Electricals Store - Switches & Dimmers

• 1/3 HP Sump pump moves up to 2,400 gallons per hour; pump will lift water up to 25' of vertical height
• Tough thermoplastic construction; 10-foot cord length
• Tethered float switch to automatically turn the pump on/off. Pumps Down To 1/2 inch From Surface When Used As Utility
• 1-1/4 inch or 1-1/2 inch NPT discharge for high capacity pumping
• Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested

• DP CONTACTOR

• Fits Most Badland Models including the Following models: 68142, 61384, 61605, 60813, 68144, 63769.
• Switch for 5,000 Lb, 9,000 Lb and 12,000 Lb Electric Winch.
• As Picture Shows This Has a Five (5) Pin Connection \"C\" shape. 5 Prong
• 12 foot cord

• Multipurpose push button switch covers a wide range of applications both indoors and outdoors
• Turn-to-Reset button
• Raised EMERGENCY POWER OFF label
• Illumination can be used as a status light, indicating activation, and allows the button to be easily located in a dark corridor
• LED illuminates green, red or white
• Unique, curved design helps protect against accidental activation
• Station housing molded of tough polycarbonate
• Two (2) Form ?C contacts, 10A @ 125/250 VAC, HP, 6A @ 30 VDC
• UL/cUL Listed, ADA Compliant

• OEM replacement part
• Package Dimensions: 14.6 H x 3.2 L x 5.6 W (centimetres)
• Package Weight: 0.014 kilograms
• Country of Origin : United States

• Part Number: 701/80144 701/53700
• Application Models: Compatible with JCB Backhoe 4C444 4CN444 SUPER 4CX444 4C 3CXE 214-4 215S 217-4 214e-LE 217S
• Direct Replacement;OEM Quality;Easy Installation
• Warranty: Returnable for 6 Months and Changeable for 1 Year(return and change for free)
• All joysticks are fully tested in factory to ensure the better long and durable service life.

• Low voltage pushbutton switches for control of multiple loads
• IR transciever for wireless configuration and remote control
• Plug n' Go automatic configuration and remote control
• Digital, 3-button
• White

• Hawkeye 904 microprocessor-based current status switches provide a unique solution for accurately monitoring status of motors controlled by variable frequency drives
• The H904 stores the sensed amperage values for normal operation at various frequency ranges in non-volatile memory
• This information allows the device to distinguish between a reduced amp draw due to normal changes in the frequency and an abnormal amp drop due to belt loss or other mechanical failures
• APPLICATIONS Monitoring positive status on motors controlled by variable frequency drivesReplacing pressure switchesMicroprocessor-based real labor saver No need to calibrate to detect belt loss on VFDsSelf-adjusting trip point factory programmed to detect belt loss undercurrent conditions
• Install and go Available with a relay;status and control in one package, saving time and space Bracket can be installed in three different configurations;added flexibilityAccurately detects belt loss and coupling shear on VFD driven motorsMonitors both frequency and amperage;distinguishes normal drops in amperage due to frequency changes from abnormal drops due to mechanical failureSplit-core design is ideal for retrofits; no need to remove conductor5-year limited warranty

• With Emergerncy Stop, LED Indicator
• For CNC machine origin correction and signal split
• Full plastic shell, high dielectric strength
• The shaft change-over switch, the IOPP sealed design
• * 1 * 10 and * 100 third gear ratio, 6-axis and magnification switch.

• Modular, plug-in system (head and body components)
• Positive opening NC contacts for safety applications
• Wide variety of economical plastic and rugged metal versions available
• Operating heads can be rotated 90 degrees to suit specific direction of operation
• Unique electronic safety position switches (LSE models) provide analog (0-10 Vdc or 4-20 mA) outputs proportional to the actuator position and allow for easy configuration of a custom trip point

• ENHANCED CONTROL FOR MACHINES: The Harmony XB4 Emergency Stop Head features a latched turn to release mechanism, providing an ergonomic interface for controlling machines; It has a wide modular range to suit machines and operator safety
• QUICK AND EASY ASSEMBLY: Easily install this emergency stop push button into standard cut-outs with simple screw-clamp connections; Designed to fit in a 22mm cut-out or Harmony XAPK control station ensuring compatibility with pre-existing machinery
• HIGH VISIBILITY: The Harmony XB4 Emergency Stop Head is clearly distinguishable visually at a distance with its clear color and prominent 30mm mushroom shape.
• RUGGED AND DURABLE: With its metal bezel, it is ideal for applications requiring high impact and vibration resistance, ensuring durability in harsh environments; Its wide range of operating temperatures from -40?C to 70?C allows versatility
• CERTIFICATIONS: This emergency stop head is certified by LROS (Lloyds Register of Shipping), GL, CSA, BV, DNV, and UL, ensuring compliance with industry standards; Covered by an 18-month warranty

• Blue Sea 9009 Switch, Ac 120Vac 32A Off +2 Position
• Package Height Of The Item Is 7.0\"
• Package Length Of The Item Is 4.0\"
• Package Width Of The Item Is 5.0\"

• ATTENTION: Please verify that this 6 Rocker Switches Panel Pod fits your vehicle before you purchase,Fitment: Jeep Wrangler JK 2007-2018 without any trimming or cutting of any kind.
• 6 Rocker Switches Panel Pod for Control,Voltage indicator real-time monitor your vehicle's voltage,Can be assembled on the car's electrical accessories (LED lights, air pumps, audio, compressors, etc.) from the original wiring harness separate battery power supply.
• To avoid excessive chaos in the vehicle wiring harness, and to increase the safety performance of the circuit modification process. And save time for troubleshooting electrical faults in the future,Compatible with all automobiles and devices equipped with a 12 Volt DC power source.
• Made of rugged aluminum with a long lasting black texture powder coating paint,80A Power Relay & 15A Blade Fuse & Maximum output: 960w,Great for running off-road lights, rock lights, back-ups,air compressor and much more!
• Come with instruction,Easy Installation: plug and play,Never Tangle No frustrating wiring Installation takes only 20 Minutes,Come with 12 Switch Covers You can use removal tool attached to replace the switch covers by yourself,Customize Personal 6 Rocker Switches Panel Pod.

• Made from quality materials
• Durable and long lasting
• Time-tested design