Electricals Store - Surface Wiring

• Suitable for 1-2 Wires: Cord hider wall kit interior size: 0.7 inches wide x 0.31 inches high, suitable for 1 thick extension cord or 1 standard power cord + 1 Cat5 wire, etc. Note: The cable height or diameter must be less than 0.31 inches (7.6 millimeters). Please measure your cable before ordering.
• 157 inch Cord Cover Kit for Wires on Wall: The wall cable covers hiding kit includes 10 pieces of 15.7 inch wire ducts with a total length of 157 inch. Comes with 3 couplings, 2 flat elbows, 1 T-connector, 1 inside elbow and 1 outside elbow. The cord hiders for TV on wall kit contains multiple pieces for utmost flexibility and is the most affordable solution for concealing wires.
• Quick Installation: The wire cover for wall uses a strong self-adhesive. Just confirm where you want the wiring to go, peel off the backing and press to stick on a dry & dust-free wall. Install the wires, and then snap or slide the wire covers over them it's so easy! You can also use the included connector to hide cables in corners; seamless links are also possible.
• Premium Material: Made of PVC material. No impurities and no chemical smell. Wall cord concealer are flame retardant, corrosion resistant and oxidation resistant. The plastic will not turn yellow easily, and the protection it provides can greatly extend the service life of the cord.
• TV Wire Hider Blends in with the Environment: Its surface is smooth and the color is clean and integrated; you can paint it any color you like, or cut it to the length you need. Improve your quality of life and increase the safety of your home environment!
• Warm Reminder: 157in wall cable management kit holds 1-2 cords. If you want to hide additional wires, there are more options in our YCLYC!
• Note: Tape cannot be used on textured walls. Once removed, the tape may damage painted walls. It is best to plan the route before installation, and it is best not to dismantle it after installation.

• Safety and reliability: JANDECCN wire splicing connector is made from insulated material, flame-retardant, corrosion resistance, aging resistance, high pressure resistance. Strong structure firmly locked to DIN guide, long service life.
• Product feature: JANDECCN multi-function DIN rail terminal blocks instead of the ordinary rail connector, reduce the wiring time by 50-70% with our new design. The wire connectors support a variety of installation methods (guide rail, screw mount and splicing). Make the connection easier faster and lower maintenance cost.
• Widely applicable: JANDECCN DIN rail terminal blocks can be used for home appliance, lighting, electrical control, power supply, sockets, switches, machinery and other wire connection parts. Every junction independent shrapnel, different wire managed separately, improving safety performance.
• Compatibility: Coil in (solid wire 20-10 AWG, flexible wire 28-14 AWG), Coil out (solid wire 28-12 AWG, flexible wire 28-14 AWG)
• Package content: 6 Pcs DIN Rail Terminal Blocks with 12 Pcs Removable Rail Clip in 1 box

• 4 Set Electrical Junction Box with Cover: with 4 electrical outlet boxes, each measuring 4x2 inches, and 4 pieces of 2 gang duplex receptacle covers collectively making your renovation or construction project a breeze, offering a good experience with our package that includes necessary components for a comprehensive electrical makeover
• Galvanized Steel Construction: crafted from galvanized steel, our electrical junction box and cover boast quality and strength; They are sturdy, resilient and provide the much needed sturdiness for your long time electrical needs; Plus, they are suitable for 2 hour fire rated wall, ensuring good efficiency and longevity
• Thoughtful Design for Safer and Organized Wiring System: our metal outlet box includes multiple knockouts, specifically 10 pieces of 1/2'' knockouts and 6 pieces of 3/4'' knockouts; This ingenious approach keeps your wiring system clutter free, secure, and well arranged
• Standard Size for Numerous Requirements: the standard 4x2 inches size of our metal junction box ideally complements a wide array of electrical requirements; The fitting accommodates ample space, making your electrical setup secure, organized, and accessible; Please check the size details before purchase
• Adaptable for Various Installations: ranging from home renovation projects, builds to commercial construction, our metal electrical box suits a broad spectrum of applications; The versatility embodied in their design makes them a fitting choice for different types of electrical system setups

• [High quality]: The Electrical Enclosure and bottom plate are made of high quality ABS plastic, and all metal fittings are replaced with stainless steel.
• [Appearance] As with the purchase of a leather bag, the metal logo adds a touch of class.
• You do not have to worry about the outdoor junction box will be damaged, because we will make the waterproof box higher density makes the outdoor junction box more robust, while ensuring that it has a stronger toughness.
• The outdoor electrical box has the characteristics of insulation.
• It is well sealed to protect your equipment from the harsh environment outside, making your equipment last longer. The porous design of the bottom plate makes it more convenient for you to install the equipment.
• [Applicable environment]: It can be used indoor and outdoor, effectively isolating rain, dust, oil, snow, etc.
• [Warning]: Please browse our pictures, which show all important dimensions of the product.There is no pre-drilled hole on the electrical box.
• [Features]: You do not have to worry about its service life, because it has the characteristics of sunlight and corrosion resistance.

• DIN Rail Mount Screw Terminal Block Breakout Board for ESP32-DevKitC. With the breakout board, you can easily extend ESP32-DevKitC projects to industrial control applications.
• High quality Taiwan DINKLE Fireproof nylon material DIN rail mount carrier, can support width 35mm / 32mm / 15mm rail, and the carrier can be taken apart for panel mount use. FR-4 fiber glass PCB, dual copper layers.
• PCB mount Terminal Block: pitch 5.0mm/0.197\", strip length 7mm, screws - M2.5, steel, Cr3+ Zn plated. pin header and cage - brass. Wire range 28AWG ~ 12AWG / 2.5mm square.
• Note: the item not include ESP32-DevKitC module. The breakour board supports ESPRESSIF official ESP32-DevKitC, but we do not guarantee whether to support third-party modules, you can check the ESPRESSIF official website for more information before buying.

• SpecificationsProduct name: Electrical Box; Waterproof rating : IP65; Qualification?CE?ROHS; Material: ABS, PC; Net Weight: 340g; Main Color: Gray,Transparent.
• Product SizeOuter Size of enclosure box (Approx.): 8.7\" x 6.7\" x 4.3\"(220 x 170 x 110 mm)(L*W*H); Inner Size of enclosure box(Approx.): 8.0\" x 6.0\" x 4.1\"/254 x 152 x 103 mm(L*W*H)- - (Allowable Error: ?2 mm).
• Industrial Electrical Box: electrical unit is not only weather resistant but also waterproof and does not allow dust to enter. You can drill holes inside depending upon your project requirement with no cracks and compromise
• Easy to operate: electrical unit is easy to install, Hinged enclosure makes the opening and closing easier; For the internal mounting, industrial enclosure features an mounting bosses,more convenient for your project.
• Comprehensive Industrial Enclosure: The junction box features two or three plastic latches for added security and locking.
• Package Contents: 1 x Clear junction box, 2 x N-P-T 1/2\" cable glands. (Cable connector for wire diameter range: 7-12mm)

• The D-Line Cable Raceway is a cable management solution used to conceal and protect surface cables. Using D-Line Raceway - improves the look with the half-round profile of the D-Line cord coverer, designed to discreetly conceal cords. The D-Line Raceway also protects surface cables by making cables less accessible for curious pets and babies.
• D-Line Small (0.8x0.35 inch) cable cover profile can hide cables up to 0.8 cm outer diameter. Popular one piece design with hinged cover for hiding speaker cables, phone cables and alarm cords allows easy cable access... great when devices are upgraded!
• The D-Line Cable Raceway is a great wall cord cover with D-Line's half-round wire cover blended with decors and may look like the natural upper part of skirting boards. Included 12 x cord closer accessories allow the user to hide cables around the most popular angles. Connectors and end caps fit securely below cable channel lengths, while D-Line channel pleats and shirts forgive inaccurate cuts or measurements. The one-piece design of the D-Line half-round cable duct prevents cutting the cover and base separately.
• All D-Line cord organizer solutions are designed easy to install; no pre-DIY or electrical knowledge is required to install D-Line cable closures. D-Line wire covers are made from high grade pvc; D-Line privacy screens can be easily cut (if required). Each D-Line cord cover length comes with a strong self-adhesive back; just twist and stick it to a flat clean surface, open the hinged lid and close it to hide pesky cables!
• Dyeable Cord Cover - The D-Line Raceway is available in a variety of colours and sizes to suit the environment, but D-Line cable covers can be fully painted for a perfect finish. To paint, simply switch the cable concealer with a fine sandpaper and apply two coats of paint!
• Each pack includes: 4 x D-Line White Cable Ducting 2.0cm (W) x 1.0cm (H) x 99cm Length (4.0m total coverage), 2x Straight Bend, 2x Inner Bend, 2x Outbend, 1x Equal Tee, 3x Connector, 2x End Caps.

• Perfect DIN Rail Terminal Blocks KitTerminal blocks kit comes with 20pcs terminal blocks, 2pcs ground blocks, 2pcs jumpers, 4pcs E/UK end brackets, 4pcs UK-2.5BG end covers, 1pcs 8\" aluminum RoHS Rail, 4pcs marker strip.
• Terminal Blocks UK2.5BThe UK2.5B universal screw DIN rail terminal block series has the typical features which are decisive for practical applications. Made from engineering flame retardants nylon PA66 with brass screw metal.It can connect two conductors with ease, even large conductor cross sections are not a problem. Can be used on DIN Rail 35mm, steel or aluminum.
• Ground Terminal Blocks ConnectorsThe grounding terminal blocks provide an easy-to-identify, convenient, neatly organized grounding bus that is mounted on the DIN rail.The protective terminal blocks has strong clamps to ensure tight fixation on DIN rails to achieve the PE function.
• 35MM Aluminum DIN Rail Mounting rails and brackets to enhance configuration and installation. Guide rails can be used to install circuit breakers, contactors, surge protectors, modular jacks, motor soft starters, PLC, relays, terminals and other electrical appliances.
• Terminal Insertion Bridge, End Stopper Bracket, End CoverThe insertion bridge can be insert at the top clamp space of UK terminal blocks, potential distribution can be contact quickly using those bridges. UK series End Stopper Clamps are fastened using screws or simply snapped onto the DIN rail. End Cover Usage: Connection by screw tighten

• Perfect DIN Rail Terminal Blocks KitTerminal blocks kit comes with 20pcs terminal blocks, 2pcs ground blocks, 2Pcs FBI-10-6 terminal fixed bridge, 4Pcs E/UK end brackets, 2Pcs D-UK3/10 end covers, 1Pcs 8\" aluminum RoHS rail.
• Terminal Blocks UK5NThe UK5N universal screw DIN rail terminal block series has the typical features which are decisive for practical applications. Made from engineering flame retardants nylon PA66 with brass screw metal.It can connect two conductors with ease, even large conductor cross sections are not a problem. Can be used on DIN Rail 35mm, steel or aluminum.
• Ground Terminal Blocks ConnectorsThe grounding terminal blocks provide an easy-to-identify, convenient, neatly organized grounding bus that is mounted on the DIN rail.The protective terminal blocks has strong clamps to ensure tight fixation on DIN rails to achieve the PE function.
• 35MM Aluminum DIN Rail Mounting rails and brackets to enhance configuration and installation. Guide rails can be used to install circuit breakers, contactors, surge protectors, modular jacks, motor soft starters, PLC, relays, terminals and other electrical appliances.
• Terminal Fixed Bridge, End Stopper Bracket, End CoverThe fixed bridge can be insert at the Top clamp space of UK terminal blocks, potential distribution can be contact quickly using those bridges. UK series End Stopper Clamps are fastened using screws or simply snapped onto the DIN rail. End Cover Usage: Connection by screw tighten

• Flexible Installation: Provide a practical solution for areas where adding a wall box may not be feasible, making the surface mount outlet box the first choice for home renovation and installation needs
• Widely Compatibility:The surface mount outlet boxes match common surface mount raceway systems, ensuring compatibility with a wide range of electrical equipment and wiring setups
• Hard and Safe: Made of tough, non-conductive PVC, the plastic electrical junction box is fire rated for 2 hours and UL tested and to meet national standards and requirements, ensuring durability and safety
• Versatile Use: The 1 gang outlet junction box can be used as an electrical junction box, box, GFCI box, or duplex receptacle outlet box, making it a versatile option for a variety of remodeling and renovation needs
• Ample Space: With a box depth of 1.38 inches, the surface mount electrical box PVC outlet box provides ample space for wiring and electrical components

• GREAT QUALITY - The junction box is made from high-grade ABS flame retardant material.waterproof and not easily be deformed.
• FEATURE - IP65 junction box has the function of waterproof, uv and anti-aging.
• PACKAGE INCLUDES - 1 piece waterproof IP65 junction boxes
• ADVANTAGE - Completely non-toxic, does not produce harmful substances,on the other hand,easy to installation and safe operation.
• APPLICATION - Universal long-lasting electrical project enclosure usage for indoor and outdoor, applicable to all kinds of control box, cabinet, distribution instrument box, electronic product shell, etc.

• IP67 Waterproof Rating- Waterproof & weather designed, effectively block splashing water, rain, dust, snow, oil, UV, etc., can be widely used for both indoor and outdoor applications.
• Industrial Electrical Box- Electrical unit is waterproof & dustproof and does not allow dust to enter. You can drill holes inside depending upon your project requirement with no cracks and compromise.so it's also suitable for your various DIY projects.
• Superior Sturdy- Made of high-quality ABS material which offers outstanding impact resistant and electrical insulation, can keep your equipment well-protected in harsh environments.
• Easy to Use- The project box is easy to operate and repair, no cable cutting, more convenient.Ideal for electronic projects, instrument enclosure, power supply units, temperature controller box, etc
• Junction Box Size- The outer size of the project box: 7.87\" x 5.91\" x 3.94\" (200 x 150 x 100 mm)(L*W*H); Inner size of the electrical box: 7.52''x5.59\"x3.7\" (191x142x94mm)(L*W*H); Thickness: 0.12in/3mm. Allowable error: ?1mm

• 2 Way Distribution Box -- Widely used in indoor and outdoor electrical, communication, industrial and fire-fighting equipment, etc. It can be directly installed on the wall without occupying space.
• IP66 Waterproof -- The distribution protection box has IP66 waterproof grade, which can effectively block rain, snow, oil, etc., providing safety protection for your circuit equipment.
• Openable Transparent Cover -- Transparent distribution box cover, you can easily check the internal status without opening the switch, and it is easy to use and maintain.
• Size -- Approx. 125 x 55 x 90 mm / 4.9 x 2.2 x 3.5 inches. Please double check that the product specifications meet your needs before purchasing.
• Material -- The waterproof distribution box is made of high-quality ABS and PC plastic, which is wear-resistant, corrosion-resistant and moisture-resistant.

• UPGRADE IP68 WATERPROOF: The outdoor junction box is constructed with a premium-quality PC casing, a silicone sealing ring, and a nylon elastic wiring port. Compared to the others version, the updated model boasts an improved IP68 waterproof rating, enabling it to be immersed in water within 10 meters for an extended period of time without damage. Additionally, the improved product is fireproof, dustproof, and impact resistant, making it suitable for use in both sunny and rainy conditions.
• ELECTRIC SAFETY: The connector is constructed with PA66 material, which has excellent resistance to high and low temperatures, as well, with a recommended working temperature range of -40?C to 105?C.
• REPLACEABLE RUBBER RING: The waterproof electrical cable connectors have two different sizes of rubber rings available to satisfy your varying wire wrapping needs: 5-9 mm and 9-12 mm.
• WIDELY APPLICABLE: The junction box connectors are designed to connect displays for gardens and outdoor billboards, tunnel lights, road landscape lights, underwater lights, street lights, etc., making them the perfect DIY tool for safe cable connections. Additionally, they can be used to repair and extend power cables with ease and convenience.
• BUY WITH CONFIDENCE: Should you have any dissatisfaction, please do not hesitate to reach out to us and we will do our best to assist you within 24 hours. Our focus is on delivering top-notch products and services that prioritize customer satisfaction.

• No Need to Drilling HolesUnlike other screw installations, our under desk cable organizer requires no drilling and attaches to the desk with 2 clips without damaging your desktop. You can also secure excess cables with zip ties and thread them through the holes in the side.
• Fits Desks 0.4\"-2\" ThickCable management tray fits flat edged desk thickness of 0.4\" to 2\" and comes with anti-scratch pad ensures your desk is not damaged during installation.
• Inward or Outward InstallationLitwaro two ways to install keep things within reach while clearing space on the top of the table. The holes on the side of the cable tray are great for cable management, and you can install it under your existing monitor arm mounting clips, making it easier for you to collect and organize wires.
• Sturdy and DurableWire organizers are made of sturdy metal, and the durable design won't deform or bend due to heavy cable weight, each tray can hold up to 15 lbs.
• Save Storage SpaceNo more tripping over or vacuuming up cords, this is the best answer you need to deal with the clutter of wires on your desk. Cord management under desk easily organize your wires and cables, keep them completely off the floor by hiding them underfoot, and keep your desk and floors organized and clean.

• Perfect SizeProject box Internally available Size is 7.87 inches (L) x 5.9 inches (W) x 3.94 inches (Deep) / 200x 150 x 100mm;Total Size: 8.66 inches (L) x 6.69 inches(W) x 4.33 inches (H)/220 x 170 x 110mm
• Durable MaterialsElectrical Box Made of ABS and Rubber, Sturdy and terrific,sealed, moisture proof, sunscreen, anti-corrosion, durable for years.
• Unique DesignEasily install and disassemble, use very convenient, Easy to operate and repair, no cable cutting, more convenient and safer.
• Widely ApplicationWaterproof Box Perfect for use outdoors, Waterproof junction box means these are well protected from rain and water splash back, making them perfect for joining wires inside.
• Easy To UseEnclosure Case Easy to drill and shape openings for making those DIY projects, Ideal for electronic projects, instrument enclosure, power supply units, temperature controller box, etc.