Cutting Tools By MARS-TECH

• 1.Shoulder and Face Milling Cutters for milling machine
• 2.Hardened with 45-50 HRC for wear resistance
• 3.Comes with Hardened Torx Screw and Torx key in a plastic box
• 4.Run out is below 0.010 Micron for better machining
• 5.You can put any brand's insert of APMT1604 as its an ISO insert ,

• Runout less than 0.005 micron
• Balanced at G6.3 12000 RPM
• Packed in Plastic box
• Quality guranteed

• This model is CYL20 ER20A-100L
• Suitable spanner is ER20A and suitable collet is ER20
• Collet of this chuck has range from 1 mm to 13 mm
• Collets and spanner not include in order

• This model is BT40 45 DEGREE WITH HOLE

• 1.Shoulder and Face Milling Cutters for milling machine
• 2.Hardened with 45-50 HRC for wear resistance
• 3.Comes with Hardened Torx Screw and Torx key in a plastic box
• 4.Run out is below 0.010 Micron for better machining
• 5.You can put any brand's insert of APMT1135 as its an ISO insert

• Shoulder and Face Milling Cutters for milling machine
• Hardened with 45-50 HRC for wear resistance
• Comes with Hardened Torx Screw and Torx key in a plastic box
• Suitable to almost APMT1604 inserts in the market , 1604 ,
• Try TABIKUT Carbide Inserts for this cutter.

• This model is BT40 90 DEGREE without Hole
• Please check last image for technical data

• Round Shoulder and Face Milling Cutters for milling machine
• Shoulder and Face Milling Cutters for milling machine
• Comes with Hardened Torx Screw and Torx key in a plastic box
• Run out is below 0.010 Micron for better machining
• you can use any ISO inserts of RPMT1204 into this ,

• 1.Shoulder and Face Milling Cutters for milling machine
• 2.Hardened with 45-50 HRC for wear resistance
• 3.Comes with Hardened Torx Screw and Torx key in a plastic box
• 4.Run out is below 0.010 Micron for better machining
• 5.You can put any brand's insert of APMT1135 as its an ISO insert

• This model is CYL25 ER25UM-100L in mm

• 1. Shoulder and Face Milling Cutters for milling machine
• 2. Hardened with 45-50 HRC for wear resistance
• 3.Comes with Hardened Torx Screw and Torx key in a plastic box
• 4.Run out is below 0.010 Micron for better machining
• 5.You can put any brand's insert of APMT1604 as its an ISO insert ,

• Shoulder and Face Milling Cutters for milling machine
• Hardened with 45-50 HRC for wear resistance
• Comes with Hardened Torx Screw and Torx key in a plastic box
• Run out is below 0.010 Micron for better machining
• You can put any brand's insert of APMT1135 as its an ISO insert ,

• Reducing shank cutter for better clearance Dia 20 shank 19
• This Model is 120 mm Long , Can put any company's APMT1135 insert its an ISO insert
• Hardened with 45-50 HRC for wear resistance , Run out is below 0.010 Micron for better machining ,Comes with Hardened Torx Screw and Torx key in a plastic box
• High precision for better machining.

• Kindly check if your insert is RPMW1003 OR RPMT10T3 , this cutter only for RPMW1003Shoulder and Face Milling Cutters for milling machine
• Hardened with 45-50 HRC for wear resistance
• Comes with Hardened Torx Screw and Torx key in a plastic box
• Run out is below 0.010 Micron for better machining
• You can put any brand's insert of RPMT1003/R5 as its an ISO insert ,