Water Level Controller By RMG

• Visible Attractive LEDs for showing the tank level.
• Has an Audible buzzer alarm. Mute button is provided for stopping the buzzer sound. Very compact and portable design.
• A DIY product. Does not need any expertise person to fix it.
• Supports both contact type and magnetic float sensors. Microcontroller based intelligent circuit.
• Long lasting and User Friendly. 12 months warranty.

• Supports Single Phase AC230V. Suitable for Sump to Tank set up (Underground tank or ground level tank to Overhead tank set up).
• Checks the low level of water in sump
• Has Power ON, Motor ON LED and SUMP LOW LED indications.
• Has MANUAL mode and AUTO mode functions. In AUTO mode, AUTO ON and AUTO OFF operation occurs. In MANUAL mode, the motor pump will be constantly running. By changing to AUTO mode, automatic operations occur.
• Suitable for motor pump operated by normal ON/OFF Switch or MCB.

• Can Access or Control your devices from anywhere in the world at anytime
• User Friendly Mobile App. Easy method of scanning through QR code.
• Live Status of Water Tank Levels, Pump ON/OFF status. Dry run sense time and reset time can be set as per user choice through the AppAny number of members can access the App. Any number of devices can be added in one device
• FOTA feature. All Firmware Updated Through the Air. 1 yr warranty
• Smart controller is suitable for motor pump operated by simple switch/mcb. Note - Our Smart device needs input power supply 230VAC

• Suitable for motor pump(Monoblock, Jet pump, etc.) operated by simple ON/OFF switch or MCB.
• Has the facility of setting L/H Voltage, O/U Load Current, Cyclic ON/OFF Timer, Power ON delay/Reset Time, Trip time, Dry Run Reset time and for changing the Password.
• Attractive 7 segment display with soft touch switches. Also has user friendly menus.
• Auto, Manual and Semi-automatic operations. Password Protected settings.
• Long life. Easy access. Advanced Embedded Technology.

• 1. Suitable for motor upto 1.5 HP that are operated by simple switch or MCB
• 2. Four levels of indication 25%, 50%, 75% and 100% is given using bright Red Leds. These LEDs increase the visibility to the users even from long distance.
• 3. No hassles of cabling from tank to ground floor. 3. Minimizes the installation and cabling cost. Also minimizes the expenses of rewiring due to wear and tear of the cable.
• 4. Very Compact and Handy. Advanced embedded technology is used.
• 5. Easy trouble free installation. Highly durable with Long life and 1 year warranty

• Suitable for three phase motor pump. Any HP. Supports Submersible DOL Starters.
• Suits for borewell motors. Has Dry Run protection. Has Low/High Voltage protection
• Contact type sensors - 5 nos. Dry run sensor - 1 no. will be in the package
• 2 years manufacturer warranty
• Long Life. Easy to install. Advanced Embedded Technology

• Power On Led Indication Is Provided. Below The Power On Indication, Is The Motor On Led Indication.
• The Motor Gets Switched On Automatically When The Water Level In The Tank Becomes Low. The Tank Starts Filling Up. When The Water Level Reaches The Higher Level, The Motor Automatically Gets Switched Off. Motor On Led Indication Goes Off.
• Auto/Manual Mode Switch Is Provided. Auto Mode: In Auto Mode, Auto On And Auto Off Operation Occurs. In Manual Mode, The Motor Pump Will Be Constantly Running.
• Easy To Operate. Easy To Install.
• 12 Months Warranty.

• Supports Single Phase AC230V. Suitable for Borewell to Tank set up (Underground or Corporation line water to Overhead tank set up).
• Has LED indications for Power ON, Low/High Voltage, Dry Run, Motor ON. Also has High and Low level LED indications to know the level of overhead tank
• Dry run protection. Low/High Voltage protection. Corrosion free sensors
• Has MANUAL mode and AUTO mode functions. In AUTO mode, AUTO ON and AUTO OFF operation occurs. In MANUAL mode, the motor pump will be constantly running.
• This controller unit has a semi-automatic function (Manual ON and Auto OFF function). Just keep the controller in MANUAL mode for the motor to get switched ON and then change it to AUTO mode for Automatic OFF.

• Supports single phase AC 230V and suitable for sump to tank set up (underground or ground level tank to overhead tank set up)
• Has LED indications for power on, low/high voltage, dry run, motor on and also has 4 level LED indications for the tank (25%, 50%, 75% and 100%) and 3 LED indication for sump level (33%, 66% and 100%) it is both controller and indicator
• Dry run protection and low/high voltage protection and corrosion less sensors
• Has manual mode and auto mode functions and in auto mode, auto on and auto off operation occurs and in manual mode, the motor pump will be constantly running
• This controller unit has a semi-automatic function (manual on and auto off function). just keep the controller in manual mode for the motor to get switched on and then change it to auto mode for automatic off

• Supports Single Phase AC230V. Suitable for Borewell to Tank set up (Underground or Corporation line water to Overhead tank set up).
• Has LED indications for Power ON, Low/High Voltage, Dry Run, Motor ON. Also has Four level LED indications to know the level of overhead tank
• Dry run protection. Low/High Voltage protection. Corrosion free sensors
• Has MANUAL mode and AUTO mode functions. In AUTO mode, AUTO ON and AUTO OFF operation occurs. In MANUAL mode, the motor pump will be constantly running.
• This controller unit has a semi-automatic function (Manual ON and Auto OFF function). Just keep the controller in MANUAL mode for the motor to get switched ON and then change it to AUTO mode for Automatic OFF.

• Advanced wireless fully automatic water level controller helps to switch on the motor when water level of tank is low and switch off when it becomes full. It has 3 devices - 1 Outdoor Transmitter for overhead tank (OHT), 1 Indoor Transmitter for Underground tank and 1 Controller
• Outdoor Transmitter can be fixed near the OHT. It has a rain proof IP-65 enclosure. It has inbuilt rechargeable Li-Ion battery powered by solar panel. Indoor Transmitter can be fixed near the sump. It needs Input AC 230V. Controller can be fixed near the motor control switch. It needs Input AC 230V
• This product covers the distance of 700 to 1000 meters RF range in line of sight.
• Suitable for Sump to Overhead Tank SetUp. Suitable for motor pumps that are operated by simple switch/MCB
• Has Low/High Voltage, Dry Run and Fuse Protection. | Has 1 year manufacturer warranty.