Industrial & Scientific Store - Fasteners

• PERFECT for installations where additional support is needed on a L-shaped counter
• Short down-flanges fasten to interior of cabinets, remaining out of the way of drawers and hardware
• Painted a Gloss Black to be sleek and HIDDEN under countertops
• Carry Capacity of 375 lbs. each keeps your countertop overhangs safe and secure
• MADE IN AMERICA to ISO certifications with high-quality materials and craftsmanship

• Tent Stakes Superior Stability: Our High-Quality Tent Stakes Heavy Duty Provides Unparalleled Stability for Your Trampoline, Tent, Swing, Basketball Hoop, Camper, Slide, Dog House, and Other Outdoor Equipment. Our Tent Stakes It Easy to Install In a Firm Place, While the Ground Anchor Adapters Allow for Easy Repositioning and Removal
• Screw In Stakes Value Set: Our Ground Screw is the Perfect Gift for Families Who Love to Embrace Nature. with 16\" 6PCS/12PCS Screw Ground Anchors and 1 PCS Ground Anchor Adapter, You Get a Great Value Set That Will Keep Your Outdoor Equipment Safe and Secure
• Quickly Set Up Your Safe Zone: Our Tent Stakes Heavy Duty Are Designed with Their Own Ground Anchor Adapter, Which Allows You to Drive the Ground Anchor Directly Into the Ground. This Makes it Quick and Easy to Secure Your Outdoor Equipment, No Matter What Terrain or Weather Conditions You're Facing
• Suitable for All Terrains and Weather: Our Spiral Tent Stakes Heavy Duty and Ground Anchor Adapter Are Made From Solid Steel and Are Among the Best in the Industry for Durability and Load-Carrying Capacity. They Can Withstand Harsh Weather Conditions, So You Don't Have to Worry About Breaking Tent Stakes Heavy Duty
• Satisfactory Service: We Will Check the Ground Anchors Screw in for Yard for You Before Leaving the Factory, You Don't Need to Take Any Risks. Overall, Our Terms of Service Are Designed to Ensure Customers That You Enjoy the Shopping Experience in a Positive and Are Satisfied With This Purchase, Immediately Add Purchase

• #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25
• Self-tapping, countersinking head; W-Cut thread design
• One pail contains 480 screws
• Climatek coated for all weather corrosion protection conforms with ICC#2442
• For use in wood, particle-board, cement fiberboard, plastic, and sheet metal

• High Performance Exterior Coated Star/Torx Drive Wood Lag Screws (100 LAG SCREW COUNT)
• Modified Truss (Washer) Head Provides High Compression Forces & Neat and Finished Appearance.
• Type 17 Notched Extra Sharp Wood Screw Point Reduces the Need for Pre-Drilling in Even Hard Woods
• Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power
• Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads

• The heavy duty hose 100ft is perfect hose extension, it's durable and able to support quite high working pressure. Inner tube is reinforced with synthetic rubber. Reasonable selection of 1/4\" inner diameter greatly reduces the weight and volume of the hose body, making it more convenient to use and storage. Its innovative high-tech materials and processes can extend the service life and are safe to use, suitable for household cleaning & commercial use.
• MAX working pressure of this high pressure washer hose can reach 4200 PSI with 1/4\" inner diameter. The burst pressure is up to 16000 PSI. Max working temperature is 140 / 60 degree C. Flow rate is 2.5 GPM to 5 GPM. It's designed to be compatible with most brands of gas or electric pressure washers, and garden hose reel or hose holder.
• / The 1/4\" inner diameter pressure washer hose is equipped with 3/8\" quick connector which is not only easy to connect & disconnect, but also helps connect firmly to the pressure washer without being easily shaken, damaged, rusted or leaked. 2 pcs pressure washer adapter, m22 14 mm to 3/8 hose quick connect what you want.
• The combination of high-quality materials and high-tech craftsmanship brings excellent kink resistance. It's easy to carry, drag and roll up. Warm Tips: For ease of movement and storage, please lay the hose flat to its full length when using it for the first time.
• PACKAGE INCLUDE 1 * steel wire braided 100 feet pressure washer hose, 1 * M22 14mm female & 3/8 inch male plug , 1* M22 14mm female & 3/8 inch female coupler.
• GREAT SERVICE If you have any issues, please feel free to message POHIR at any time, we're online 7x24 ready for warranty & support.

• [COATED SCREWS] 2.5 mil of computer controlled powder coating apllied over zinc plating and chromate sealer. Resists harmful UV rays and chemical breakdown. Completely free of volatile organic compounds (VOC), and is entirely recyclable
• [TYPE A FASTENER] Designed for use in wood framed buildings
• [RESCUE SCREW] Used in retrofit applications in which existing screws have stripped/backed out & need to be replaced with a larger diameter
• [EPDM RUBBER WASHER] Head and washer face captures the washer even when drive at an angle & are designed to maximize Pull over strength

• Allows easy repair of rotted or damaged 4x4 wood posts installed in concrete or dirt
• Reinforces weakened wood posts without having to replace the post or the concrete
• Sold individually; use in pairs
• Approved for installation with the Strong-Drive SD Connector screw
• Made from 12-gauge steel

• HIGH QUALITY TO BE TRUSTWORTHY: 304 stainless steel material, not rust, anti-moisture, anti - oxidation, corrosion resistant, acid/alkali resistance, high hardness. No pollution, Health lead-free environmental protection non-toxic.
• STANDARD SIZE: Uniform force, located in the center of the head with no offset, not easy to slip; Uniform pitch, obvious screw thread, no residual burrs, the set screw threads will be able to get a good grip.
• MANY SPECIFICATION TO BE CHOSEN: 1/4-20 x 1/2 ?1/4-20 x 3/4 ?1/4-20 x 1 1/4-20 x 1-1/4 ?1/4-20 x1-1/2 ?5/16-18 x 3/4 ?5/16-18 x 1 ?5/16-18 x 1-1/4 ?5/16-18 x 1-1/2 ?5/16-18 x 2 ?3/8-16 x 3/4 ?3/8-16 x 1 ?3/8-16 x 1-1/4 ?3/8-16 x 1-1/2 ?3/8-16 x 2 , total 579 pcs, Includes 15 Most Common Sizes.
• PLASTIC HEAT SEAL PACKAGING: Practical and convenient of packing box, All of screws and nuts are packed in a durable and sturdy box, this box can be use for a storage box.
• THE WIDE APPLICATIONS: Door handle, faucet, light fixture, knobs, locks and toys, , plumber and other small repairs around the shop, garage or home; and all kinds of precision machinery, classified instruments, electronic products, household appliances, communication products.

• Working Load Limit: 15,200 lbs. | Made for in-line or straight pull applications only
• Hot dip galvanized for durability and weather resistance | Designed to ASTM F1145 specifications
• Features a jaw on each end which is fitted with a nut and bolt or a pin & cotter pin assembly
• M= 44.04 | N= 29.54 | BB= 12 | A= 1.25 (All Measurements in Inches)
• Quantity: 1 Turnbuckle

• Sturdy Construction: Made from forged steel, the eyebolt is sturdy and durable.
• Shaft Diameter: 3/4\", Bore: 1.5\", Shaft Length: 10\".
• Working Load Limit: 7,200 lbs. Break Strength: 36,000 lbs.
• Design: Designed for straight line pulls only. For angled pulls, choose shoulder eyebolts.
• Application: Suiatble for fastening of fences, canopies, and air conditioners on concrete, brick, etc.

• Wedge anchor diameter: 1/2\" | Length: 5-1/2\" | Qty: 40 pieces. Our wedge anchor is made from high quality carbon steel, and is zinc plated to prevent rust
• Drill bit diameter/Hole diameter is the same as anchor diameter. Use a 1/2\" drill bit to drill a hole in the base material (Concrete only)
• The wedge anchor is a torque-controlled, wedge expansion anchor. The required installation torque of the anchor is 40 ft/lbs.
• The concrete anchor is for heavy duty fastening applications where high pull out values in concrete are needed. It is for concrete only, not for block or brick base material
• The wedge anchor is used in fastening sheet metal, steel and aluminum angles, or wood to concrete. The wedge anchor is ideal for structural anchorage, storage racking anchorage, machinery and hand rails installation

• Pancake head, type-17 point
• #2 square drive (driver bit in each box; replacement bit model BIT2SU)
• Straight collation

• The product is 25LB 10x3Tan Deck Screw
• Easy and simple use kit
• The product is manufactured in China

• Anti-Corrosion Coating : Hex head and washer of metal roofing screws coated with weather resistant layer, which effectively against rust on the exposed roof.
• Aggressive High-Low Threads : Roofing screws have alternating high and low threads to minimize cracking and splitting while driving, grip tightly in sheet metal and wood siding.
• EPDM Washer : Sheet metal screws with EPDM washer has well performance in sealing, tighten well in the corrugated roofing, without leakage under storm.
• Package : #14 x 1 Inch white metal roofing screws 500PCS, 2PCS 10mm hex sockets included. LIONMAX Metal Roof Screws are arranged in a nice container for convenient storage with clear lable for easy recognition.

• Cleaning Performance: The high pressure of water makes it amazingly easy to remove any kind of tough substance such as oil stains, grease and general dirt from any surface
• Cost Effective: Buying this TOUGH MASTER pressure washer is a one time investment and you get the benefit of using it for a long period of time
• Convenient And Mobile: This pressure washer is lightweight and easily transported in any vehicle, so no matter the task at hand, you are prepared
• Compact: All components are easily stored on the machine, without compromising its compact build
• Auto Stop System: Pressure into the pump reduces when the trigger gun is released to save energy and prolong pump life. The pressure washer also comes with a Child Safety Lock