Industrial & Scientific Store - Fasteners

• Steel is often used in applications where strength is the primary consideration
• Zinc plating resists corrosion and has a reflective appearance
• Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface
• Square drive resists slippage better than a Phillips or slotted drive

• Steel is often used in applications where strength is the primary consideration
• Zinc plating resists corrosion and has a reflective appearance
• Hex washer head has a flange for additional grip with the mating surface
• Hex drive tightens from the side with a wrench, enabling use when there is no space above for a driver

• Fits: All late model Honda, Yamaha, Kawasaki and Suzuki sport bikes
• Designed by reviewing the needs of mechanics and riders at the dealership and at the racetrack, this kit has over 270 pieces of premium factory style metric hardware
• This kit features socket head bolts, button head bolts, flange bolts, nylon removable rivets, Fuji-lock nuts, fairing bolts with nylon washers, windscreen fasteners and more
• This kit has been designed as a universal kit, it will replace many of the fasteners on many models, but may not contain all the fasteners on your model
• The hardware is the same size, style and finish you find on most Japanese sport bikes, meeting or exceeding OEM specifications

• Head Height 0.199\"
• Recommended Hex Socket Allen Key Wrench: 7/32
• Black Oxide is not a protective finish and will rust if exposed to moisture. Stainless Steel material is recommended for environments with moisture
• Thread Diameter 0.375\"
• Head Diameter 0.656\"

• Diameter: 1/2 inch
• Length: 2 inches
• Material: Steel
• Finish: Yellow Zinc
• Head Style: Hex (3/4 wrench)
• Diameter: 1/2\"

• Carriage bolts have a domed head that is not designed to be driven
• The flat-styled head allows for a smooth exterior finish
• Zinc Plated

• 30 Piece Pack
• Corrosion Resistant Zinc Yellow Finish
• Diameter/Pitch: 1/2-13\" | Length Under Head: 1-1/4\"
• Wrench Size: 3/4\"
• Coarse Full Threads

• One piece wrap around clip
• Threaded end is chamfered for ease of starting nut
• Length identification head marks

• Diameter/Pitch: 3/4-10\" Length: 3\"
• Threads: Coarse, Partial Thread
• Width Across Flats (Square Size Max): 0.581\"
• Material: Grade 8
• Finish: Plain & Oil

• DIN 961
• Fine Thread
• Fully Threaded
• Tensile Strength: 800 N/mm2 (thru 16 mm diam.) 800 N/mm2 (over 16 mm diam.)
• Class 8.8 Steel, Quenched and Tempered

• Stainless Steel 316 Marine Grade
• Smooth polished finish
• Corrosion and rust resistant- for long service life

• Use 5/16 Inch Hex Driver for #12 Screws
• Tensile - 180,000 psi, Hardness - 40 Rockwell C
• Type BSD is a tapping screw with spaced threads and a drill point which drills its own hole
• #3 Drill Point; Appropriate for material thicknesses up to 0.21\"

• Hot Dipped Galvonized
• 1/2\" Diameter
• Threaded End
• Comes With Nut and Round Washer