing Products By INVENTO

• Nut Material: Brass; Thread Type: M8 Metric Thread; Pitch: 1.25mm; Inside Diameter: 8mm
• Rod Length: 1000 mm (1 meter); Pitch - 1.25 mm; Material: SS 304 (Stainless Steel)
• Note: Threads are Metric M8, not 8mm TR8 Lead Screw. Please contact us before order for any doubt.
• Application: 3D Printer, CNC, Robotics, DIY Projects etc
• Package Include: 4 x M8 T-Nut, 4 x 1000mm M8 Threaded Rod

• Material: ABS
• The filament is for 3D printing pen or 3D Printer and used to melt plastic at a high temperature.
• Length: 30 meter; Diameter: 1.75mm
• Color: Blue ; Temperature; 240 degreeC - 260 degreeC; Heatbed Temperature: 80 degreeC (min)
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 10-50mm deviation due to manual measurement.

• Material: PLA
• The filament is for 3D printing pen or 3D Printer and used to melt plastic at a high temperature.
• Length: 30 meter; Diameter: 1.75mm
• Color: Yellow ; Temperature; 190 degreeC - 230 degreeC
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 10-50mm deviation due to manual measurement.

• Outside Diameter: 8mm; Thread Type: Square Thread (ACME Trapezoidal)
• Length: 300 mm; Pitch: 2mm
• Rod Material: Stainless Steel; Nut Material: Brass
• Qty: 1pcs 8x300mm Rod + 1pcs Brass Nut
• Application: 3D Printer, CNC, Robotics, DIY Projects etc

• Cable length: 1 meter
• 6pin XH2.54 Female to 4 Pin Dupont Female cable
• One end is 4pin DuPont connector head, another end is 6pin XH2.54 white terminal
• Suitable for NEMA 17 Motor, Ramps 1.4 & CNC Shield
• NOTE: For connection see the picture. Please check your motor and circuit connections before making a purchase. Wire colour can be different as shown in picture. Wire will be supplied as per stock availability. if you have specific colour requirement please confirm with us before placing order.

• Material: PLA
• The filament is for 3D printing pen used to melt plastic at a high temperature
• Length:10 meter; Diameter: 1.75mm
• Color: Pink; Temperature; 190 degreeC - 230 degreeC
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 1-5mm deviation due to manual measurement.

• These dampers are used for reducing stepper motor noise and vibration. Excellent anti-vibration dampers for quiet stepper motors.This item included dampers made of high quality metal and rubber, durable in use.
• Stepper motors are affected by resonance. Resonance is caused by parts vibrating in concert with each other, which can be lessened by fitting a stepper motor anti-vibration damper.
• These energy- absorbing rubber mounts with a metal mounting face.
• Suitable for CNC 3D printer stepper motor.
• Package Include 3 x Nema 17 Vibration Damper

• Model : FL003
• Shaft Diameter : 17mm (for which bearing is used)
• Size : 70x45x18mm
• Mounting Base Hole Diameter : 7mm
• Mounting Base Holes Centre Distance : 56mm

• Diameter: 1.75mm; Weight: 1kg (800 grams PLA + 200 grams Spool)
• Color: Natural Transparent Clear; Temperature; 190 degreeC - 230 degreeC
• Net Weight of Spool is 1Kg in which spool weight is 200 grams and PLA weight is 800 grams. Spool design can vary from picture as it will be supplied as per stock availability.
• Due to light and screen difference, the item's color may be slightly different from the pictures. If you have any specific requirement regarding regarding PLA or Spool then please contact us before making a purchase.

• Note: Color of Bearing may be changed from picture. If you have any specific color requirement please contact us before ordering.
• Sliding Rod Size : 8mm; Holes Dia.: 4mm; Holes Centre Distacnce: 18x24
• Bearing Size: 30 x 34 x 22mm (LxWxH)
• LM8UU Linear bearing is tightly fitted inside a 3D Printed SC8UU bearing block. Working performance and dimensions are same as of aluminium block bearing.
• Package Include: 2 x SC8UU Bearing

• Shaft Compatibility : 5mm to 8mm
• Length: 25mm; Outer Diameter: 20mm
• Material: Aluminium
• Suitable for Nema 17 Stepper Motor or for any motor/rod having 5mm diameter.
• Package Include: 8 x Flexible Coupling

• Outside Diameter: 8mm; Thread Type: Square Thread (ACME Trapezoidal)
• Length: 100 mm; Pitch: 2mm (Single Start Threads)
• Rod Material: Stainless Steel; Nut Material: Brass
• Qty: 2pcs Tr8x100mm Rod + 2pcs Brass Nut
• Application: 3D Printer, CNC, Robotics, DIY Projects etc

• The filament is for 3D printing pen or 3D Printer and used to melt plastic at a high temperature.
• Length: 5 meter; Diameter: 1.75mm
• Color: Yellow ; Temperature; 190 degreeC - 230 degreeC
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 10-50mm deviation due to manual measurement.

• Material: PLA
• The filament is for 3D printing pen or 3D Printer and used to melt plastic at a high temperature.
• Length:5 meter; Diameter: 1.75mm
• Color: Silver ; Temperature; 190 degreeC - 230 degreeC
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 10-50mm deviation due to manual measurement.

• Material: Brass
• Pitch: 2mm (Single Start Threads); Inside Diameter: 8mm; For actual dimension please see diagram in photos
• Thread Type: Trapezoidal Metric Thread; Spring loaded Anti Backlash Nut
• Application: 3D Printer, CNC, Robotics, DIY Projects etc
• Package Include: 4 x Tr8 Anti Backlash Nut

• Material: PLA
• The filament is for 3D printing pen or 3D Printer and used to melt plastic at a high temperature.
• Length:10 meter; Diameter: 1.75mm
• Color: Black ; Temperature; 190 degreeC - 230 degreeC
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 10-50mm deviation due to manual measurement.