Industrial & Scientific Store - Additive Manufacturing Products

• +/- 0.03MM TOLERANCE: Our TPU 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.03 mm. No matter which 3D printer you are using, the consistently round diameters provide optimum flow through the extruder nozzle. Almost all 1.75 mm-specification 3d printers in the market are configured to run with the TPU 3D printing filaments. Shore hardness 95A.
• 1.75MM TPU FILAMENT: The TPU filaments are useful in a range of printing applications primarily which require flexibility. TPU filaments have the advantage of Flexibility & Low-Warpage.
• VACUUMED SEALED PACKAGING: Some 3D printing materials can be negatively affected by moisture, so this is why Our 3D printer filaments are all vacuumed sealed along with a desiccant pack. This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
• EASE OF PRINTING: TPU filaments work best with direct drive machines. They do also print with Bowden type 3D printers but this can require some work to find the perfect settings for your machine. TPU filaments are primarily used for applications where the 3D Printed parts require flexibility. These filaments have a shorehardness of 95A.
• PRINT PARAMETERS: Recommended Nozzle Temperature is between 210 - 220 and Bed Temperature is 50. Print speed - 20mm/s

• Truly flexible (no fill or layer manipulation required to achieve performance)
• Item Package Dimension: 8.0\" L x 9.0\" W x 2.5\" H
• Item Package Weight: 1.25 lb
• Model Number: 3DNF06117505

• Leak-Proof Nozzle: Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.
• Cold Nozzle Change: Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.
• High-Flow Characteristics: Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.
• All-Metal Design: Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged.
• Made in USA by Microswiss

• Braskem FL900PP-CF filament is a specially engineered carbon fiber reinforced polypropylene filament, that offers superior mechanical and thermal properties compared to traditional neat PP filaments.
• Minimal shrinkage and warpage and allows users to print lightweight and exceptionally rigid parts for high-end application, such as automotive, aerospace, nautical and sporting goods
• Made from 100% recycled Carbon Fiber
• Naturally chemical and water resistance.
• No drying required and easy to print
• Up to 30% lighter than traditional PLA
• 1.75 mm diameter

• More than 90 percent of the parts are processed by CNC machine, which can be better to improve the compatibility with the machine and is not easy to bend.The machine installed with this upgrade package has been tested for a long time, and it has been greatly improved in terms of stability and printing accuracy, and can carry out printing work for a long time.This is the best upgrade package you can find for your Ender 3 pro
• This upgrade CNC machined plates provides a reserved interface for upgrading Double Z, you can upgrade by yourself by sourcing other neccessory parts for upgrading Double Z to your printer
• We Update the BLV ender 3 pro kit to be CNC Machined parts with better design to improve the 3D printer stability and accuracy.
• This kit is only compatible with Ender 3 pro 3D Printer GATES Belts are provided with this pack. And This kit is not including linear rails, you need to source 4pcs 300mm Length MGN12H Rails with block by yourself .

• 2.5kg in Total, 0.25kg per Spool, Pack of 10 Spools PETG 3D printer filament bundle multicolor, 10 colors in total: Black+White+Grey+Blue+Red+Transparent+Cyan+Pink+Coffee+Purple.

• Packing list: 1 x SPLF60 planetary reducer 4 x screws
• Rated output torque: 28 Nm
• Adapter motor: Nema24 stepper motor
• Input speed: 3000 rpm to 6000 rpm
• Protection class: IP54
• Operating temperature: -10?C to +90?C
• Full load efficiency: 96%

• 32-bit DSP technology Optically isolated differential input signals. Ultra-low noise and vibration.2-256 Microstep setting range. It can drive 4/6/8 two-phase stepper line.
• 2DM860 motor controller is a digital stepper motor controller, which adopts the latest 32-bit DSP control technology.
• Users can set a microstep within 25600 and a multi-range current value within the rated current.
• Built-in microstep technology greatly improves stability and reduces noise under low microstep.
• Integrating the automatic parameter adjustment function, the driver could adjust the optimal operating parameters automatically for different motors to maximize engine performance.

• Constant Temperature - 3D Printer Tent Keep a constant temperature printing environment, reducing the bad impact on printed models when low-temperature weather, helps filaments with bed adhesion at high temperatures, improving printing stability.
• Wide Compatibility - Compatible with Creality Ender 3 S1 Plus/Ender 3 Max/Ender 3 Max Neo/Ender 5 S1/Ender 5 Pro/Ender 5 Plus/CR-10 V3/CR 10S Pro V2/CR-10S 3D Printer. Inner Size: 26.1*28.1*33.9 inch.
• Safe to Use - The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure and will not spread as well. Equipped with a selection of iron pipes, stable structure, and abundant space can help you to achieve maximum peace of mind printing.
• Quick and Easy Installation - Folding storage, easy to carry. Multi-faceted observation, reserved tool pockets. Economical 3D printing room. There are zippers on the front and top of the Tent, providing you with the greatest convenience.
• Extensive functionality - Dustproof and good noise reduction. Our 3D printer tent can reduce noise to a certain extent when printing, It can be used as a storage tool to provide a dust-proof and clean environment for printers, filaments, and accessories.

• [Suit for] Upgraded V2.2 silent motherboard for Ender 5 Plus 3D printer. Just plug it in and you could start printing.
• [Silent] Super quiet and noise reduction. Adopting TMC2208 stepper motor drivers is essential to eliminate motors sound when printing.
• [Safety] Thermal runaway protection is enabled, if the temperature rises out of control, the printer will stop heating and halt automatically.
• [Bootloader Pre-installed] The firmware can be modified by ARDUINO or Cura with the USB cable.
• [Addition]Adopt special power chip, support 24V input voltage.Works with E / Z / Y / X transaxle.Notice: This new upgraded silent main board does not currently come pre-installed on Ender 5 PLUS. Any issue please kindly contact us(seller)via amazon directly, we provide support within 24H.

• Genuine E3D Parts
• Our market-leading Hot End: all-metal design, British engineering, high-temperature performance.
• Print All The Things Easily print any filament on the market with less stringing and clogging.
• Customisable Switch up your HotEnd with the full E3D ecosystem of blocks, nozzles, and more!
• High Temperature Performance All-metal design for reliable high-temperature printing.

• PEI Powder Coating: PEI steel plate adopts PEI powder coating, the hardened steel spring plate is not easy to deform and can be used for a long time.
• Double Sided Texture: Double sided texture is the same, can be used on both sides, high temperature resistance.
• Auto Leveling: No need for solidity glue or different consumables to replace the hotbed, enhanced auto leveling sensor sensing.
• Simple Operation: Easy to remove by bending and popping, easy to maintain, easy to take the mold, repeated use, easy to operate.
• Uses: The printer nozzle can print models directly on double layer textured PEI powder steel plate.

• Truly flexible (no fill or layer manipulation required to achieve performance)
• Item Package Dimension: 8.0\" L x 9.0\" W x 2.5\" H
• Item Package Weight: 1.25 lb
• Model Number: 3DNF03117505

• 32 Bit Microprocessor : Adopted ARM Cortex-M3 series STM32F207VCT6 master controller chip with 32-bit CPU main frequency of 120 MHz, BTT TFT35 V3.0.1 touch screen can perfectly replace the LCD12864 screen for use.
• Dual Working Modes : BTT TFT35 V3.0.1 display enables two different modes, with options for either LCD12864 Encoder Mode, or the modern Colour Touch Screen Style. It also supports both SD card and USB stick printing.
• More Reserved Extensions :TFT35 V3.0.1 touch screen reserves the extension ports of filament break detection, automatic shutdown after printing, also WIFI function can be realized by external WIFI module through WIFI port.
• Easy Firmware Updates : It is easy and convenient to update firmware by SD card, simply downloading from Github, coping and saving it to SD card. firmware must be reserved, then re-plug the SD card and wait to 10s. That's all takes to finish updating on firmware.
• 100% Technical Supports : If you have any problems about BTT TFT35 V3.0.1 touchscreen, please feel free to contact us on Amazon. Our technical supports team will respon to you within 24 hours. 1-Year Warranty is 100% guaranteed!

• This is Plated Wear Resistant Nozzles for LulzBot TAZ 5, TAZ
• 6, LulzBot Mini, Hexagon Hotend M6 thread, 3mm Filament. It is made from a 360 brass base material and plated with Twin
• is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of fricti