Industrial & Scientific Store - Robotics

• This is the most widely used soldering tips - slant tip conical shape - 900M-T-4C
• This type of soldering tip is ideal for solder fillet, which can be hardly formed with others shapes.
• Common uses: Soldering chip parts, Drag soldering, Pre-tinning lead wire, Point soldering, Melting and removing coil coatings [ Refer second image ]
• Copper based structure make better heat transfer performance
• Tips are made of professional grade raw material - made from oxygen-free copper with zinc coating. Resistance to high temperature

• This is a DB9 Male Screw Terminal to RS232 RS485 Conversion Board module having RS232 Serial DB9 9-pin to 9 Position Screw Terminal Block with shell and nut.
• Connector DB9 adapter terminals to facilitate commissioning equipment of project.

• ARINO MK2P RELAY BASE 8 PIN RELAY BASE ( 8 PIN ROUND ) MK2 RELAY BASE ST3 TIMER BASE ST3P TIMER BASE 8 PIN TIMER ADAPTER 8 PIN RELAY ADPTER 8 PIN ROUND RELAY BASE MK2PN ELAY BASE MK2P BASE MK2PN BASE
• Equiped with high-current relay : dc30v 10a ac250v 10a. Each relay has normally open and normally closed contact
• The 8 channels are optically isolated, safe, reliable, anti-interference
• Can be selected by jumper relay and ttl or ground

• Connect Type C cable for power, or 5V DC to pads marked IN+ and IN- on the left-hand side of the module
• Connect cell to charge to B+/B- pads on the right-hand side of the module.
• A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side
• Important! Disconnect load when charging
• The red LED indicates charging in progress, the green LED indicates charging has finished.

• Product name?Toggle Switch ?Easy to install: Mounting hole diameter: 12mm. Each of the terminals has a machine screw for quick connections, but also easy to be soldered.
• Package content: 2 Red PC Wear-resistant Handle toggle switch
• Type: ON/OFF/ON ?Connector Type: DPDT ?Power: 10A 250VAC / 20A 125VAC ?Position : 3 Positions?Pin Number : 6 terminals .
• Total Size(Approx) : 3.3 x 2.1 x 5.3 (l x b x h) cm
• The product has a Mechanical life: more than 80.000 cycles. Electrical life: more than 12, 000 cycles.

• Product Name: Potentiometer Control Knob; Knob Top Diameter: 11mm / 0.43\"
• Great for guitar amp knobs replacement.Can be used for synthesizers, electric guitar,etc
• Plastic control knob to be assembled to a potentiometer for easier rotation.
• Knob Base Diameter: 15mm / 0.59\"; Shaft Insert Diameter: 6mm / 0.24\", Knob Total Height: 17mm / 0.67\"; Material: Plastic
• Package Content: 20 Pcs x Potentiometer Control Knob,Color: Black Yellow; Weight: 73g; Total Size: 15 x 17mm/0.59\" x 0.67\"(Max.D*H)

• Material: Nylon.
• Length : 1000mm
• Inside Diameter : 10 x 10 mm
• Outer Dimensions: 10 x 18 mm
• A thickness of material: 1.86 mm, 2.67mm (end part)

• Wire Type: Multistrand
• Color: Green
• Length: 92 Meters
• Size: 42AWG
• Strands: 7

• Completely reusable
• Terminal Strips 630PTS
• Distribution Strips 200pts
• MB102 830 POINTS SOLDER LESS PCB BREAD BOARD PROTOTYPE BOARD
• ABS Plastic Completely reusable Coloured coordinates for easy component placement

• Operating voltage : 5V
• Rated current : 30mA
• Response frequency : 2048Hz
• Sound pressure : 80db/10cm
• Pin spacing : 8mm

• Soft leather, t fonts
• Wire length 10 cm Standard
• For standard 9 volt battery
• Pack of 10
• Color may vary

• Avail upto 100% Amazon Pay CASHBACK | Cashback details will be available in the package
• Tested and 100% Working
• IC 555 - 10PCS
• Mostly used in timing control operations

• Portable Design
• Special ball bearings for super high speed
• E-Type Motor Connection
• Equipped with a high torque brush motor
• Max. speed 35, 000 rpm