Home Improvement Tools & Testers By Klein Tools

• Digital Clamp Meter measures 2000A AC/DC, 1000V AC/DC, 60M?.Clamp measures AC and DC current.
• Rugged Klein ''TOUGH METER'' industrial design stands up to jobsite demands; built to withstand a 6.6-foot (2m) drop.Dedicated mode for capturing Inrush Current.Non-contact voltage tester integrated into the clamp.
• Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy.CAT IV 600V, CAT III 1000V, Class 2, double insulation safety rating.Backlit display for clear visibility in environments with low ambient lighting.
• Low impedance (LoZ) mode for identifying and eliminating ghost or stray voltages.Audible continuity, capacitance, diode test, frequency and duty cycle, min/max feature, data hold capability.Test leads measure AC/DC voltage, resistance, continuity, frequency, duty-cycle, capacitance and diodes.
• Low battery indicator and easily accessible battery compartment.Powers off automatically after 30 minutes of non-use to conserve battery life.Includes carrying case (instruction manual), straight input test leads, and 2 x AAA batteries.

• RELIABLE CIRCUIT TRACING of energized or non-energized breakers, fuses, and wires
• DETECT TRANSMITTED SIGNAL through drywall, cement block, and underground with easy to adjust sensitivity levels
• TRACE WIRE, CONDUIT OR PVC PIPES or trace a single wire in a bundle for versatility
• AUDIBLE AND VISUAL INDICATORS on receiver denotes signal strength
• NCV FUNCTION AND FLASHLIGHT on receiver for additional functionality

• Klein Tools Multi Groove Fiberglass Fish Tape
• Item Package Quantity: 1
• Number of Items: 1

• TONE AND PROBE: For use with the Digital Tracing Probe (Cat. No. VDV500-223; sold separately)
• WIRE MAPPING CAPABILITIES: Utilize wire mapping capabilities to verify Pin-to-Pin connections and shield detection (Cat. No. VDV500-223 required; sold separately)
• TRACE UNSTRIPPED WIRES: Rugged Angled Bed of Nails (ABN) clips securely attach to wires
• RJ45 PORT: Easily test RJ45, RJ11, and RJ12 data cables
• CONTINUITY AND POLARITY TESTING: Results for continuity and polarity tests are displayed on LEDs that are clearly labeled and easy to read

• SINGLE BUTTON CABLE TESTER for testing of RJ11, RJ12 and RJ45 terminated voice and data cables
• TESTS CAT3, CAT5E AND CAT6/6A cables
• FAST, RELIABLE LED RESPONSES indicate cable status (Pass, Miswire, Open-Fault, Short-Fault, and Shield)
• CABLE EASILY PASSES through connector and trims flush to end face
• CONSISTENT AND SECURE TERMINATIONS allow cable to easily pass through connector to visually ensure wires are in correct order
• 5 COLOR ASSORTMENT to color code cables
• STRAIN RELIEF BOOTS are CAT5E AND CAT6 cable compatible

• HVAC PROFESSIONAL KIT: Includes HVAC Digital Clamp Meter, Dual IR/Probe Thermometer, and Dual Range Non-Contact Voltage Tester with Flashlight
• VERSATILE CLAMP METER: CL320 measures AC current and NCVT via clamp; AC/DC voltage, resistance, continuity, frequency/duty cycle, DC microamps, diode test and capacitance via test-leads; temperature via thermocouple
• TEMPERATURE MEASUREMENT: Dual IR Probe and Thermometer (Cat. No. IR07) measures temperature from -40 to 572?F (-40 to 300?C) with infrared thermometer and includes a temperature probe for air vents and ducts
• DIFFERENTIAL TEMPERATURE: Calculate differential temperature (T1-T2) using both IR and probe temperatures, with a hands-free hanging hook for the temperature probe
• VERSATILE VOLTAGE DETECTION: Dual-range Non-Contact Voltage Tester (Cat. No. NCVT3P) detects voltage from 12 to 1000V AC or 70 to 1000V AC with visual and audible indicators
• BRIGHT FLASHLIGHT: Integrated flashlight illuminates the work area and can be used independently of the voltage detection function
• NOTE ON USAGE: IR07 Thermometer is not intended for medical or animal use, and it is designed for professional HVAC applications

• CLEAR COLOR LCD DISPLAY: Circuit Analyzer with large color LCD provides easy-to-understand results for wiring faults, AFCI, GFCI, voltage drops, and device trip time
• COMPREHENSIVE WIRING FAULT DETECTION: Detect and identify common wiring faults in standard, AFCI, and GFCI electrical outlets, ensuring thorough evaluation
• DUAL WIRING FAULT DETECTION: Capable of detecting dual wiring faults, including open neutral and open ground, enhancing safety measures
• AFCI AND GFCI DEVICE INSPECTION: Inspect AFCI and GFCI devices, measuring trip time and trip current for accurate functionality assessment
• LOAD TESTING CAPABILITIES: Conduct 12A, 15A, and 20A load testing to measure percentage voltage drops, providing valuable insights into electrical performance
• AUTO POWER OFF: Automatically powers off after 5 minutes of inactivity, conserving battery life and ensuring long-term usage
• DETACHABLE CORD: Detachable cord allows for easy storage, providing convenience and organized handling of the Circuit Analyzer

• Test, map and identify up to 8 locations in a single step
• Cuts testing and identification time in half
• Includes: 7 Test-n-Map Remotes (#2 - #8), 8 threaded male to push-on female coaxial push-on F adapters, 8 RJ45 jumper test cables, Test-n-Map Remote Verification Test Cable (18-Inch), zipper bag
• Included jumper cables connect the Test-n-Map Remotes to wall outlets
• Use the Test-n-Map Remote Verification Test Cable (included) to conduct a validation test or another cable that is at least two feet in length
• Requires Klein Commander, Scout Pro LT or Scout Pro 2 Tester -- sold separately
• Zipper pouch holds all of the pieces in one place

• Measures AC current via the clamp, and AC/DC voltage, resistance, and continuity via test leads.Wide jaw for measuring current in cables up to 3/0 sizes; accommodates cables of diameter up to 0.58-Inch (14.7mm)
• Measures AC current via the clamp, and AC/DC voltage, resistance, and continuity via test leads.Non-contact voltage tester integrated into the jaw.
• Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy.
• Jaw and Housing: CATIV 600V/CATIII 1000V; Electrical: CATIII 600V/CATII 1000V; Class 2, Double Insulation
• Rugged Klein ''TOUGH METER'' is built to withstand a 9.9-Foot (3m) drop.Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations.Includes a carrying case, test leads and 2 x AAA batteries.

• Klein Tools

• Mid Flex Glow Rods provide medium, balanced flexibility for a wide range of wire install applications
• Glows bright yellow for immediate identification of flexibility and improved visibility in low-light environments
• Protective Splinterguard coating helps keep hands free of fiberglass splinters
• Durable stainless steel connectors reinforce connection between all Klein fish rods
• Includes internal attachment canister to store attachments directly inside fish rod tube; convenient storage location prevents loss or damage to attachments
• Includes bullet nose and hook attachments to affix and grab wires
• Includes illuminated tip (U.W. Patent 9,062,834) for improved locating the end of the fish rod at distance

• VERSITILE HVAC CLAMP METER: Measures AC current, inrush and NCVT via clamp; AC/DC voltage, resistance, continuity, frequency/duty cycle, DC microamps, diode test and capacitance via test-leads; temperature via thermocouple
• NON-CONTACT VOLTAGE TESTING: Integrated into the clamp jaw for convenient electrical testing
• DUAL VOLTAGE + CURRENT DISPLAY: Backlit LCD shows voltage and current simultaneously for easy readings in any lighting condition
• ACCURATE MEASUREMENTS: Auto-ranging and True Root Mean Squared (TRMS) technology provides precise and accurate measurements
• CONVENIENT FEATURES: Test lead holder on the side of the clamp and optional magnetic hanger (Cat. Nos. 69445 or 69417) for hands-free operation
• ADDITIONAL FEATURES: Max/Min, Inrush, Data Hold capability for enhanced functionality and auto-power off to conserve battery life
• COMPLETE PACKAGE: Includes carrying case, test leads with CAT III/CAT IV safety caps, alligator clips, K-Type thermocouple, instructions, and 3 x AAA batteries

• TONE AND PROBE: For use with the Digital Tone Generator (Cat. No. VDV500-163; sold separately)
• TRACE ON ACTIVE NETWORK: Probe traces cables and wires on an active network when used with the Digital Tone Generator (Cat. No. VDV500-163 required; sold separately)
• USE IN DARK SPACES: Tip features a work light for use in low-light environments
• WIRE MAPPING CAPABILITIES: Utilize wire mapping capabilities to verify Pin-to-Pin connections and shield detection (Cat. No. VDV500-163 required; sold separately)
• REPLACEMENT TIP: Includes responsive, durable, and replaceable non-metallic conductive tip
• 60Hz FILTER: Incorporates a 60Hz filter to ensure accurate tracing
• ONE PUSH POWER BUTTON: LED light indicates when power is on

• AC/DC Digi Clamp Meter Auto-Ranging 400 Amp

• VERSATILE FUNCTIONALITY: Measures AC/DC voltage up to 600V, 10A AC/DC current, 50M resistance; additional features include continuity, temperature, capacitance, frequency/duty cycle and diode test
• LEAD-ALERT PROTECTION: LEDs on the meter illuminate to indicate proper test lead placement, enhancing accuracy and safety during measurements
• REVERSE-CONTRAST DISPLAY: Large, high-visibility reverse-contrast LCD ensures improved viewability in all lighting conditions
• ACCURATE MEASUREMENTS: Auto-ranging and True Root Mean Squared (TRMS) technology provides precise and accurate measurements
• PORTABLE DESIGN: Slim profile allows the multimeter to conveniently fit into most pockets, making it easy to carry and use on the go
• DURABLE CONSTRUCTION: Built to withstand a 6.6-Foot (2 m) drop, perfect for use in facilities, maintenance, HVAC, residential, business, automotive, and light-industrial work
• COMPLETE PACKAGE: Includes carrying case, test leads with CAT III/CAT IV safety caps, thermocouple, instructions, and 2 x AAA batteries