Electricals Store - Switches & Dimmers

• Controls three RTS devices/groups up to 65 feet away
• Customizable with stick-on button labels
• Installs with included mounting bracket
• No electrical box or wiring required
• Color: White

• Automatic submersible sump pumps
• 1-1/2'' FNPT discharge
• Piggyback float switch
• Clog-resistant design (1/2\" semi-solids handling)
• Psc motor,010' cord, not suitable for pond use

• Available in single or dual wall plate, flush mount or surface mount options, with or without weatherproof cover or box
• Compatible with Infratech Dual Element Heaters, CD-Series & WD-Series
• Range 120/277 VAC (20 amps max per switch)
• All components proudly made in the USA and supported by Infratech's exclusive Three Year Warranty
• Expert configuration and installation required, please consult a licensed electrician

• Vortex style impeller permits clog-free passage of solids
• Polypropylene and powder coasted aluminum construction
• Stainless steel rotor shaft
• Stainless steel fasteners
• Oil-filled, hermetically sealed motors with thermal overload protection

• Indoors-Only Heavy Duty Pump: WAYNE 1/2 HP CDT50 Pump is an indoor area workhorse with rugged and durable design; durable epoxy-coated and rugged cast iron construction with premium John Crane carbon/ceramic shaft seals for quality that lasts
• Customizable Operation: Piggy-back tether float switch for automatic or manual operation: 13\" ON level and 7\" OFF level; unique top suction design reduces clogging and prevents air lock condition, so no need for weep holes
• Reliability Defined: Cast iron seal plate prevents leaks and galvanic corrosion; engineered with upper and lower ball bearings in a sealed oil bath for virtually silent operation; abrasion-resistant glass-reinforced polycarbonate impeller for reliability
• Additional Features: 1.5 NPT discharge for compliance with building codes; 8 ft water-resistant power cord provides easy access to nearby GFCI protected outlet; for easy installation, use in 14 diameter or larger sump basins; UL agency approved
• Quality You Deserve: Proudly assembled in the USA for quality you can trust; warrantied for 2 years for dependable, efficient, & ultra-quiet performance
• Assembled in the US with foreign and domestic parts.
• Top suction pump design eliminates air locks and clogging from debris in bottom of sump pit
• Epoxy-coated steel motor housing and rugged, cast iron pump base
• Fully submersible
• 1/2 hp; max. Flow rate is 4200 gallons per hour; 3150 gph at 10 ft. Of discharge lift
• 1-1/2\" npt discharge

• Heavy duty interchangeable core key switch lock as an alternative of Best Access System 1W7K4
• Ready to accept small format IC (core not included)
• Brushed chrome front finish, brass construction
• Spring loaded, on-off-on function
• Work as double pole, double throw

• 100-Hour Super capacitor Eliminates The Need For Batteries
• Up To 96 Set Points Or Events
• Up To 50 Holiday Blocks With Schedule Capabilities
• Additional mode of operation turns the on/off buttons into 2-hour override

• Grounded Single Pole Switch

• Mounting Hole Size: 19mm Mounting Hole.Plaese check the size carfully befor you order it.
• LED Light Push Button Switch - 5 Colors, Red blue green orange white to choose.Durable for longer life time can up to 500,000 cycles.
• Self-Locking Function-With ON and OFF LED Light Push Button Switch.Push it to ON mode; Push it again to OFF mode. Easy to operate and use.
• Wide Application - The Latching Push Button Switch can be used for cars, motocyclr, boat, computer,access control systerm and other more
• Easy to install - Latching Push Button Switch with Wire Socket Round latching switch with screw clamp type terminals to make fitting very easy.

• Our Emergency Stop Push Button Switch through UL certification and CE certification.
• The HEAD Size Of k16-811-N-G6 is 40mm, The HEAD Size Of and the outer diameter of k16-811-N-G3Z is 52mm.
• 16mm Latching Push Button Switch, Push to lock, Turn to Release,contact Configuration:1NO 1NC SPDT.
• Emergency Stop Switch have connection Plug and Accessories. Brand Voltage :250V AC Rated Current:5A ,Hole Size:5/8 \" /16mm.
• Electrical Life:200,000 Times,Mechanical Life:50,000 Times.

• Our Emergency Stop Push Button Switch through UL certification and CE certification.
• The HEAD Size Of K16-811-G1 Is 30.8mm, The HEAD Size Of K16-811-16T is 52mm.
• 16mm Latching Push Button Switch, Push to lock, Turn to Release,contact Configuration:1NO 1NC SPDT.
• Emergency Stop Switch have connection Plug and Accessories. Brand Voltage :250V AC Rated Current:5A ,Hole Size:5/8\" /16mm.
• Electrical Life:200,000 Times,Mechanical Life:50,000 Times.

• Industrial Push Button Switches KEDU HY7 125V / 250VAC Key Lock Push Button Switches 4 Pin Electrical Safety Switch
• Current/voltage: 20/12A, 125/250V, 5E4, rated current: 16 (10) A
• With the function of the lock
• Single throw bipolar function for industrial use
• T?V certificate, safe and durable