Additive Manufacturing Products By 3DINNOVATIONS

• Optical Endstop
• Size:32mm x10mm /1.26\"x0.39\"(inch) (approx)
• Optical limiting optical switch 3D printer switch transmission
• And supporting the use of RAMPS 1.4 plate
• Normally, 3 optical switches are needed for the system; durable with more than 100,000 times cycling life.

• (1) Dual power supply. Operate at 12V or 24V. You can use thinner wires when operating at 24V.
• (2) A central mounting hole on the front side to allow for three point mounting. This is much easier for bed leveling in comparison to 4 point mounting. First level the side with two holes and fix in place, then level the side with one hole.
• (3) Large solder pads for multiple wires (ribbon cable) or a SMD pinhead connector can be mounted.
• (4) With 15V on the 12V terminals will maintain approx. 115 degree Celsius without regulation.
• (5) Running 24V on the 12V terminals will heat up the heatbed to 100 degree in only 2 minutes

• 0.2, 0.3, 0.4, 0.5, & 0.8 mm Extruder nozzle set
• Size : 13 x 7
• Thread : M6
• Material : Brass
• Applied materials : PLA or ABS 1.75 mm.

• Type: Flexible Shaft Coupling (In 3d printer connect Stepper motor shaft to lead screw)
• Material : Aluminium
• Size : 6.35mm x 8mm (d1 x d2)
• Outside Diameter : 19mm (D)
• Length : 25mm (L)

• 3 Pcs: mechanical end switch
• 3 Pcs: cable 3-pin 70 cm
• Red wire connects to vcc (ramps of +)

• Flexibility of this coupler removes stress between motor and driving component.
• Compatible with NEMA 17 stepper motors (for 5mm to 8mm shaft diameter).
• Useful in RepRap 3D Printers and small CNC machines.
• Quantity: 2pcs
• Size : 5mm x 8mm (d1 x d2); Outside Diameter : 19mm (D); Length : 25mm (L)

• Type: Cable for 42 stepper motor
• Terminal: Black 2.54 mm Dupont Connector of 4pin & White PH2.0 of 6pin (XH2.54 4P-PH2.0 6P.)
• Length:1 Meter
• 3D Printer Stepper Motor Parts to connect Ramp 1.4 or Other devices.
• Quantity: 2 pcs.

• This item is a 2020 aluminum profile flat seal manufactured with premium material for durable and long-lasting use. Its easy to use and install with long service life.
• The precise design will ensure its practicability in the work of highly performance
• 6mm M6 Aluminum Profile Slot Cover 2020 Aluminum Fittings Seal Accessories for 3D Printer
• 3D Printer DIY Parts 303 Aluminum Profile Slot Cover

• Model: SHF8 ;Bore:8mm
• Material: Aluminum; Surface Finish: Anodised; Color: Silver
• Shaft Support suitable for 8mm Diameter Shaft used in CNC, 3D Printing applications
• Product Size:42 x 24 x 10mm; Inside Diameter:8mm/0.31\"(Applicable to the optical axis diameter 8mm)
• Clamping bolt:M4; Recommended Mounting bolt:M5(not included here)

• Model Number : PC4-M6
• Thread Size : M6
• Material : brass & plastic
• Quantity: 2 pc
• Use: Bowden extruder in Creality and other 3D Printer Extruder

• 3D Printer accessories 10mm width timing synchronous belt for 3D printer.Excellent process with great quality, great accessory for 3D printer
• Durable Materials Made of rubber material, very flexible, durable and practical.
• High-efficiency Low elongation, low noise, high wear resistance and good crack resistance.
• Application Multi-purpose, also suitable for conveyor, mining equipment, automobile, food machinery, dishwasher and so on.

• Type:158-2GT-6; 2GT Pitch :2mm
• Belt Height:1.52mm; Tooth Height:0.76mm
• Material: Neoprene Rubber With Fiberglass Core
• Pitch Length:158mm; Width:6mm
• Teeth Number:79 ; Shape:Closed

• Material: Stainless Steel
• High quality and durable performance
• Easy and convenient to use
• This leveling screw spring kit is great for 3D printer
• Each kit consists of 1 piece M3*40mm screw, 1 piece leveling knob and 1 piece leveling spring

• Needle diameter: 0.35mm; The bit length:7.5cm; The length of shank: 3cm; Total length: 10.5cm. Material: Stainless Steel.
• Good material: made of stainless steel, flexible and won't break easily; Comes with a handle, so you can easily twist it in during use
• Good performance: the drill bits will clear your printer nozzles very well and make it print better. Compatible with most of 3D printers on the market such as Duplicator, MakerBot, RepRap etc.
• Durable to use: can use heaps of times as it is made of stainless steel with good flexibility, will neither rust nor broken easily
• Package Included: 10 x 0.35mm Needle

• Package included: comes with 4 pieces glass bed spring turn clips, which are upgraded and more stable spring turn, also easy to install, remove and hold the glass firmly
• Durable materials: these printer platform clamps are made from stainless steel, which are anti-rust and durable, which can be applied for 7 mm thickness bed platform (normally 3 mm thickness aluminum bed and 4 mm glass bed), saving more space and using securely
• Wide applications: bed glass platform clip can be compatible with Creality Ender 3 pro, Ender 3 V2, Ender 3S, Ender 5 Pro CR-20 PRO 3D printers and other 3D printers, and also is suitable for photography, picture frame
• How to install: place the glass turn clips from beneath, then press down the 2 spring pieces with your fingers, and slide the clip completely onto the heated bed and glass bed while making sure that the top piece of printer platform stable clips does not touch the glass until it is completely fixed in place
• Measurements: 3D printer platform clamps are at most 1.53 x 0.5 inches/ 3.89 x 1.28 cm (L x W) with a 0.43 inch/ 1.1 cm holding thickness, which are convenient to hold by hand; Please measure your build surface prior to purchase as these clips will only open to 11 mm at most; Example a standard Ender 3 with a glass bed will measure 8 mm thickness

• Package include: totally 20 pcs MK8 nozzles in 6 sizes, 2 x 0.2mm, 2 x 0.3mm, 10 x 0.4mm, 2 x 0.5mm, 2 x 0.6mm, 2 x 0.8mm.
• Parameter: input diameter 1.75mm; output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm; out thread: M6
• Applicability and compatibility: fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer
• Premium material: the 3D printer nozzles are made of high quality brass material, sturdy and durable, connect with M6 out thread, easy to install
• Easy to Install: The extrusion holes are centered and centric, the bore is smooth, and the threads are clean, connect with M6 out the thread