Electricals Store - International Power Adapters

• Safety and Save time: No soldering required! Our IIC I2C Logic Level Converter comes pre-soldered, Simply plug it in and start enjoying seamless voltage conversion without the hassle.
• Protect Your Components: Our converter acts as a reliable buffer, shielding your devices from voltage mismatches and potential damage, providing a cost-effective safeguard.
• Compatibility: Seamlessly interface your 5V and 3.3V devices with our IIC I2C Logic Level Converter. It's the ultimate solution for ensuring your for Raspberry Pi, and other microcontrollers communicate flawlessly, no matter the voltage disparity.
• Enhanced Signal: The bi-directional logic level converter is a small device, which can safely steps down 5V signals to 3.3V and steps up 3.3V to 5V at the same time. Say goodbye to signal loss and voltage mismatch issues.
• Multi-Channel Versatility: Each logic level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side.

• 1A-10A: The current of this motor speed controller can be adjusted from 1A to 10A, and it is easy to set up.
• FIT 12V AND 24V: Suitable for motors whose voltage is 12V with a power less than 120W and which is 24V with a power less than 200W.
• EASY CONNECTION: The positive and negative of the motor can be connected in one way or another. Change when the direction of rotation is not as expected.
• CONVENIENT: Turn the knob to change the output to change the engine speed.
• MAKE SURE THE CONNECTION IS CORRECT: Make sure the positive and negative polarity is connected correctly, otherwise the controller will be damaged.

• The XL6009 module is a non-isolated step-up voltage converter featuring adjustable output voltage and new generation(XL6009E1 core chip) high-frequency(400KHZ) switching technique, the performance is much better than LM2577.
• Designed for multiple practical applications that need a boost voltage, such as DIY an output adjustable mobile power, temporarily set up power supply in the outdoor, charge your electronic devices etc.
• Input Voltage: DC 3V to 30V (optimum working voltage range is 5V to 30V).
• Output Voltage: DC 5V to 35V (continuously adjustable), maximum output current is 4A.
• Ultra-compact power module with simple operation. Using a mini screwdriver to step up / down output voltage by turning slotted screw on the blue trimpot, and monitor voltage with multimeter to achieve the expected voltage, clockwise to reduce voltage and counterclockwise to increase voltage. (1 circle means +/- 1V)

• 1.DC to DC Boost Converter 600W high power booster module, wide voltage input: 10V ~ 60V, 12V ~ 80V adjustable wide voltage output; output current can be adjusted; ultra-low input and output pressure difference.
• DC to DC Boost Converter Specifications: Radiator bottom plate thickness 5mm, tooth height 21mm, length 85mm, width 63mm, booster plate fixed above the radiator, rational design, integrated design of radiator and booster plate, convenient for users to use directly, use long screws fixed directly.
• DC to DC Boost Converter The module has a constant voltage and constant current function, but it is a non-isolated boost mode, due to its characteristics, the constant current range depends on the input and output voltage and load.
• DC to DC Boost Converter Please Power on the module first, then connect the load, which is especially important in high-power loads; the input voltage should be stable, especially when some low-voltage (12V) input power supply is connected to the load voltage, it will fall below 10V, and it is easy to break down the power tube at this time.
• DC to DC Boost Converter Two or more modules can not be used in parallel input and output, otherwise the current limit function will be invalid

• DC 24V to DC 12V Step Down Converter. (15-40V Wide Range Input) Max Current 3A 36W.
• Waterproof alloy housing makes the converter ideal for use in a wide range of applications including vehicles, security systems, hospital equipment, telecommunications etc
• Built-in over-voltage, under-voltage, overload, over-heat and short circuit protection
• The length of the line is about 12CM, slim, small volume, easy installation.
• High quality and performance. 3 Year Warranty.

• Durable material: It is made of the copper wire and flame retardant plastic shell make it have good conductivity,.it is long lasting and durable for you to use.
• Package including: 2 Pack of power Converter Module. DC converter module. It has current limiting, short circuit and over temperature protection. Even if the output is short circuit, it will not burn out the module and it is safer.
• Input and output: input voltage: DC8V-35V, 12V changes to 5V; Output current: 3A max; No-load current: 10mA; Output power: 15W max.
• Feature: DC to DC converters have micro USB charging ports they can compatible with most electronic devices.High reliability, strong vibration resistance, good electromechanical performance. Small size, high efficiency, and the conversion rate is as high as 96 percent, easy to install and use.
• A wide range of applications: Used for GPS navigation, car radio, car audio, monitoring system, bus display screen, taxi advertising screen, traffic recorder, LCD TV, LED.

• Line Output Converter
• Handles up to 30 watts of input power
• 2 Channel
• Compact Design

• PWM converts digital into analog (0 to 10V).
• Input digital can be 5V or 24V level PWM ; Output analog can be 0-10v voltage or 0-5v voltage.
• PWM receiving frequency range: 100HZ-3KHZ. Recommendation 1KHZ-3KHZ.
• Can be used for industrial control panel PLC or other interface switching.This module is easy to wire and convenient to use.
• Your satisfaction is our priority. If there is any quality problem of our product or you are not happy with your purchase in our store, please kindly us and we are always ready to help.

• International Plug Adapter for Travel: Our all in one adapter has 4 different plugs built in which covers over 150 countries: Type C Plug: Most of Europe, France, Germany, Italy, Spain, Iceland, Greece, Israel; Type G Plug: UK, Ireland, London, England, Scotland, Dubai; Type I Plug: China, Australia, New Zealand; Type A Plug: USA, Japan, Canada; so it is perfect for your worldwide travel
• 3 USB-C and 2 USB-A Universal Power Adapter: The 3 USB C ports can charge up to 3.0A/15W, and the 2 USB A ports can charge up to 2.4A/12W, so our travel adapter is ideal for your USB devices, especially laptop, smartphone, tablet, power bank, camera, etc. All the USB ports output: 5.6A/28W max
• 6 in 1 Travel Adapter Worldwide: In addition to 5 USB ports, there is also a universal AC outlet that converts plugs of US, EU, UK, AU, so you can plug electronics from different countries (except India and South Africa) into socket of this european travel plug adapter. Max capacity up to 2500 watt (max 250 Volt, 10 A)
• Portable and Safety: Compact Size and lightweight design to fit into luggage and backpack. As a universal power adapter, it is made of durable polycarbonate shell and thermal protection layer. This US to UK Plug Adapter has built-in double 10 amp fuse and safety shutter design to ensure that you and your devices are fully protected
• Note: It is not a voltage converter; This International power adapter plug is only compatible for 100V to 250V wide voltage device, especially your hair dryer, straightener, electric toothbrush or razor need to support 100V to 250V dual voltage, otherwise you may need a voltage converter

• UK Travel Adapter
• Euro plug
• Colour: white

• Max Voltage Rating 58V Single MRBF Terminal Fuse Block 250A, IP66
• Fuses Holder Stud Size: M8 (5/16\") Fuse Holder Mounting Hole: M10 (3/8\")
• Solated stud design uses standard M8 hardware and permits stacking of terminals
• The battery terminal fuse kit is mainly made of ceramic, the seat material is PPS UL.94-V0 thermoplastic
• Compact, high-amp fuse appropriate for DC Main, inverters, windlass, and bow thruster circuit protection

• Small size and light weight, ideal for traveling to anywhere, very convenient
• It is mainly used to convert input and output voltage between voltage in different foreign countries
• It can meet the use of various small appliances(under 30w)
• Dual channel voltage Converter from 110/120V to 220/240V, also can change from 220/240V to 110/120V
• Imported materials, high performance transformer and special circuit manufacturing, with long serving life

• Mini DC-DC 3A power step down adjustable module buck converter, ideal for DIY mobile power supply, monitor power supply.
• The Output Voltage: 4V ~ 24V; Input Voltage: 5V
• Output Current: 3A (Max); Conversion Efficiency: 97.5% (maximum)
• NOTE: Do not reverse the positive and negative terminals to avoid other damage.
• Package Content: 5 * Mini DC-DC 3A Power Step Down Adjustable Module.

• LM2596HVS DC-DC adjustable step-down power supply module, the actual use of materials, input and output are used 48V capacitor, input with (SW-high on-off) to enable the terminal to facilitate external control.
• Non-isolated buck regulator output (Buck module requires input voltage is higher than the output voltage); Input voltage range: 3.2V-40V (continuous maximum 40V or less); Output voltage range: 1.25V-35V (continuous adjustable output default delivery).
• Output current: rated current 2A, the maximum 3A (need to add heat sink), if need to work long hours, it is recommended to add heat sink.
• Switching frequency: 150KHz; Minimum voltage difference: 3V; Full load temperature rise: 40 C; Load adjustment rate: 0.5%; Voltage adjustment rate: 0.5%; Dynamic response speed: 5% 200uS.
• Wiring method: welding; output with indicator light,Note: This is thestep-down module, the input voltagemust behigher than the out put voltage.