Cutting Tools By MaxTool

• Dia=0.375\"; Thickness=0.125\"
• Average partical size 25 um
• Suit for interrupted and roughting cuts >14% Si Al Alloys, Metal matrix composites, Bi-Metals, Sintered Ceramics, Carbides, and other highly abrasive materials
• Excellent high abrasion resistance and high impact strength
• Exceptional long tool life and fair good surface finish

• I.C.=0.5; Thickness=0.188; R=0.0157; Hole Dia=0.203; COD=0.083; Width=0.1614 Custom-Profiled
• Bimodal grain structure, particle size 25/4 um
• Ideal for >14% Si/Al Alloys, Fiberglass, Fiberbond, and Wood Laminates
• Exceptionally high abrasion resistance, good surface finish, outstanding impact strength and good tool life
• Custom-Profiled Tips for grooving and chamfer in one pass

• I.C. 0.500, Thickness: 0.188, Corner Radius 0.047
• Tailor made for hard finishing machining of hardened steels (HRC>45)
• Excellent abrasion resistance and tight part dimensional control
• Superior impact roughness and Chemical Stability
• Consistent surface finish in continuous and interrupted Cuts

• I.C.=0.5; Thickness=0.188; R=0.031; Hole Dia=0.203
• Suit for continuous to highly interrupted cuts
• Ideally for machining cast iron and powder metal alloys, also for milling tool steels and hard steel
• Superior impact resistance and Chemical Stability
• Excellent cutting edge quality and retention

• Corner Radius 0.031\", Tip Length 0.25\", Wiper 0.06\", Overall Length 0.875\"
• Average particle size < 1 um Titanium Alloy
• Hardness 2600 - 2800
• Suit for heavy intrruped machining of Hardened Steel
• High toughness and impact trength

• Quality HSS M2 and premium treatment HRC63-66 guarantee to resist abrasion and long tool life
• Fully ground threads and flutes make taps sharp, fast tapping and have outstanding center accuracy
• The good surface Treatment and four flutes design ensure smooth and easy chip ejection
• Ideal for cutting internal threads in pipe fittings and whenever an extremely tight fit is required
• Nominal size is that of the pipe fitting being tapped; Available in National Pipe Taper (NPT)

• Quality HSS M2 ensures sharp and fast execution in any material for clean results
• Premium Heat treated black oxide is durable and withstand heavy duty operation for a long tool life
• Black Oxide Surface Treatment holds up lubricant better for smoother drilling
• 6\" OAL & 1/2\" Str. shank fits 1/2\" drill chuck; Milled & polished flutes ensure chips move smoothly
• Precision ground with geometry of 118 degree chisel for quick penetration and an accurate start

• 25pcs jobber length drill bits includes metric sizes 1 mm to 13 mm in 0.5 mm increments
• Quality High Speed Steel M2 provides all drills long tool life
• Precision fully ground ensures chips moving smoothly, ultimate accuracy and performace
• Black and golden surface finish resists corrosion and increases the hardness of the drill bits
• 135-degree split point prevents \"Walking\", reduce logging, and penetrates hard material without a pilot hole

• 26pcs jobber length drill bits includes letter sizes A to Z
• Quality High Speed Steel M2 provides all drills long tool life
• Precision fully ground ensures chips moving smoothly, ultimate accuracy and performace
• Black and golden surface finish resists corrosion and increases the hardness of the drill bits
• 135-degree split point prevents \"Walking\", reduce logging, and penetrates hard material without a pilot hole

• I.C.=0.375; Thickness=0.156; R=0.031; Hole Dia=0.173; COD=0.110
• Average partical size 25um
• Suit for interrupted and roughting cuts Aluminum Alloys, Metal matrix composites, Bi-Metals, Sintered Ceramics, Carbides, and other highly abrasive materials
• Excellent high abrasion resistance and high impact strength
• Exceptional long tool life and fair good surface finish

• Drill bits include: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 23/64, 3/8, 25/64, 13/32, 27/64, 7/16, 29/64, 15/32, 31/64, 1/2 inch, 1/16 (0.0625) to 1/2\" (0.5) in 1/64\" increments
• Quality High Speed Steel M2 provides all drills power cutting, impressive performace and long tool life
• Precision fully ground edges and flutes ensure fast drilling, excellent chips moving smoothly and ultimate accuracy
• Black and golden surface finish resists corrosion and lubricates the drill bits better for cutting metal, wood, and plastic
• 135-degree split point prevents \"Walking\", reduce logging, and penetrates hard material without a pilot hole

• The premium high speed steel M2 material provides long tool life
• Normal Diameter: No.10; Pitch: 24 TPI
• Suit for threading through holes in all kinds of materials
• The round shank with square driver makes the taps suitable for hand or power-driven applications
• The uncoated surface finish can be used on a broad range of materials

• Premium High Speed Steel M2
• Spiral Flutes for removing chip easily from holes
• Suit for threading blind holes in steel and Non-Ferrous material; not suit for cast iron
• Round Shank With Square Driver for General Application
• Bright Surface Finish

• Premium High Speed Steel M2
• Normal Diameter: 3/8\"
• Pitch: 24 TPI
• Round Shank With Square Driver for General Application
• Surface Finish: Bright

• Premium Solid Carbide
• 3/8\" I.C. 6 TPI
• TIALN-Coated is better for machining steel, cast iron and stainless steel
• It is suitable for machining large parts at higher speed
• Excellent Anti-Built-Up and Chipping resistance

• Drills conform to ASME/ANSI B94.11M standards or USCTI - United States Cutting Tool Institute (formerly MCTI)
• Drills are fully ground, 135 Degree Chisel point with split point
• 6 inch overall length
• Black oxide surface finish
• High Speed Steel M2 Aircraft Extension Drill Bits with straight shank