Indian Construction Industry

Super Tool

Cutting Tools

Contact
For Trade
Amazon Brands
Covid-19 Essentials
Bestsellers
Home » Industrial & Scientific Store » Cutting Tools » Super Tool

Cutting Tools By Super Tool

by Super Tool
Price: Price39115 Mrp Price55879
You Save: -30%
by Super Tool
Price: Price35546 Mrp Price64629
You Save: -45%
by Super Tool
Price: Price33935 Mrp Price54734
You Save: -38%
1 5/8" Aircraft Counterbore, Carbide Tipped, (Reduced Shank Counterbore), 1/2" Shank Diameter, 3 Flutes, 3 1/16" OAL, (1.625" Diameter, 1-5/8), 52252, USA Made - Product Features
  • For counterboring and spotfacing in applications where machine requires a smaller shank
  • 1/64\" Corner Radius, Tool Diameter Tolerance: +.001\"/-0\". Shank Diameter Tolerance: +0\"/-.001\"
  • Pilot Hole Diameter:5/16, If using a pilot this is the shank diameter of the pilot you should choose
  • Minimum Cut Diameter: .343\" Because there is a pilot hole the tool will not cut below this diameter.
  • Set screw to hold a pilot or drill bit in place (if you are using a pilot or drill bit)
 
3" Diameter x 1/4" Wide x 1" Arbor Hole, Carbide Tipped Straight Tooth Side Milling Cutter - Product Features
  • 4 teeth
  • For non-ferrous
  • 0.25\" wide
  • 3\" Diameter
  • Diameter tolerance: +.0625\"/-0\", width tolerance: +.001\"/-0\", arbor hole tolerance: +.001\"/-0\"
 
1 1/4" Aircraft Counterbore, Carbide Tipped, (Reduced Shank Counterbore), 3/8" Shank Diameter, 3 Flutes, 2 3/4" OAL, (1.25" Diameter, 1-1/4), 52240, USA Made - Product Features
  • For counterboring and spotfacing in applications where machine requires a smaller shank
  • 1/64\" Corner Radius, Tool Diameter Tolerance: +.001\"/-0\". Shank Diameter Tolerance: +0\"/-.001\"
  • Pilot Hole Diameter:1/4, If using a pilot this is the shank diameter of the pilot you should choose
  • Minimum Cut Diameter: .281\" Because there is a pilot hole the tool will not cut below this diameter.
  • Set screw to hold a pilot or drill bit in place (if you are using a pilot or drill bit)
 
47/64" Stub Drill, Carbide Tipped, 118 Point, 3 1/8" Flute Length, 5" Overall Length, Super Tool, USA Made, 43647 - Product Features
  • 0.7344\" Diameter
  • 3 1/8 \" Length of Flute
  • 5\" Overall Length
  • Not recommended for Steels
 
3/4" Drill Bit, Carbide Tipped, Taper Length, 9 3/4" Overall Length, 118 Standard Point, (0.75") Super Tool, USA Made, 50248 - Product Features
  • 0.75\" Diameter
  • 5 7/8\" Length of Flute
  • 9 3/4\" Overall Length
  • Not recommended for drilling steels
 
39/64" Diameter Carbide Tipped Taper Length Twist Drill, 135 Split Point - Product Features
  • 8 3/4\" overall length
  • 4 7/8\" flute length
  • For general purpose drilling of tough and abrasive materials.
 
1 7/16" (1.4375") Diameter Carbide Tipped Chucking Reamer, Partial Flute Carbide, 55328 - Product Features
  • 8 flutes
  • 12\" overall length
  • 3 1/4\" flute length
  • For General Purpose Reaming, Cutting Diameter Tolerance: +.0003\"/-0\"
  • 1 1/4\" shank diameter
 
1 1/2" Aircraft Counterbore, Carbide Tipped, (Reduced Shank Counterbore), 3/8" Shank Diameter, 3 Flutes, 2 3/4" OAL, (1.5" Diameter, 1-1/2), 52248, USA Made - Product Features
  • For counterboring and spotfacing in applications where machine requires a smaller shank
  • 1/64\" Corner Radius, Tool Diameter Tolerance: +.001\"/-0\". Shank Diameter Tolerance: +0\"/-.001\"
  • Pilot Hole Diameter:1/4, If using a pilot this is the shank diameter of the pilot you should choose
  • Minimum Cut Diameter: .281\" Because there is a pilot hole the tool will not cut below this diameter.
  • Set screw to hold a pilot or drill bit in place (if you are using a pilot or drill bit)
 
1 7/16" Aircraft Counterbore, Carbide Tipped, (Reduced Shank Counterbore), 3/8" Shank Diameter, 3 Flutes, 2 3/4" OAL, (1.4375" Diameter, 1-7/16), 52246, USA Made - Product Features
  • For counterboring and spotfacing in applications where machine requires a smaller shank
  • 1/64\" Corner Radius, Tool Diameter Tolerance: +.001\"/-0\". Shank Diameter Tolerance: +0\"/-.001\"
  • Pilot Hole Diameter:1/4, If using a pilot this is the shank diameter of the pilot you should choose
  • Minimum Cut Diameter: .281\" Because there is a pilot hole the tool will not cut below this diameter.
  • Set screw to hold a pilot or drill bit in place (if you are using a pilot or drill bit)
 
35mm (1.378") Diameter Carbide Tipped Chucking Reamer, USA Made, 5655350 - Product Features
  • Tool Diameter Tolerance: +.0003\"/-0\"
  • 12\" Overall Length
  • 1\" Shank Diameter
  • 8 Flutes
  • 3.25\" Length of Flute, 7/8\" Carbide Length
 
39/64" Drill Bit, Carbide Tipped, Taper Length, 8 3/4" Overall Length, 118 Standard Point, (0.6094") Super Tool, USA Made, 50239 - Product Features
  • Not recommended for drilling steels
 
37/64" Diameter Carbide Tipped Taper Length Twist Drill, 135 Split Point - Product Features
  • 8 3/4\" overall length
  • 4 7/8\" flute length
  • For general purpose drilling of tough and abrasive materials.
 
17mm Carbide Tipped Stub Drill, 118 Point, 73mm Flute Length, 117mm Overall Length, Super Tool, USA Made, 303170 - Product Features
  • 17mm Diameter (0.6693\")
  • 73mm Length of Flute
  • 117mm Overall Length
  • Not recommended for Steels
 
16mm Carbide Tipped Stub Drill, 118 Point, 73mm Flute Length, 114mm Overall Length, Super Tool, USA Made, 303160 - Product Features
  • 16mm Diameter (0.6299\")
  • 73mm Length of Flute
  • 114mm Overall Length
  • Not recommended for Steels
 
1 1/8" Aircraft Counterbore, Carbide Tipped, (Reduced Shank Counterbore), 3/8" Shank Diameter, 3 Flutes, 2 3/4" OAL, (1.125" Diameter, 1-1/8), 52236, USA Made - Product Features
  • For counterboring and spotfacing in applications where machine requires a smaller shank
  • 1/64\" Corner Radius, Tool Diameter Tolerance: +.001\"/-0\". Shank Diameter Tolerance: +0\"/-.001\"
  • Pilot Hole Diameter:3/16, If using a pilot this is the shank diameter of the pilot you should choose
  • Minimum Cut Diameter: .219\" Because there is a pilot hole the tool will not cut below this diameter.
  • Set screw to hold a pilot or drill bit in place (if you are using a pilot or drill bit)
 
3/4" Stub Drill, Carbide Tipped, 118 Point, 3 1/8" Flute Length, 5" Overall Length, Super Tool, USA Made, 43648 - Product Features
  • 0.75\" Diameter
  • 3 1/8 \" Length of Flute
  • 5\" Overall Length
  • Not recommended for Steels
 
 
If you have a business establishment in india,

Contact us

 to list your business related to any construction categories.
 
Browse by Topic
Cement
Cement Concrete
Glass
Inside Outside
Paints, Varnishes And Distermpers
Steel
Construction Events
To Know more about the events about Air Conditioners, Basements, Bathrooms, Bedrooms, Cabinets, Decorating, Design Plans, Doors, Electrical Lightings, Flooring, Home Security, Kitchen, Landscape, Painting, Plumbing, Fixtures and many more..
Read More..
 
 
Facebook Twitter Instagram LinkedIn
© 2007 - IndianConstructionIndustry.com. All Rights Reserved
Home  |  Overview  |  Advertise  |  Link to us  |  About us  |  Contact us  |  Sitemap  |  Privacy Statement