Industrial & Scientific Store - Fasteners

• Boston Whaler Exterior Bow Eye, Interior Bow Eye and Thread Stud 3.75\"

• Strong and Sturdy -- Cut from thick top-notch metal. Black powder paint for rust-resistant to go through the entire summer of heat and rain. Sturdy enough to support the bottom of your post
• Screws and Anchors Supplied -- Come with 8pcs expansion anchors for concrete floor, 8pcs external hex wood screws for wood floor, 16pcs Phillips bugle head self-tapping screws for 4x4 post securing. Fixed on a wooden floor or concrete floor, you have your choice
• Use with 4x 4 Post -- Fits a nominal standard 4x4 post (actual 3.6\"x 3.6\" dry post on market). High up to 5-1/2?, firmly anchored to your concrete slab without problem. Come with 5/8\" expansion bolts; suggest using #51 drill bit
• Universal Design -- Perfect for deck supports, porch railing, handrails and post holders. Also, can be used as table leg/mailbox post support brackets
• Satisfaction Guarantee -- If there are any concerns, please contact us without hesitating

• SHALLOW EMBEDMENT OPPORTUITIES-Less time required to drill hole
• NATIONAL COARSE THREADS-Bolts and threaded rod is most common type available
• INTERNAL THREADS Easy-removabilityWORKS IN MOST MASONRY MATERIAL-Consistent holding values in wide variety of base materials
• REQUIRES THE USE OF A SETTING TOOL-Setting tool allows for proper positive expansion of the anchor

• Max Side Length: 9-5/8\"/245mm
• Length On Both Sides: 7\"/175mm, Height: 1-1/2\"/40mm
• Thickness: 2.7mm/12 Gauge
• Slots Size: 2-3/16\" x 3/8\"/55 x 10mm. Accept 3/8\" bolt
• Each Corner Brace Max Load Capacity: 264lbs/120kg

• Coarse Thread
• Recommended Hex Socket Allen Key Wrench: 5/32 Inch

• Material type: Black-Oxide Steel
• Thread Fit: Class 2A
• Made in: United State

• Industrial Grade Lifting Eyebolt M24

• Screw Dimensions - ~5/16\" Thread Diameter - 11/16\" Head Diameter - Length 10\"
• Manufactured from High Quality Heat Treated Steel, Triple Coated, ACQ Treated Lumber Compatible

• U bolt open width: 2\" (50.8mm),adjustable length: 2-1/2\"- 4\"(64mm-100mm)
• Frame plate thick: 7/64\"(2.8mm), Thread size: M10, Thread Length: 2\"
• Carbon steel Q235B, electrogalvanized
• Suitable for boats trailer, plumbing, roof basket and RV bumper
• Package list: 10pcs 2\" square u bolt

• Connects a 2X member (typically a beam) to the side of the post
• Suitable for 2x4 minimum cross member and 4x4 minimum post
• Stronger than nails or screws, easier than through-bolting
• Made from 14 gauge steel
• Zmax galvanization offers extra corrosion resistance for exterior and treated-wood applications

• Package Contains: Set 8 Hex T-Handles 9\" Length 2-10mm with Stand
• Durable Handles: The handles are strong and comfortable
• Made of chrome-vanadium steel for rugged strength, oxide finish for protection against corrosion, sand blasted for a smooth surface
• Optimum Strength: These tools are made with steel that is heat treated, quenched and tempered for optimum strength, torque and ductility for safety and coated with a rust resistant finish
• Applications: It covers all socket screws and contain both inch and metric measurement, It is perfect for installing tightening door handles, repairing bicycle and assembling furnIture

• Summit 1-1/4 Wet-Line / Wing Nut Couplers are designed for industrial applications that require couplings to be connected and disconnected under pressure with little to no fluid loss
• Wet-line couplers are commonly used on live bed / dump trailer wet-line hydraulic systems and other heavy duty applications
• Nitrile seal with Teflon backup
• 3000 PSI working pressure rating, Nominal Flow Rate: 80 GPM
• 1-1/4 NPT Female Pipe Thread

• The material of the product is stainless steel 304 (18-8), which is resistant to corrosion, so there is no need to worry about the product corroding due to humid air.
• Stainless steel screws, with their corrosion resistance, are commonly used fasteners in households, suitable for various household applications, especially where rust resistance, aesthetics, and durability are essential. Such as Furniture Assembly,Decorative Hangings,Household Maintenance,Outdoor Gardening,Kitchen and Bathroom Installations
• Because the hardness of stainless steel screws is not as high as carbon steel, if the material is hard or thick, pre-drilling might be recommended to facilitate screw insertion and reduce the risk of damage, especially in hardwoods or metals.
• The entirety of the products within the set is available in our store. Should you only require a specific specification, you can directly visit our store to find it.
• Our products meet the standards of the asme/ansi.We test our products rigorously to ensure they meet the highest standards.

• Package Includes: this package contains 20 pcs steel brace bands; The adequacy of these fence hardware brackets means you have enough parts for a quick fix or to complete a larger project
• Right Size: this galvanized steel brace bands size with bolts and nuts is only suitable for 2-3/8 inch fence posts, please measure before buying
• Easy to Install: everyone values ease of installation, and our fence hardware brackets are no exception; Only attach the end of the chain link fence rail (not included) to the metal fence post using the included bolts and nuts
• Long Lasting: made from steel, these brace bands are rust resistant and corrosion resistant; Their longevity is assured thanks to their stalwart build, making them a reliable choice for metal fence post brackets
• Versatile: these galvanized steel brace bands are adaptable and designed to connect most gateposts, corner posts and end posts in chain link fences; These are more than just fence post brackets, they add sturdiness to your structure

• Application: Designed for optimum performance in both cracked and uncracked concrete
• Unit of Measurement: SAE
• Number in Package: 2
• Driver Bit Included
• Indoor and Outdoor

• Tailored specifically for metal-to-metal applications
• Forged from heat-treated steel and case-hardened, these self-piercing tapping screws offer unparalleled durability for all your metalwork needs.
• Featuring a hex washer head with an assembled EPDM washer, ensuring effortless driving while adapting seamlessly to the metal surface, creating a secure and long-lasting seal
• Works great for roofing, HVAC, steel stud framing, gutters and register vent projects.
• All screws are 1000 hour salt spray test dacro-coated, providing an added layer of protection against corrosion.