Electricals Store - International Power Adapters

• Input voltage range?4?38V (Note:input voltage not over 38V)
• Output voltage range?1.25-36VDC adjustable.Output current: 0-5A,Output power: 75W
• High conversion efficiency up to 96%
• Updated Version: updated from LM2596 and better than it, with reverse voltage protection, over-temperature and short-circuit protection, thus making it much safer to use
• 100% SATISFICATION SERVICE: If there are any problem with our products, please feel free to contact us. you can request a refund for any single module and no need to return it.; Any problems you can contact us and we will try our best to resolve it till you satisfied.

• South Africa to Europe Schuko Grounded Adapter
• Type M to Type E/F
• 250V-Max 13A
• Lifetime Warranty

• The bi-directional logic level converter is a small device, which can safely steps down 5V signals to 3.3V and steps up 3.3V to 5V at the same time.
• This level converter works with 2.8V and 1.8V devices, it can bidirectionally transfer with 4 channels between high logic voltage and low logic voltage.
• Each logic level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side.
• The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the ?HV pin, low voltage (3.3V for example) to ?LV?, and ground from the system to the ?GND pin.
• Package Include: 12* IIC I2C Logic Level Converter Bi-Directional Module

• 1.4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection.
• The first time the load is connected, the output is automatically turned on. If the load is less than 50MA, The output is turned off after 30 seconds; if the load is greater than 50MA, the output is continuously turned on.
• In discharge mode (The charging mode KEY function is invalid), trigger the KEY port once to open the output; continuously trigger the KEY port twice to close the output.
• Applications:It can be used for Car charging retrofit; Driving recorder power supply; Mobile power/ charging treasure; Portable devices such as mobile phones and tablets, household power supply, fast charging adapter, etc.
• Package included:10pcs 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 186 50 Lithium Battery Charging Boost Mobile Power Protection PCB Board Module

• Size: 1.6 x 0.8 x 0.45 mm / 0.06 x 0.03 x 0.02 inch (L*W*H); Tolerance: 5%; Package Model: 0603; Package Type: Surface Mount Device; Resistor Value: 10R-1M; Resistor Power: 1/10W
• Advantage: With stable electrical performance design, durable and strong shock resistance, strong anti-interference ability and high frequency characteristics, giving you a comfortable working experience.
• Instruction: Easy to install, suitable for Surface Mounted Devices, can effectively maintain the normal operation of the machine.
• Application: The 0603 chip resistor is a useful electronic accessory that can effectively protect the circuit and data transmission to prevent breaking to external equipment. Widely used in a variety of technology equipment such as projector equipment, computers, meters, household appliances, personal digital assistant, communication devices and mobile hard disks, etc.
• Note: Please note that your device needs to be for the chip resistor's package type and use it in the appropriate temperature range.

• 0402 (40mil*20mil) 1% 0 ohm to 10M ohm 65 Values 3250PCS SMD resistor kit, 50pcs/value.
• Resistors Set 1% Tolerance are Used for DIY Project,Teaching,Ring Doorbell,Led Turn Signals,Light,Product Development,Student
• 0R 1R 2.2R 3.3R 4.7R 5.1R 10R 15R 22R 33R 47R 51R 62R 82R 100R 120R 150R 180R 200R 220R 240R 270R 300R 330R 470R 510R 560R 680R 820R
• 1K 1.2K 1.5K 1.8K 2K 2.2K 3K 3.3K 4.7K 5.1K 6.2K 7.5K 8.2K 10K
• 12K 15K 18K 20K 22K 33K 43K 47K 51K 68K 75K 82K 100K 200K 300K 390K 470K 680K 820K 1M 2M 10M

• GREAT PERFORMANCE: This 13S 48V/54.6V protection board has high voltage withstanding and low conduction resistance function.
• MULTITUDINOUS EFFECT: This 15A BMS lithium battery protection board has stable various protective functions for charging and discharging, such as accurate overcharge protection, over-discharge protection, over current protection and short circuit protection.
• SEPARATED CONNECTO: Charging connector and discharging connector are separated, continuous discharging current is 15A.
• WIDELY APPLICATED USE: Our Li-Ion Li-Polymer battery pack protection board is for 13 series Li-ion batteries, it can be used for ternary batteries, manganese acid batteries and cobalt acid batteries.
• SIGNIFICANT NOTIFICATION: Charging is 5A, discharging is 15A, over-current is 45A, this protection board is suitable for electric bicycles with ?500W motor.

• Suitable For Led Light Or Other Electronic Product Which Use Dc 12V Power Supply.
• Input Parameters: 100-240Vac 50/60Hz.
• Output Voltage: 12V ( 5%).
• Kindly Refer The Product Description Before Buying The Product.
• Package Include:1 Piece Power Supply

• Input voltage: DC 12V 6V-22V.
  
• Output voltage: DC4.2V ?0.25V.
  
• Output current: 2A / Peak 3A.
  
• Conversion efficiency: about 95%. Shockproof Waterproof level: IP68.
  
• Protection function?Overcurrent protection?Overheat protection?Short circuit protection?Undervoltage protection.
  

• Input voltage: DC 12V 8V-22V
• Output voltage: DC 6V ?0.25V.
• Output current: 3A Max.This product has been upgraded, from the old version's maximum 2A current output to the new version's maximum 3A current.
• Conversion efficiency: about 95%. Shockproof Waterproof level: IP68.
• Protection function?Overcurrent protection?Overheat protection?Short circuit protection?Undervoltage protection.
• If the module works for a long time it is recommended that the current does not exceed 2A

• Input voltage: DC 12V 6V-22V.
  
• Output voltage: DC5V ?0.25V.
  
• Output current: 2A / Peak 3A.
  
• Conversion efficiency: about 95%. Waterproof level: IP68.Shockproof
  
• Protection function?Overcurrent protection?Overheat protection?Short circuit protection?Undervoltage protection.
  

• Universal Compatibility: Converts 2-pin flat US plugs to round 2-pin plugs for use in Europe, Asia, and other regions.
• Compact Design: Lightweight and travel-friendly, easily fits in your bag, purse, or pocket.
• Durable & Reliable: Made from premium, heat-resistant materials for long-lasting use and safety.
• Simple to Use: Plug-and-play operation; no additional tools or installation required.
• Versatile Usage: Perfect for travelers, expatriates, and anyone needing to connect US devices abroad.

• TP4057 1A Lithium Battery Charging Board with Protection
• Type-C USB C Li-ion Battery Charging Board
• Constant current/constant voltage charging with over-temperature protection
• Dual output of charging status, no battery and fault status display
• TP4057 1A 3.7V Lithium Battery Charging Board with Protection Type-C USB C Li-ion Battery Charging Board Over TP4056

• Input voltage range DC 3 -40 V (input voltage must be 1.5 V higher than the output voltage, no boost)
• Output voltage range?Output: DC 1.5 - 35 V voltage is continuously adjustable, maximum output current is 3 A
• 8 pieces of LM2596 board and heat sinks included
• Easy to make it work and convenient to accurately adjust the output voltage with a mini screwdriver.
• 100% SATISFICATION SERVICE: If there are any problem with our products, please feel free to contact us. you can request a refund for any single module and no need to return it.; Any problems you can contact us and we will try our best to resolve it till you satisfied.?Note?The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down)

• MCU users, if you accept a small load KEY can be connected to the microcontroller about 20s to provide a low level allows the module to continue working. Trigger mode: low level trigger (ground).
• 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection.
• The output opens automatically at the first time the load is connected.If the load is less than 50MA, automatically close the output after 30 seconds;If the load is greater than 50MA, the output opens automatically.
• High Power High Efficiency: Discharge efficiency up to 96%. In discharge mode (The charging mode KEY function is invalid), trigger the KEY port once to open the output; continuously trigger the KEY port twice to close the output.
• Can be applied to solar panel turning to mobile phone charging, car charging retrofit, driving recorder power supply, household power supply, intelligent plugging transformation, fast charging adapter, etc.