Cutting Tools By Bosch

• MOBILE DUST EXTRACTOR DESIGN: Built to deliver maximum mobility used with the Bosch cordless GBH18V-28DC Bulldog
• HEPA FILTER: Allows users to move toward OSHA silica dust regulation compliance
• TOOL BATTERY COMPATIBLE: Mounts to the tool, allowing the use of the hammer's fan when in use, so no additional battery required
• TWO DUST-EYES AND 4 IN. EXTENSION: Available in 5/8 In. and 1-1/8 In. sizes for use with bits 5/32 In. to 1-1/8 In. in diameter and up to 10 In. in length
• ALUMINUM GUIDE RAIL: Provides smooth retraction of the Dust Eye during the drilling application
• REMOVABLE DUST CONTAINER: Provides capacity for up to 20 holes using a 1/2 In. diameter bit drilling 1-1/2 In. deep into concrete
• DUST BOX EMPTY FLAP: Simply open the flap on the back of the dust extraction unit to easily remove dust
• AUTO-POWER ON: Delivers power to the attachment when the user pulls the hammer trigger
• TRANSPARENT DUST CONTAINER: Permits monitoring of actual dust level
• FILTER CLEANING MECHANISM: Turning the nob helps remove excess dust and debris from the HEPA filter

• MOBILE DUST EXTRACTOR DESIGN: Built to deliver maximum mobility used with the Bosch cordless GBH18V-28DC Bulldog
• HEPA FILTER: Allows users to move toward OSHA silica dust regulation compliance
• TOOL BATTERY COMPATIBLE: Mounts to the tool, allowing the use of the hammer's fan when in use, so no additional battery required
• TWO DUST-EYES AND 4 IN. EXTENSION: Available in 5/8 In. and 1-1/8 In. sizes for use with bits 5/32 In. to 1-1/8 In. in diameter and up to 10 In. in length
• ALUMINUM GUIDE RAIL: Provides smooth retraction of the Dust Eye during the drilling application
• REMOVABLE DUST CONTAINER: Provides capacity for up to 20 holes using a 1/2 In. diameter bit drilling 1-1/2 In. deep into concrete
• DUST BOX EMPTY FLAP: Simply open the flap on the back of the dust extraction unit to easily remove dust
• AUTO-POWER ON: Delivers power to the attachment when the user pulls the hammer trigger
• TRANSPARENT DUST CONTAINER: Permits monitoring of actual dust level
• FILTER CLEANING MECHANISM: Turning the nob helps remove excess dust and debris from the HEPA filter

• L-boxx system: l-boxx-2 layout - created to store many bosch 18 v cordless drills, drivers, tools and accessories: jig saws, routers, grinders and drills
• Effortless locking clips - simple lock and unlock for fast access to tools: theft security - lockable cases with optional padlock; built-in versatility - designed for compatibility with other cases
• Color: green; l-boxx stackable tool-storage system - features cases that interlock quickly, protect tools securely and handle easily, yet are accessible even when stacked
• Package contents: tool storage case; optimized accessibility - engineered stack elements ensure easy access even when the boxes are stacked
• Top, front and side handles - three carrying options for comfort in all situations, with larger front handle; durable - shock proof (fully crash tested) and water resistant material

• The Router Bit Set offers fine cuts for a variety of applications, making it the perfect choice for woodworkers such as joiners, carpenters, interior installers and construction workers.
• The carbide cutting edges of the bits ensure a long lifetime, while routing a variety of profiles in many different materials is possible thanks to the various cutting geometries. Furthermore, they are manufactured according to the safety standards of DIN EN-847. The router bits are intended for use in soft wood, hard wood and wood composites.
• The Mixed Router Bit Set, 30-Pieces is a complete collection of router bits for most common routing applications and also comes with additional spare parts such as a hex key and three ball bearings. The Router Bit Set features a special Easy-Pick design of the inlay, allowing the bits to be taken out quickly and safely by the shank.
• It comes in an exclusive and highly robust case that firmly and securely holds bits, offering perfect protection for its contents for safe storage and transport. It features a transparent cover for visibility of the content.
• The set is available in three versions, either in 6 mm, 8 mm, or 1/4-inch shank diameter, to cover compatibility with all common handheld routers.

• The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer.
• This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring without wandering are achieved by the pointed split-point tip.
• This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers.
• Diameter (D) mm: 12,00 Working length (L1) mm: 101 Total length (L2) mm: 151 Packaging Content-5

• Spindle collar diameter of 43 mm- Can be used in drill stands
• Rotatable brush plate for same power in forward and reverse direction; Ergonomic switch with electronic speed control
• Material: Steel, Color: Blue
• Item Dimensions: 11 cm x 4.8 cm x 2.4 cm
• Package Contains: 1-Piece Metal Drill Bit
• 6 months warranty on product

• Power and durability within reach for screw driving and drilling. Forward / reverse rotation for screws. Led Light for illumination.
• 2-speed gearbox enables high productivity and excellent torque, Torque (soft/hard/max.) - 4/30/- Nm, Torque settings : 20+1, No-load speed (1st/2nd gear)
• 0-400 / 0-1500 rpm
• Max. Drilling diameter in wood/steel - 20 mm / 10mm; Max. screw diameter - 7mm. Chuck capacity, min/max. - 1.5/10 mm, Tool holder - Three-jaw chuck
• Standard for universal screwdriver bits
• Size 45 mm
• PH2/PH2

• Spindle collar diameter of 43 mm- Can be used in drill stands
• Rotatable brush plate for same power in forward and reverse direction; Ergonomic switch with electronic speed control
• Weight: 230 g;Plastic case with window

• SDS Max-2 bits come with SDS Max shanks and are compatible with Bosch SDS Max Rotary Hammers. Its standard design with durable carbide tip gives best performance
• Its centring tip for a deep and stable drill in at beginning of the work
• Standard 2-cutter design, durable carbide for longer lifetime, best performance in its class
• 2-flute design ensures smooth dust removal for higher drilling speed
• Range is from 12mm Dia - 40mm Dia

• The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm.
• This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges.
• This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics.
• The HSS Twist Drill Bit Ground is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers.

• Range is from 12mm Dia - 40mm Dia

• Secure Drill Bit Clamping for Any Job
• Keyed Drill Chuck is a simple and reliable solution for fixing drill bits for any type of job
• Consistently strong clamping force that securely fastens cylindrical or hex shank drill bits
• Easy handling: jaws are conveniently tightened and loosened with a key
• Different mounts: 1/2\" - 20, 3/8\"- 24, 5/8\" - 16, B16, and SDS plus; compatible with most common drills