Industrial & Scientific Store - Robotics

• Microcontroller development board can be used can be used as appliance control
• Control DC or AC signals can control the 220V AC Load
• there is a normally open and open normally closed contact
• Useful to control a motor, a led strip, or any other module using PROGRAMMER
• How to use it: Just connect a digital output of your PROGRAMMER to your relay module, and you can control a power-demanding appliance with the digital signal provided by your circuit

• Input supply voltage: 6v28vdc
• The maximum output power: 80w
• The maximum continuous output current: 3a
• Duty cycle adjustable: 5 percent 100 percent
• Weight: 100 gms

• High-Capacity Prototyping: Themisto 400-pin breadboard in white color provides an extensive prototyping area with 400 interconnected holes, allowing you to build complex circuits and projects.
• Organized Design: The white color scheme not only adds a modern aesthetic but also enhances visibility for components and connections, making it easier to work on your projects without straining your eyes.
• Durable Build: Constructed with high-quality materials, this breadboard offers durability and reliability for long-term use. It's designed to withstand multiple insertions and removals of components and wires.
• Versatile Layout: The interconnected holes are laid out in a user-friendly pattern, following the standard DIP format. This arrangement accommodates various types of components, such as resistors, capacitors, ICs, and more.
• Jumper Wire Compatibility: Compatible with a wide range of jumper wires, this breadboard allows you to create flexible connections for experimenting with circuits. This versatility is perfect for both beginners and experienced electronics enthusiasts.

• CABLE TYPE: 2 pin. COLOR: Red and black.
• MATERIAL: Tinned copper wire, plastic head at each end.
• HIGH QUALITY AND WIDELY USE: Adopt environmental protection materials, cold and high temperature resistance, conductive, durable, widely used in electrical appliances, automobiles, robots, lighting, toys, PCB control panel, speakers, audio, batteries, toys, household appliances, etc.

• Cable length: About 21.4 cm/ 8.4 inch (m/ m), 20.7 cm/ 8.1 inch (m/ f), 20 cm/ 7.8 inch (f/ f)
• Including: 1 x 40-pin m/ f jumper wires, 1 x 40-pin m/ m jumper wires, 1 x 40-pin f/ f jumper wires
• Can be separated into the assembly containing the wire quantity you required and to support non-standard odd-spaced headers, suitable for arduino breadboard kit project, pcb project, pc motherboard, etc., Through the pin connection, without welding, fit for fast circuit test
• available in multicolour

• Working : This Controller will start motor by pressing start button of the controller and it will automatically switch OFF Motor, when the tank is full. User can press start button at any time they want
• Sensing element : carbon sensor, it is free from oxidation, long life. Also Suitable for MCB Starter panel see diagram above for connection. Power ON OFF LED Indication Provided. Motor ON OFF Indication provided. Tank Empty and Tank Full indication provided. high quality ABS enclosure. compact size
• Warranty: 1 Year Manufacture, Warranty Service : Replacement, Package contains : 1 Water level controller unit, 2 Sensors, 1 User Manual with all technical details, 1 Pack mounting screw
• Suitable for motor up to 5 HP. 40 A Load Capacity, Supply Voltage : 220-280 VAC
• Contact Details : if you need further details fell free to contact us. Company : Mivan Technologies. Contact Person: Mehta,

• High sensitivity ultrasonic range sensor
• Works with Arduino board
• Working Voltage - DC 5V, Working Current - 15mA
• Max Range - 4m, Min Range - 2cm, Measuring Angle - 15 degree
• colour: silver and weight: 41 gms

• Driver Model: L298
• Operating Voltage (VDC): 3 ~ 30
• Thermal Protection: Yes
• Cooling Fan: No
• PLEASE NOTE - external power supply needed for motors that consume more wattage.

• This Robotbanao Ultrasonic Sensor module is a transmitter, receiver, and a control circuit. It has a handy and compact build. The operation of this ultrasonic sensor is not affected by sunlight or black material like Sharp rangefinders (although acoustically soft materials like cloth can be difficult to detect).
• Measures the distance within a wide range of 2cm to 450cm | Stable performance | Accurate distance measurement | High-density | Small blind distance
• Dimensions: PCB size(LxW):45x20mm | Sensor cover diameter:16mm
• The Ultrasonic Sensor uses ultrasonic waves to determine the distance of an object. Therefore, it can be used as a distance measuring sensor. It can be used to measure the depth of water as waves can travel in water, detect and avoid obstacles in the path of a robot and also as a parking assist sensor.
• Working Voltage:5V(DC) | Static Current:Less than 2mA | Output Signal:Electric frequency signal, high-level 5V, low-level 0V | Detection Distance:2cm-450cm | High Precision:Up to 0.3cm | Input Trigger Signal:10us TTL impulse | Echo Signal:output TTL PWL signal | Model:HC-SR04 | Frequency(Hz):40000 | Sensing Angle:15 degree | Sensor Type:Ultrasonic | Output:Digital Sensor || Wiring: +5V(positive), Trig(control), Echo(receive), GND(negative)

• Quad Store Super Starter Uno R3 kit compatible with Arduino IDE
• Includes Quaduino Uno R3 compatible Uno R3 board. Kindly refer listing picture for details.
• Works flawlessly with IDE. All sensors and modules are compatible.
• Comes in attractive box packaging with Quad Store labels and parts list
• User guide and Source code to be downloaded using the link/scan code provided with the kit.

• 840 Points bread board
• 20 Pieces - male to male wires
• 20 Pieces - male to female wires

• This is a set of 120 male to male, male to female and female to female rainbow coloured jumper wires that can be used for interconnecting electronic components on breadboard or berg strips.
• quality | Durable | Reusable | Easy to install | Simple to use | Male to male | Male to female | Female to female
• Jumper cable length : 200 mm
• The jumper wires are a popular choice for construction or repair. These can be used for electronic projects and are great for prototyping as you can plug and unplug them easily.
• Compatibility : 2.54 mm spacing pin headers Number of pieces : 120

• Soldering Iron Features INGCO soldering iron have Long-life soldering iron tip, with Mica heating core, the lifespan is not less than 500 hours, max up to a lifespan of 20,000 solder joints.
• Top Function Design This soldering iron is designed with 304 stainless steel tube, surface laser printing treatment; Inner Mica heating core, 500 +hours useage time; Long-life soldering iron tip
• 3~5mins Pe-heat Time & Cool Handle ] -This solder iron contains an inner-heated Mica heating core with 60w, which could heat up to operating temperatures within 3~5mins pe-heat time. Heat-resistant handle can insulate temperature effectively to get a long cool handle.
• Safety first VDE certified plug and three-core power cord are used for safer use; Special INGCO exclusive two-color handle, more comfortable and professional;
• Wide Range of Applications -This soldering iron solders electronic circuit boards, computers, DIY home repairs, jewelry, and metal headdress. In addition, this soldering practice kit can be used for pyrography, carving words. Should you have any issues with the products, please contact us.

• It Can be used for 3-5V DC power supply modules. It has red power indicator.
• IR Infrared Obstacle Avoidance Sensor Module can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so on
• The output port OUT sensor module can be directly connected to the microcontroller IO port, you can directly drive a 5V relay
• It has a pair of infrared transmitting and receiving tube, tube infrared emit a certain frequency, when detecting direction meet with obstacles (reflecting surface), reflected infrared receiving tube, after the comparator circuit processing, green indicator will light up, at the same time signal output interface to output digital signal (a low level signal).
• Obstacle sensing LED and Power LED

• Model - N20 DCMotor
• Easy to use
• Provide by SP Electron
• Most Saleble product

• 40 pc male to male jumper wire ;Each cable length about 20cm or 8-inch
• The male ends meant for insertion into standard 0.1 inch (2.54mm) female sockets and the female ends are meant for insertion onto standard 0.1 inch (2.54mm) male headers
• Suitable for Arduino breadboard kit project, PCB project, pc motherboard, etc
• Through the pin connection, without welding, fit for fast circuit test.