Industrial & Scientific Store - Robotics

• This unit is 40% more powerful than the two models it is replacing to help get your soldering job done faster
• Easy to handle high performance 70W soldering iron with a heat-resistant silicon Cable for safe handling
• Temperature stability (+/- 4?f, 2?c) and temperature lock protects tips and components, affording a consistently high quality process with repeatable soldering results
• This unit is loaded with cutting edge features sun as intuitive navigation, a Standby mode and auto setback conserves energy and password-protection to Preserve settings
• Includes: one (1) We1 station 120V, one (1) Wep70 tip retainer, one (1) Wep70 iron, PH70 safety rest with sponge, and Eta tip 0.062"/1.6 mm screwdriver

• Heavy duty iron that develops 900 degrees F.
• Stainless steel barrel and heat and impact resistant handle .
• Solder iron rest included.

• Portable

• Specs: Tilt & Trim Motor, Voltage: 12, Rotation: RE, Dimension: Replacement Unit:, OD: 3.063in / 77.8mm, Shaft OD: 0.315in / 8mm, Length: 5.795in / 147.2mm, Terminal Size (2): Female Spade, Shaft: 3.8mm W x 7.5mm H Tang, Note: Used With Oildyne Pump, Brief: US Marine
• Replaces OEM Numbers: ARCO MARINE: 6231, ARROWHEAD: TRM0102, J & N: 430-22153, LESTER: 10843, Misc MANUFACTURER: 722451
• 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. But in a rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you, contact us for a replacement.
• 100% New Aftermarket Tilt & Trim Motor built to meet OEM specifications

• BIGTREETECH Manta M8P Control Board uses 32-bit ARM Cortex-M0+ series STM32G0B1VET6 main control chip with a core frequency of 64MHz. High-performance MOSFETs are used to reduce heat generation
• The power chip of Manta M8P integrated main control board adopts TPS5450-5A, which supports DC12/24V power input; the output current of this chip is up to 5A, and the peak value can reach 6A, which perfectly supports the power supply of Raspberry-Pi
• The control board and the core board use BTB connection method, so that other core board solutions other than CM4 can be selected, such as BIGTREETECH CB1. The mainboard reserves the SPI expansion interface for using the Klipper firmware to connect an external acceleration sensor for acceleration compensation
• The thermistor can select the pull-up resistance value through the jumper, which supports PT1000 without external modules, which is convenient for DIY use; the control board reserves a three-way four-wire fan interface, which can be used to connect a water cooling device
• The MCU firmware can be upgraded through SD card, or through DFU through Klipper's make flash command; the main board reserves the proximity switch interface, supports NPN and PNP type selection, (24V, 12V, 5V) voltage optional, shared with VFAN6 Voltage selection

• 3220 Solderless Breadboard plus Electronics fun kit,Compatible with Arduino and Raspberry Pi
• Power Supply Module,Include a good range of LEDs, resistors, buttons, capacitors, a few transistors and diodes.
• 140 pcs U-shape Solide Copper Jumper Wires plus 65 PCS Copper Jumpers Meet your project expetation
• Better improvement on product quality and durablity
• Perfect for Arduino/Raspberry Shield Prototyping and Testing. Powered by Makeronics Technology

• Type of product: Direct drive stirrer; Stirling shaft diaxLength (mm): 8x350
• Type of fluid: Water; Stirring capacity (Litres.): 20 Litres
• Motor: AC/DC 1/8 HP; Min. speed (RPM): 300
• Max. speed (RPM): 4000; Digital speed indicator: No

• Warranty: 2 Year,Fully Tested.
• Constructed from high quality material.
• Easy to install, fast response,stable performance.
• Part Number: 89463-E0012, 5WK9 6667B
• We provide 100% perfect customer service, please contact us if you have any question.

• HEAVY DUTY SOLDERING STATION

• The WEP 948DQ-II Fume Extractor & Soldering Station includes a detachable soldering iron, soldering iron holder, tip cleaner, 3 soldering tips, 8 activated carbon filters, solder wire dispenser, 35g solder wire. Satisfying your need for a solder smoke absorber, and a soldering station.
• This fume extractor can be used as a soldering fan to effectively adsorb harmful particles from the fume generated by soldering project. Combining a soldering station into the compact size of a fume extractor, you can save precious desk space without having to purchase two separate devices. The fume extractor and soldering station comes with individual power switches, and you can turn them on individually or together.
• The recommended operating distance is 3.9 inches, and comes with activated carbon filter from both the front and rear. The internal fan comes with 5-blade design, with fenders fitted on the left and right side. The fenders prevent disruptive airflow from impacting the effective fume extraction, further improving the effective adsorption effect. This cleanses your work environment and protects your health.
• The soldering iron station's LED digital display provides clear reading and shows parameters include: PID temperature stabilization indicator, F/ C conversion function, sleep mode (10-minute), and automatic shut down functions.
• The WEP 948DQ-II is covered by our exclusive 1-year USA technical support, with 24-hour assistance from our dedicated team. Note: This product is rated for 110-127V USA specifications. Do not connect this iron to a 220V power socket.

• [Soldering Helping Hands with 10X Magnifying Lamp]: Using our soldering helping hand allows you to focus more on your precision work. Our soldering helping hand comes with a 4.3\" real glass magnifier that clearly magnifies small objects by up to 10X, providing a clear area of magnification for repairing circuit boards, soldering, sewing, crafts, jewelry making, electronics and other precise and detailed activities. Our magnifying light also allows you to adjust the color and brightness of the light, allowing for 5 color changes from warm to cool, as well as 10%-100% brightness adjustment. The lighted magnifier is perfect for fine inspection and solder.
• [4 Ultra-Strong Magnetic Helping Hands]: Our magnetic gooseneck helping hands are designed to be 2 long and 2 short for more usage. Each gooseneck helping hand has a super strong magnetism on the bottom, just place it on our metal base for perfect fixation, or feel free to move the third-hand tool to create more convenience for your work. Our gooseneck arms are extremely flexible and can be bent and adjusted at will to easily accommodate projects of all sizes, freeing up your hands for hands-free purposes.
• [Upgraded Alligator Clips]: Our soldering magnifying glass is equipped with flexible and adjustable magnetic gooseneck arms and strong alligator clips to ensure precise positioning of PCBs. Our alligator clips have thicker, more heat-resistant rubber protectors, so you can use our alligator clips to better protect the parts you are working on. We've also upgraded our alligator clips by widening the grip to fit your finger size, making it easier and more comfortable to press.
• [Convenient Head Switch Button & Flexible Swing Arm]: Our switch is at the head of the lamp, no need to bend down to find the switch, reach up, and control the switch easily. Our soldering light comes with 2 attached swing arms, 3 knobs, and 4 springs. The swing arms extend up to 18 inches in length and can be flexibly angled to make your work more comfortable and precise, creating the best working experience. It is ideal for complex electronic repair, jewelry making, and other fine crafts.
• [Multi-purpose tool]: Our soldering magnifier with light can be transformed into different tools according to individual needs. The magnifying lamp can be used with a metal base with an alligator clip assistant for precision welding, electronic repair, and jewelry making, crafts, painting, model, close work and hobby; it can also be used with a separate fixture to separate the magnifying lamp from the alligator clip assistant; or it can be used as a standalone desk lamp without the alligator clip assistant. Best gift for anyone who needs fine work.