Home Improvement Tools & Testers By NOYAFA

• Fault distance: Measures cable length and display the distance to fault, graphical wire mapping, opens, shorts.
• PoE & PING: PoE: identify PoE presence and detect how much voltage. PING: to test network performance, data packet, min & max time.
• AC Filter: Tone trace cable with complete AC Interference Rejection, available on common switch & PoE Switch, much stronger than other tracers on markets.
• Hub blink: To locate network port by the flashing port light on a server/switch/hub/router port.
• Addtional Benefits: TF card included to export data to PC ++Voltage detector: included in receiver (90-1000V) ++Rechargeable Lithium battery for more efficient work.

• Lan Tester

• 1.NF-8209 is a new generation to offer AC filter and analog signaling all in one network toner and probe. It has three modes for options to track cable like AC filter mode, analog mode and PoE mode.
• 2.It includes cable length measurement , cable faults testing, PoE testing, hub blink and NCV function, all these makes it a must-tool for cabling engineers.
• 3.Identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard).Locate network port by the flashing port light on Hub / Switch. Available to 10M/100M Hub/ switch.
• 4.Measure cable length and locate fault distance accurately for lan cable. the range is 200m.That means it's equipped with the most powerful cable location technologies for any work environment.
• 5.Test physical status for STP, UTP lan cable. Detect AC voltage presence (50V-1000V).

• 1. Trace and locate Rj45 (stp/ 4-core), Rj11, usb, bnc cables without ac current noise
• 2. Hub blink for locating network port by the flashing port light on hub/ switch
• 3. Measure cable length for Rj45, bnc cable
• 4. Check open, short, cross, crosstalk for Rj11, Rj45, bnc cable
• 5. Tone tracking short or breakage point
• Included Components: Pcb

• CABLE TYPE ?RJ45 CAT5, CAT5E, CAT6, CAT6A , RJ11 / RJ12 telephone line CAT3 (6P2C/6P4C/6P6C) POE test /Router-to-wire
• ETHERNET TESTER ?cable tester for problematic shorts, opens, cross-pairs, and other wiring faults, HOST & REMOTE,Remote viewing of cables,the maximum test distance is 1000m.
• QC FUNCTION ?Quick test results (open circuit, crossover, straight through, Short circuit), quickly detect the crimping condition of the crystal head, Special shielded network cables can also be measured(UTP/STP).
• POWERED TEST - 60V network & cable testers Quickly judge the power supply type and power supply status of the POE switch, and prompt the battery and low voltage,LED visual display of results.
• LITHIUM BATTREY CHARGING & LONG LIFE ?ethernet cable tester NOYAFA NF-468CS easy to use, new upgrade,used in home, industry and other fields,Auto shutdown function.

• CABLE TYPE ?RJ45 CAT5, CAT5E, CAT6, CAT6A , RJ11 / RJ12 telephone line CAT3 (6P2C/6P4C/6P6C) POE test /Router-to-wire
• ETHERNET TESTER ?cable tester for problematic shorts, opens, cross-pairs, and other wiring faults, HOST & REMOTE,Remote viewing of cables,the maximum test distance is 1000m.
• POWERED TEST - 60V network & cable testers Quickly judge the power supply type and power supply status of the POE switch, and prompt the battery and low voltage,LED visual display of results.
• QC FUNCTION ?cat 5 tester Quick test results (open circuit, crossover, straight through, Short circuit), quickly detect the crimping condition of the crystal head, Special shielded network cables can also be measured(UTP/STP).
• LITHIUM BATTREY CHARGING & LONG LIFE ?ethernet cable tester NOYAFA NF-468CS easy to use, new upgrade,used in home, industry and other fields,Auto shutdown function.

• Professional Fiber Optic Tester - Multi-function Design NOYAFA NF908S mini fiber optic tester adopts four-in-one design, which combines optical power meter, cable test and LED lighting functions, network line finder. The fiber optic tester adopts hidden type, built-in RJ45 cable tester, which is detachable and easy to use.
• Fiber Optic Tester NOYAFA NF908S, fiber optic tester, universal for FC/SC/ST/LC interfaces, used to measure fiber loss. Can measure 6 standard wavelengths 850/980/1310/1480/1550/1625nm Measurement range: -60~8dBm Accuracy: 850/980nm?0.5dB.
• RJ45 detection function RJ45 interface design, no additional preparation is required. Applicable to RJ45, CAT5, CAT5e CAT6, CAT6A CAT7, CAT8 cables. A multi-functional machine that can be used flexibly to meet your testing needs.
• NF908S Line Finder has line tracker, scanning and REF functions, continuity test function, does not damage the line casing, quickly locates the breakpoint, can check fiber breakage, winding, etc. The fiber optic cable tester supports LED lights, you can turn on the lighting to operate normally at night or in a dark environment
• Portable and Easy to Use The fiber optic tester adopts a portable design, which is small and convenient. It can be easily put into pockets, backpacks, etc. It is easy to carry and can help you use it anywhere. The fiber optic photometer is built-in and automatically shuts down after 30 minutes of no operation. Equipped with a USB charging cable, it can be charged without changing the battery, which can save costs.
• Excellent Service Lifetime Friendly Customer Service - If you have any questions about the use of the product or suggestions, please feel free to contact us and we will reply you within 24

• [Network cable scanning] Three scan modes selectable: Digital model/ Analog mode/ PoE mode.
• [Cable continuity testing] Test physical status for STP, UTP lan cable.
• [Cable length measurement] Measure cable length and locate fault distance accurately for lan cable.The cable type is CAT5e,CAT6,CAT6a(STP&UTP). The test range must be 2.5m~200m.
• [PoE Testing & Port Flash] Test the information of PoE device, such as PoE voltage, power supply polarity, power supply mode. It can also identify which the type of PSE (at/af standard) If it is standard PoE device. If it is no-standard PoE device, it only display ?non-standard?. Locate network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch.
• [Non-contact voltage detecting] Detect AC voltage presence (50V-1000V). You can press the \"Power/Set\" button on the receiver, if the \"NCV?indicator is light on, then you can use the receiver to detect AC voltage presence.