Switches & Dimmers By DAIERTEK

• DaierTek 16mm (ON)-OFF Push Button Switch; Black with Blue LED Lights; Switch rating: 5A 12V DC, Hole size required: 5/8''/16mm, Switch Head Diameter: 18.9mm.
• 16mm Momentary switch: Push it, ON; Finger loose, OFF. If you want to use it in an AC environment, please connect a 120K resistor in series to the LED pin.
• Momentary Push Button Switch with Blue LED Lights. Operating Life 500,000 Cycles.
• High quality metal material & IP65 waterproof protection can be used in wet or dusty enviroment.
• Metal Push Button Switch can be applied to car motorcycle modificine ,electric equipment ,appliance,machine ,home Lamps and so on.

• 1.Type: 12v On/off Illuminated toggle switch. The required mounting hole diameter of this lighted toggle switch is 16mm.
• 2.Performance: This lighted toggle switch contains a 12-24V RGB (Red, Green, Blue) triple LED. Comparing with the previous LED toggle switch, this upgraded version enables a higher level of customized light styles. For example, you can choose one of colors such as red to light up when switches off; and when switch on, the red color can switch to another color such as blue.
• 3.Switch Rating: 20A 12VDC. Packed with 3 sets of Wires and Cable Ties. The length of the wires(including cable ties) with the illuminated toggle switch is about 15.8cm(6.22 inches).
• 4.Waterproof: Due to refer to the design of push button light switch, this LED waterproof toggle switch is IP67 waterproof without rubber boots. Please note: the switch housing and terminals behind of the panel are not waterproof.
• 5.Application: This 12 volt toggle switch can be used both indoors and outdoors, such as marine boat, car, truck, other automotives, etc.

• Latching Push Button Switch, SPDT 5 PIN ON OFF Maintained, Push it, ON(Keep ON after you release your finger / Self-Locking); Push it again, OFF; 50 ICON Push Button Switch Labels for DIY use.
• 12V Push Button Switch with DC 12 Volt Blue LED illuminated. If you use it in an 120V environment, please connect a 120K resistor in series to the LED pin.
• Waterproof Push Button Switch IP65 degree sealed, can be used in wet or dusty enviroment. Aluminum Anodized Black Metal Push Button Switch
• LED Push Button Switch, 5A 12VDC rating, with wiring harness. 16mm Pre Wired Pushbutton Switch require 5/8 Inch Panel Mounting Hole.
• This ON OFF 12V Push Switch Button can be applied to Boat, Marine, RV, Vehicle, Truck, Car, Auto, Motorcycle, Industrial Equipment, Home Lamps, etc.