Industrial & Scientific Store - Test, Measure & Inspect

• 1. The high-voltage isolation probe has an over-range alarm function and is indicated by a red LED for easier use.
• 2. The high-voltage isolation probe is small in size, beautiful in shape, firm in structure, durable in use.
• 3. This oscilloscope differential probe offers high stability, long service life, reliability and precision.
• 4. The high-voltage isolation probe uses a differential input mode and is primarily used in locations where high-voltage floating measurements are required.
• 5. With 1/50 and 1/500 attenuation, the differential mode measurement range is 130V (DC+peakAC) and 1300V (DC+peakAC).

• Graduation: 0.0001''
• Two interchangeable anvils - Flat & Round precision ground and hardened
• Nice Fitted Case
• Measuring Range: 0-1'' X 0.0001''

• 100 MHz bandwidth
• Real-time sampling rate up to 1 GSa/s,Record length up to 14Mpts
• Serial bus triggering and decoding (Standard), supports protocols IIC, SPI, UART, CAN, LIN
• Advanced measurements on full memory (14 Mpts)
• Large 7-inch TFT-LCD display with 800 * 480 resolution

• DURABLE PVC MATERIAL: Each of the 12-pack safety cones is made of 100% eco-friendly PVC material, which is wear-resistant and weather-resistant, can withstand extreme temperatures and weather without fading or cracking for long periods
• IMPACT RESISTANCE AND RECOVERY: Upgraded PVC material gives the traffic cones good flexibility, and can withstand vehicle rolling and impact, after 180 twisting and extrusion, it can be quickly restored to its original state
• 360 HIGHLY VISIBLE: Orange traffic cones with reflective collars are highly visible during the day and at night, even in unfavorable conditions such as fog, rain, snow, etc
• EASY TO STORE: 12 Pack, each cone can be overlapped continuously, taking up very little space in your car or garage. This makes storage easy, so you can carry your traffic cones with you at your convenience
• WIDELY USED: These traffic safety cones feature 14\" x 14\" high-density weighted base that won't easily blow over in the wind for maximum stability. They can be used in a variety of settings, including gardens, parking lots, roads, construction sites, sports places, and squares

• Measurement range for series of 0 up to 6\", and resolution of 0.001\"
• Vernier scale on barrel for precise measurements in fine units
• Includes 0.176\" diameter measuring rods for flexibility
• Ratchet thimble and locking clamp for uniform pressure and accuracy
• Ground, hardened, and lapped base for durability and accuracy

• 407026 PC interface with heavy duty light meter
• Percentage displays differential from reference point
• Enhance accuracy by selecting lighting type tungsten/daylight, fluorescent, sodium, mercury

• .Features: Natural diffusion sampling method and high-sensitivity sensor, with high sensitivity and repeatability. Large LCD, more intuitionistic, abundant and clear indication.
• Range: Working environment : -20? to 50?, Humidity :?95% RH (no dew) ; Accuracy : 5% F.S. Range For H2 : 0-1000ppm (L-Alarm : 50ppm; H-Alarm : 150ppm); Resolution : 1 ppm
• Technical Specifications: Response Time : 30s; LCD displays real-time and system status; Power Source : DC 3.7V Li-on battery, 1800mAh
• Charging time : 6 - 8h ; Working time : 8h continuously (without alarming); Protection Grade: IP65
• Scope of Supply: 1 Unit of Bosean BH-4A Multi Gas Detector and Instruction Manual. Applications: Underground Channels, Mining Industry

• 6 kinds of hardness values (HL, HB, HRC, HRB, HV, HS) in real-time measurement
• Camera: 640?480 pixels (900 BMP format pictures could be stored)
• Hardness Tester with Inbuilt Thermal Printer, Support thermal printing
• Mobile phone Bluetooth APP and PC software analysis data
• One hardness tester can be equipped with 7 different impact devices

• Features pH, Conductivity, TDS, DO Salinity, mV & Temp. Measurements Turbidity Measurement (Model : LJ-191) Colorimetric Measurement (Model : LJ-171) Both Turbidity & Colorimetric Measurement (Model : LJ-172) Mains cum Battery Operated Available in ABS Plastic Briefcase

• Audible continuity buzzer confirms that a circuit is capable of conducting current

• DIFFERENTIAL TEMPERATURE: The DL429B calculates differential for you saving time on the jobsite and making your work easier and more efficient.
• ? AC/DC AMPS: Our Clamp Meter Measures AC/DC Amps up to 600A and DC Microamps to 2000?A. This capability cuts down your need to have multiple tools on the jobsite
• HANDS FREE: Our clamp meter includes an easy-to-read backlight dual display with a magnetic mount for hands free operation. The unit also includes a work light to illuminate dark areas and test lead storage for easy transport
• ALL-IN-ONE METER: The DL429B is a top-of-the-line True RMS clamp meter with enhanced capabilities for every industrial setting. Our Multimeter measures AC/DC Volts, Capacitance 2000?F, Frequency 99.99kHz, diode testing, duty cycle, continuity, and Resistance 60M?.
• TRUE RMS 6000 COUNT DISPLAY: This industrial clamp meter features True RMS providing accurate measurements on any type of load. Our Meter also has LRA Inrush to accurately check starting power
• ENHANCED SAFETY: The DL429B provides increased safety with a 600V CAT III safety rating. There is also Non-Contact Voltage to identify live lines. There are input jack locks to protect your meter from blowing a fuse. The DL429B comes with a 2-year limited warranty. All warranties must be redeemed in the US.

• Soldering Microscope Workbench The latest upgrade in 2024, LM249MS PLUS with welding workbench, upgrades the bracket set on the basis of the original LM249MS, and accommodates the application of Heat Resistant Soldering Mat, Soldering Helping Hands, Tools Holder, making the digital microscope more comprehensive and making your workbench no longer messy. With the ability to switch between three lenses and a large 10-inch HD screen, it supports connection to an external display and your PC, making this a true all-rounder
• Multi-purpose 3 Lens in One Free switching of the 3 microscope lens: Welding Lens L (240X), Digital Lens A (720X), Microbial Lens D (2040X). Soldering microscope, coin microscope and biological microscope kit--- Three Powers in One, more than just a helper for welding work, it adds more fun of exploration
• Universal 13 inch Boom Arm Stand Equipped with the newly upgraded stands available for soldering digital microscope that has a boom arm ( Size: 7 * 7.8 * 13inch, 45mm ). More than just a taller column and larger base, the retractable arms allow for more working space
• UHD 2160P Video Microscope 10.1 inch IPS screen, 178wide viewing angle, supports ultra high definition 2160P videos and 1080P photos output. No lag, great picture quality and true-to-life color visual experience
• HDMI & USB Output for Bigger View Connect LINKMICRO HDMI microscope to external monitor or PC with HDMI or USB interface to get a larger field of view, plug and play, better finish for presentations or live streaming
• Professional Assistant for Electronic Repair Professional telephoto lens L can reach 240X With 13 inch boom stand, ensuring sufficient working space and large magnification at the same time. the 0402 SMD resistance are clearly available
• Best Choice for Coin Collector Lens A of LM249MS digital microscope can capture a coin in full. With the upgraded stand, object distance up to 13 inch. Dime, penny, nickel, quarter, dollar, even the large silver dollar, it's easy to get the entire coin view. Captured images can be stored as photos and videos to share with others
• High Magnification Microbial Lens D Not just a tool for soldering and coin collectors, it can easily transform into a home lab. An observation table with a bottom light source, prepared slides, an insect box and tweezers are included. The versatile microscope lens D has a high magnification 2040X, suitable for cell level observation, slides observation. Explore the micro world with your little one in free time

• 8 Step Test Calibration Block Step Wedge for Thickness Ultrasonic Thickness Gauge #1018 Steel 1.0'' 2.0'' 3.0'' 4.0'' 1.5'' 2.5'' 3.5'' 4.5'' with Air-tight Plastic Storage Box

• 8 mm camera head
• waterproof cable 5 m length
• For ACDelco ARZ Inspection Camera series