Industrial & Scientific Store - Robotics

• Operating voltage: Dc3-5v
• Operating current: Less than 20ma
• Sensor type: Analog
• Detection area: 40mmx16mm
• Operating temperature: 10-30??

• Capacitor Value: 68uF
• Voltage Rating: 400V
• Lead Spacing pitch: 6.5mm
• capacitor diameter: 18mm,capacitor Height: 21mm
• Mounting Type: Through-hole

• Shell material: ABS; The contact piece Material: Phosphor Bronze
• Rated voltage: 220v-250v; Rated current: 10A
• Power frequency: 50 (HZ); Color: White
• Applications Include:- Security,; Monitor; LED lamp; Converter and so on
• Packaged by:- Sharvi Technologies (OPC) Pvt. Ltd.; Address:- #09, CK Nagar, AECS layout, Hosa Road, Bangalore-560100

• Complete Assembled & Tested Kit with 100% Output Guarantee
• Includes Project Circuit, Abstract & Explanation
• Includes AC Supply Input & AC Chord
• No Logo/Trademark on the PCB
• Used for Educational Purposes

• Drain-Source Voltage: -40V; Gate-Source Voltage: ? 20V
• Pulsed Drain Current: 12A; Power Dissipation: 0.75W; Typical Fall Time 25 ns
• Typical Rise Time: 15ns; Voltage: 600V
• Typical Turn-Off Delay Time: 25ns; Package: SOT-23
• Typical Turn-On Delay Time: 7ns

• 104 % SATISFACTION GUARANTED Consistent hole alignment; Easy Pin Insertion; Refund if you are not happy without any reason
• NO WORRIES ABOUT CIRCUIT FAILIER Spend the better part of your time on Creativity and fun DIY rather than debugging the unknown frailer of the poor breadboards
• PIN HOLES ARE EXQUISITELY LINING UP Without any intermittent connections; Holes are properly cut out
• PERFECT SET FOR YOUR EXPERT PROTOTYPING A great combination for your needs; Snap together easily in groups; Excellent for Arduino Proto Shield
• PACKAGE COMPONENT 6 X 400 tie-points

• Operating speed: 0.12second/ 60degree ( 4.8V no load)
• Stall Torque (4.8V): 17.5oz /in (1kg/cm)
• Operating voltage: 3.0V~7.2V
• Weight: 9g
• Dead band width: 7usec

• Suitable for DIY and maintenance of all kinds of dc equipment, with screw hole at the bottom and wire preinstalled, it is easy to use.
• Tough material: using tough material, high strength, good toughness, not easy to crack.
• Package includes - 2pcs battery holder
• widely used in toys, electronic DIY, breadboard power supply, LED lighting power supply, low voltage electrical equipment, remote control, radio
• Battery Holder Type: cr2032 battery holder with on off switch

• Differential input voltage: ?40mV
• Data accuracy: 24 bit
• Refresh frequency: 10/80 Hz
• Operating Voltage: 2.7V to 5VDC
• Operating current: <10 mA

• Outside Diameter: 4mm
• Length: 100 mm (0.1 meter)
• Material: EN-31 (Hard Chromed)
• Application: 3D Printer, CNC, Robotics, DIY Projects, Machines etc
• Package Include 2 x 100mm long Smooth Rod

• Quick heat-up time: 25 watt soldering irons typically have a fast heat-up time, allowing for quick use without long waits for the tool to heat up.
• Lightweight and compact: due to the lower power output, 25 watt soldering irons are often smaller and lighter than higher wattage models, making them easier to handle and store.
• Lightweight and compact: due to the lower power output, 25 watt soldering irons are often smaller and lighter than higher wattage models, making them easier to handle and store.
• Interchangeable tips: some 25 watt soldering irons come with interchangeable tips of various shapes and sizes, allowing for versatility in soldering different types of components.
• Durability: high-quality 25 watt soldering irons are designed to be durable and long-lasting, with features such as heat-resistant handles and sturdy construction.

• Input Voltage: 230V AC
• Output Voltage: 12V, 12V or 0V
• Output Current: 1 Amp
• The transformer has cores made of high permeability silicon steel.
• Soft Iron Core.

• SMART LEARNING: Quad Store Smart Learning Robotics IOT comes with all the components required to learn basic to advance level.
• 4 ROBOT CARS can be built like (1) Line Following Car (2) Obstacle Avoidance Car (3) Light Following Car (4) Bluetooth Controlled Car
• BASICS: Now you have piece of mind to learn basic to advance level with just one kit.
• QUALITY: High quality components and modules are supplied with the kit. All DC motors are pre-soldered. Wires for Bluetooth module in L293d motor shield are also pre-soldered. Just one single battery holder with ON-OFF switch
• EASE OF USE: You can download the guide and source code for all projects using the link provide with the kit. Detailed tutorials which are self-explanatory

• Rated voltage (v) - 66, Current/ phase (a) - 1, resistance/ phase (ohms) - 6.6
• Holding torque (kg-cm) - 7.2
• NoOf leads - 6
• Step angle - 18 degree
• Frame size (mm) - 57x57, shaft length (mm) - 20.6

• dc Ball Bearing
• 10000 rpn up to

• 433Mhz RF Wireless Transmitter Receiver Module
• Packing Including One pair
• The transmission occurs at the rate of 1Kbps 10Kbps. The transmitted data is received by an RF receiver operating at the same frequency as that of the transmitter.
• Wide input supply (2.5 V to 12V) , Easy to integrate (V+, GND, and Data)