Water Level Controller By HELICS

• Low Voltage ( 130V), High Voltage (270V) & Overload Protection. [With Amp. Adjustable Knob]
• Inbuilt water level Upper and lower bath tank control
• Both tank empty & feeling LED indications
• Auto and manual slide switch.
• Why & What Is Run Capacitor? :- The Run Capacitor Is Inbuilt Provided In The Device. The Run Capacitor Provides Support To The Motor During Its Running Or Operational time And This Run Capacitor Is of 50.mfd, Therefore, It Can Operate on upto 1.0 To 1.5 Hp. Motor

• Low Voltage (Below 290V), High Voltage (Above 480V) & Overload Protection (as per inverse time current characteristics) & SPP (Single Phasing Protection).
• Inbuilt time delay system (Protection from suddenly high power when main supply resume)
• Indication for Motor ON, High / Low Voltage , Overload & both upper & lower tank level indications
• Auto mode available to easy controlling (Auto Fill and Auto Off features available)
• Inbuilt water level, Upper and lower both tank level control. & Variable Current (Amp) setting.

• Automatic Submersible Starter With Water Level Controller With inbuilt Running(36.mfd) Capacitor.
• Suitable for 0.5 To 0.75 HP/ Inbuilt Water-level Controller for Overhead and Underground Tank. / Auto & Manual Slide Switch Options.
• Low Voltage (130V), High Voltage (270V) & Overload Protection. [with Ampere Adjustable Knob]
• Tank Status (Empty / Filling) Indication's by LED's Provided on Controller./ High Voltage, Low Voltage and Overload State of Motor Indicated by LED's Provided on Controller.
• Why & What Is Run Capacitor? :- The Run Capacitor Is Inbuilt Provided In The Device. The Run Capacitor Provides Support To The Motor During Its Running Or Operational time And This Run Capacitor Is of 36.mfd, Therefore, It Can Operate on upto 0.5 To 0.75 Hp. Motor

• Fully automatic water level Controller. (If using it with submersible panel, than panel only with run capacitor will compatible with this device)
• Compatible with Mono-block Motor and Submersible Panel.
• Suitable for 0.5 to 3.0 HP For Mono-Block Motor / For Submersible Motor it Depends on your Submersible Panel's Start & Run Capacitors. (Contact Us for More Details)
• Overhead and Underground Tank Controllable?(With Automatically Start Features)

• Low Voltage ( 130V), High Voltage (270V) & Overload Protection. [With Amp. Adjustable Knob]
• For Mono-Block Motor only. Inbuilt water level Upper and lower bath tank control
• Both tank empty & feeling LED indications
• High low overload and auto, LED indications
• Auto and manual slide switch.

• For 2 H.P/2 Tank's Controllable With Capacitor:- Run(36+36 mfd.) and Start(50 mfd.) Capacitor
• Low Voltage (130V), High Voltage (270V) & Overload Protection.[With Amp. Adjustable Knob]
• High / Low overload and Auto / Manuel LED indications with Empty & Full tank LED indications too.
• Why & What Is Run Capacitor? :- The Run Capacitor Is Inbuilt Provided In The Device. The Run Capacitor Provides Support To The Motor During Its Running Or Operational time And This Run Capacitor Is of (36+36 mfd.), Therefore, It Can Operate 2.0 Hp.
• Why & What Is Start Capacitor? :- The Start Capacitor Is Inbuilt Provided In The Device. The Start Capacitor Is Provided Because With Time And Regular Use Some Of The Motors Don't Start Or Get Required Pick Up On Its Own So Here The Start Capacitor (72.mfd) Provided Gives Extra Support To The Motor So That Motor Can Get Its Pick Up And Start Without Any Problem.

• Low Voltage (130V), High Voltage (270V) & Overload Protection.[With Amp. Adjustable knob]
• Inbuilt water level Upper and lower bath tank control
• Both tank empty & feeling LED indicate. With High low overload and auto, LED indicate.
• Why & What Is Run Capacitor? :- The Run Capacitor Is Inbuilt Provided In The Device. The Run Capacitor Provides Support To The Motor During Its Running Or Operational time And This Run Capacitor Is of 36.mfd, Therefore, It Can Operate on upto 0.5 To 1.0 Hp. Motor
• Why & What Is Start Capacitor? :- The Start Capacitor Is Inbuilt Provided In The Device. The Start Capacitor Is Provided Because With Time And Regular Use Some Of The Motors Don't Start Or Get Required Pick Up On Its Own So Here The Start Capacitor (50.mfd) Provided Gives Extra Support To The Motor So That Motor Can Get Its Pick Up And Start Without Any Problem.