Industrial & Scientific Store - Robotics

• Package content: techleads ldr light sensor optical photosensitive senosr module for arduino (2 pcs)

• Application areas: remote control helicopters,micro robots,robotic arms,boats,etc.
• Interface Type: compatible with JR & Futaba interface.
• Operating Speed: 0.12sec/60 degree(4.8V)~0.1sec/60 degree(6.0V).
• Dead band width: 5 ?s, Operating Voltage : 4.8V~6.0V.
• Package Content: 2 Pcs SG90 9G servo motor.

• This is a set of 120 male to male, male to female and female to female rainbow coloured jumper wires by Robotbanao that can be used for interconnecting electronic components on breadboard or berg strips.
• Durable | Reusable | Easy to install | Simple to use | Male to male | Male to female | Female to female
• Jumper cable length:200mm
• The jumper wires are a popular choice for construction or repair. These can be used for electronic projects and are great for prototyping as you can plug and unplug them easily.
• Compatibility:2.54mm spacing pin headers | No. of pieces:120

• Each LDR is QC tested
• Maximum voltage: 150 Volt DC
• Maximum wattage: 100 mW; Spectral peak: 540 nm
• Light resistance (10 Lux): 50-100 Kohm; Operating temperature: - 30 ~ + 70 degree Celsius

• Can be Used With hydroponics, Salt water Tank, Fresh water tank, Gardening, aquariums for power head control, Pet bowls, fish tanks, filtration, RO , Water Coolers, Water Filters ,Dosing pumps etc.
• Features : Float Can Be Reversed For NO / NC By Opening Bottom Lock as Per Your Requirement / Contact : NO / NC
• Stem Material : PP Corrosion Free , Technology : Magnetic Advance Technology , Wire Length : 2 Meter ,
• Ideal Operating Ratings : Voltage: 2 to 50V DC .Current: 1amp / Max Current : 1.2A (DC), Max Switch Watt : 10W
• Switch Configuration : SPST , Float Ball Material: PP With excellent Acid and alkali / alkaline resistance , WIRE : Premium Tin Coated 14/40 Single Core For High Performance

• Torque - 1.8 kg-cm
• Weight - 9g

• Quick heat-up time: 25 watt soldering irons typically have a fast heat-up time, allowing for quick use without long waits for the tool to heat up.Quick heat-up time: 25 watt soldering irons typically have a fast heat-up time, allowing for quick use without long waits for the tool to heat up.
• Lightweight and compact: due to the lower power output, 25 watt soldering irons are often smaller and lighter than higher wattage models, making them easier to handle and store.
• Interchangeable tips: some 25 watt soldering irons come with interchangeable tips of various shapes and sizes, allowing for versatility in soldering different types of components.
• Durability: high-quality 25 watt soldering irons are designed to be durable and long-lasting, with features such as heat-resistant handles and sturdy construction.
• Ergonomic design: An ergonomic handle can provide a comfortable grip and reduce hand fatigue during extended use.

• What You Can Get 1pcs 20V INGCO cordless soldering Iron,a piece of stand,
• 3~5mins Pe-heat Time & Cool Handle ] -This soldering iron contains an inner-heated Mica heating core with 40w, which could heat up to operating temperatures within 3~5mins pe-heat time. The heat-resistant handle can insulate temperature effectively to get a long cool handle.
• 40W Soldering Iron Features INGCO cordless soldering iron has a Long-life soldering iron tip, with Mica heating core, the lifespan is not less than 500 hours, with max up to a lifespan of 20,000 solder joints.
• Top Function Design This soldering iron is designed with 304 stainless steel tube, surface laser printing treatment; Inner Mica heating core, 500 +hours useage time; Long-life soldering iron tip
• Wide Range of Applications -This soldering iron solders electronic circuit boards, computers, DIY home repairs, jewelry, and metal headdress. In addition, this soldering practice can be used for Radio controls, hobbies and crafts, small electrical parts,etc

• Coil Voltage 5VDC
• PCB Mount Package

• Please note Tapo H100 Hub is required for it to function and is not included; purchase one from ASIN B0BCWNBNTK
• Fast & Accurate Monitoring Detects temperature and humidity with high-accuracy Swiss-made sensor. Obtaining and update data every 2 seconds. (Accuracy: ?0.3 degreeC, ?3% RH??
• Home Automation Automatically turns on/off home electronics when settings fall outside their preset ranges.
• Free Data Storage & Visual Graphics Records temperature and humidity data and generates periodic data summaries.
• App Notification Alerts Receive instant alerts on your phone whenever levels fall outside preset ranges.
• Flexible Installation Hang it with a lanyard, attach it on a surface with an adhesive or magnet, or simply place it on a desk.

• Smart Professional Soldering Iron -Heat and impact resistant design of screw thread so the iron head is not easy to drop.
• Adjustable Heating Temperature -This Soldering iron is capable to produce constant and controlled desired Temperature from 200 - 450 degrees Heat up fast and work great.
• Specification - Voltage: 220V, Power: 60W with Length of cable: 1. 5 m, Length of handle: 18. 7cm.
• Note:- Package include only 1*soldering Iron. (Bits are not provided in this pack.)

• Driver Chips: New And Original Dual H-Bridge Driver Ic L298n Power-Driven Part Of The Terminal Range Of Vms: +5 V ~ +30 V Drive Some Peak Current Io: 2a
• Logical Part Of The Terminal Supply Area Vss :3.3-5 .5 V Logical Part Of The Operating Current Range: 0 ~ 47ma Control Signal Input Voltage Range: 4.5-5.5v Low High 0v Maximum Power Consumption: 25w
• Logical Part Of The Terminal Supply Area Vss :3.3-5 .5 V Logical Part Of The Operating Current Range: 0 ~ 47ma Control Signal Input Voltage Range: 4.5-5.5v Low High 0v Maximum Power Consumption: 25w Storage Temperature: -25 C ~ +130 C Driver Board Size: 43 * 43 * 27mm

• Fully Automatic Operation with Manual Mode Selection
• Capacity upto 2 HP
• Corossion Free Shock Proof Float Sensors 2 meter wire
• Water level indication led's
• With Optional Underground Tank Installation

• A soldering iron is a tool used for joining two metal pieces by melting and flowing a metal alloy (solder) between them.
• Soldering irons are commonly used for repairing electronic devices, creating jewelry, and assembling small metal parts.
• Soldering irons are commonly used by DIY electronics enthusiasts, hobbyists, and professionals in various industries, such as automotive repair, computer repair, and electronic assembly.
• Safety precautions should be taken when using a soldering iron, including wearing eye protection and avoiding inhaling fumes from the melting solder.
• Power output: 25 watts is a lower power output, making it suitable for delicate electronic components that require less heat to avoid damage.

• 30 watt corded tool assists you in soldering metal decorative pieces to toys, gadgets and wires
• It has a 1 meter long cord and includes an additional soldering tip and a safety stand
• Iron reaches the working temperature within 12 seconds and the maximum temperature within 2 minutes
• It has a specially designed copper with Nickel tip which can withstand high temperatures
• It reaches the maximum temperature of 371 degree celsius
• It has a perfectly designed grip which is made of engineered plastic.
• It comes with a safety stand which helps the user store/place the soldering iron during use
• 6 Months warranty offered on the product from the date of purchase
• The product is manufactured by Stanley Black & Decker with registered trademarks

• A soldering iron is a tool used for joining two metal pieces by melting and flowing a metal alloy (solder) between them.
• Soldering irons are commonly used for repairing electronic devices, creating jewelry, and assembling small metal parts.
• Soldering irons are commonly used by DIY electronics enthusiasts, hobbyists, and professionals in various industries, such as automotive repair, computer repair, and electronic assembly.
• Safety precautions should be taken when using a soldering iron, including wearing eye protection and avoiding inhaling fumes from the melting solder.
• Power output: 25 watts is a lower power output, making it suitable for delicate electronic components that require less heat to avoid damage.