Industrial & Scientific Store - Robotics

• BBC Micro:bit Development Board is Included! Contains 45 kinds of sensors like led lights, temperature sensor, i2c LCD, sound sensor, PIR motion sensor, etc. and usb cable, jumper wires for microbit connection.
• This 45 sensor kit has everything you need to start a project for all beginners or students learning about electronics and coding. Perfect for 10 years or older!
• Excellent PDF Tutorials provided, 45 projects with detailed guidance, work with the microbit software. All projects code can be found on web tutorials as well.
• Each project has circuit diagram and verified code. You can make different fun projects such as Ultrasonic Ranging, Fire Alarm, Play Music, Pressure Detection, LCD dispaly and so on.
• This microbit kit has many parts that there is basically no limit to what you can build, easy to use. Technical support is always available!

• PRODUCT SIZE & PACKAGE - 19.6 inch X 4 ft (50cm X 122cm), 20 mesh, Aperture 0.77mm/0.03inch, wire diameter 0.5mm/0.02inch; 2.3kg/5lb. NOTED Package: The stainless steel mesh screen is rolled in mailing tubes with caps, intact packaging, no creases.
• PREMIUM MATERIAL - The stainless steel mesh screen are made of high-qualified 304 stainless steel, mesh is well made. anti rust, anti acid and alkali, anti-corrosion, and long service life. High temperature resistance, high strength, strong tensile, wear resistance. The smooth surface facilitates quick cleaning.
• 304 STAINLESS STEEL MATERIAL - Durable, very stiff and heat resisting and not rusty, mesh screen roll is cut with tin snips, because it's sturdy, you can cut off any shape you need.
• WIRE MESH SCREEN PRECAUTIONS - Because the mesh screen is rolled up and put into the mailing tubes with caps, and the screen is strong, before you use the screen, please wear gloves, please flatten the screen under a full flattening surface under load, and then use tin scissors to cut carefully.
• MULTIFUNCTION FINE MESH SCREEN - Wire mesh screen can be used for security mesh, building meshes, It's also suitable for a variety of filtration, dust removal and separation, such as septa, sieve powder, or air conditioning, range hood, air filter, petroleum, chemical and other industries filtering. It was an easy material to handle, this material for any application that would be satisfied by fine mesh metal screen.

• High Performance Rock-solid data output: 3-axis XYZ (Pitch Roll Yaw) Acceleration+ Gyro+ Angle+ Magnetic field+Quaternion, measurement range and output rate ( 0.2-200Hz) selectable
• Robust Design Equipped with 32-bits processor, SCA3300 temp-compensation MEMS module, military-grade RM3100 magnetometer-compensation chip, ensuring high performance in the harsh environment
• Military-Grade Inclinometer Angle measurement accuracy at 0.05 degree(X, Y-axis), Low-drift of the Z-axis angle, Automatic data correction, Large signal-noise immunity
• WITMOTION Advantage 8-year Professional Attitude Measuring Solution Provider, sensors integrated R&D dynamic fusion algorithm and Kalman Filtering, ensuring stable data output and excellent bias stability, low noise level, increasing measurement accuracy
• Worry-free Support 12-month warranty, lifetime friendly customer service by WitMotion team. Option 1. The tutorial link is printed on the guiding card inside the package. Option 2. search wit-motion(dot)com and download the complete tutorial. Option 3. contact us if you need any help, support (at) wit-motion (dot) com

• The Bondtech BMG-M extruder combines high performance and resolution with low weight. Together with our proven and highly celebrated Dual-Drive technology you can expect problem free material feeding.
• This extruder is optimized for the Mosquito / Mosquito Magnum hotends with and integrated torque lock system to make the interface very strong and makes nozzle changes a breeze.
• The housing parts are professionally SLS printed in nylon for maximum strength and precision.
• This extruder only supports 1.75 mm size filament.

• Working voltage DC 0 to 32V. Maximum total input current 30 Amps. 18 Channels output, each channel maximum output current 3 Amps (Factory-installed fuse value 3 Amps, you can replace the fuse to support up to 10 Amps.)
• Input terminals pitch 7.62mm/0.3\", maximum current 30 Amps for per position, wire size 26~10 AWG, stripping length 8mm, Metric M3 slotted screw. Support power supply expansion connect to other modules.
• Output terminals pitch 5.0mm/0.197\", wire size 26~12 AWG, stripping length 7mm, Metric M2.5 slotted screw.
• Fuse holders for Medium Blade ATO/ATC Fuse, the fuse can be removed and replaced very easily. With fuse fail indication function, when you connected load and the fuse has blown or has been unplugged, fail indication LED will turn on.
• FR-4 fiberglass dual copper layers PCB. Taiwan High quality fireproof nylon material mount carrier(not China low quality carrier). Also included two M3 x 10mm wood screws, you can easily mount it on a wooden board.

• OPEQUE Skin Colour Body
• Main Cord 110 - 220 AC
• SMPS 5AMP 220 AC
• Output 12 V
• Zooming Knob Function

• 1. Up to 0.05% output accuracy 2. 6-digit display 3. Output functions: DC voltage, resistance, thermocouple, and thermal resistance
• 4. 10 thermocouple scales 5. 4 thermal resistance scales 6. High precision automatic cold junction compensation for thermocouple outputs
• 7. Manual stepping and automatic stepping and ramping 8. Stores and recalls setups

• Parameters: Power:2.2KW; Horsepower: 3HP; Input Voltage: 220V+/-15%; Output Voltage: 220V; Input Frequency: 50-60 Hz; Output Frequency: 0-1000 Hz; Input Phase: Single-Phase; Output Phase: Three-Phase; Current: 12.5A
• Features: no PG vector control and V/F two speed control modes;8-stage simple PLC function, multi-speed control and PID control;Support multiple frequency settings: digital setting, analog setting, PID setting, RS485 communication setting
• Functions: I/O terminals can be programmed to combine multiple working modes according to user needs; With instantaneous power-down retention function;With over torque and under torque detection
• More Functions:Automatic voltage adjustment function to effectively solve the low frequency oscillation problem of high power motor;Provide a variety of fault protection functions: overcurrent, overvoltage, undervoltage, overheat, overload, lack of equal etc
• Wiring: L/N: Input power terminal; U / V / W: Input output terminal, connected to three-phase motor;DC+ / DC- : DC output + terminal, DC bus output terminal is used for connecting external brake unit or common DC bus system.;DB: Brake output terminal, connecting brake resistor between DB and DC+; PE: Earthing terminal

• 360 Photo Booth Accessories Short Shaft Motor
• Please compare with the picture to confirm the correct motor before purchasing

• Specifications of Motor: Holding Torque: 2N.m; Current: 4.2A; Peak Current: 6A; Phase: 2; Size: 57x57x76 mm; Step Angle: 1.8 degree; Motor Lead Wire: 4-wire; Encoder lines: 1000; Insulation Class:B; Motor Weight:2.4 LB
• Specifications of 2HSS57 Driver: 2-Phase Hybrid Stepper Servo Driver; Frequency: 0-200KHz; Insulation resistance: >=500M?; Voltage: DC 24-50V input;Pulses response frequency can reach 200KHZ; 16 kinds microsteps choice,highest 51200 microsteps/rev
• Advantages: Stepper motor closed loop system,never lose step; The stepper motor control has a new generation of 32-bit DSP. The vector control technology can increase the accuracy of the motor; Improve motor output torque and working speed; Automatic current adjustment based on load
• More Functions: It supports over-current protection, over-voltage protection, position outside the tolerance protection.The build-in place in position and alarm output signal can help the upper monitor to monitor and control,the function of position ultra difference alarm can ensure the machine work safely
• Widely used: Closed loop stepper system can be applied to all kinds small automatic equipment and instrument,such as milling machine, engraving machine, special industrial sewing machine, stripping machine, marking machine, cutting machine, graph plotter, cnc machine, automatic assembly equipment and so on;This motor driver kit fits all types of machine load conditions without adjusting the gain parameters

• Model:JSS57P2N; Specifications: Type:Hybrid; Encoder line number:1000; Motor length:57x57x76mm;Shaft Diameter:8mm; Total length:107mm; Lead wire: 4pcs; Support DC Power Supply:DC24-48V,recommended DC36V; Current:4.2A
• High Precision: It is a new motor-driven integrated hybrid servo drive system with communication function.Using a new generation of 32-bit DSP control and closed-loop control, it can prevent out-of-step and ensure the accuracy of the product
• High speed torque: high-speed torque attenuation is much lower than conventional open-loop drives, which can greatly improve the high speed performance and torque of stepper motors.Support modbus RTU protocol on RS232, position and speed control controlled by communication
• High Hardness: The motor is made of metal with high hardness, which is sturdy and durable. The matte texture of the side wall can increase friction
• Widely used: Suitable for robots, textile machinery, special industrial sewing machines, wire stripping machines, marking machines, cutting machines, plotters, CNC router, milling machine, engraving machines etc

• Leading manufacturer of high quality tools
• Made to withstand even the most demanding jobs
• Internationally known for our wide range of products
• All our products have been developed with the requirements of the professional in mind
• Trustworthy, designed and used by experts

• Powerful ESP32-S3 Chip: The M5Stack CoreS3 is powered by the advanced ESP32-S3 chip, offering improved performance and enhanced capabilities for IoT projects.
• Built-in Wi-Fi and Bluetooth: The CoreS3 comes with built-in Wi-Fi and Bluetooth connectivity, allowing seamless wireless communication and integration with other devices.
• Integrated Camera Interface: This development board features an integrated camera interface, enabling users to easily connect a camera module for capturing images or implementing computer vision applications.
• Expandable Modular Design: The CoreS3 follows M5Stack's modular design philosophy, making it compatible with various stackable modules and expansion boards. Users can easily extend its functionality by adding sensors, actuators, or displays.
• A rduino-Compatible Development Platform: With support for the A rduino ecosystem, the CoreS3 offers a familiar programming environment for developers to create IoT projects using C/C++ or A rduino IDE.

• power consumption: 48W (24V)
• Ceridium code: 1.3m.
• Peak resistance: 2 ohms or less
• Suitable for station equipment: FX 951, FM 203, FM 206.
• Import to Japan