Additive Manufacturing Products By Comgrow

• Double performance in single machine

• Smart UI, Self-test with One Tap Responsive touch UI with an intuitive tab bar, smart self-test for Z offset, auto leveling, and more with just one tap, Real-time model preview, and vivid motion graphics of printing parameters.
• X-axis Linear Rail, Ultra-smooth Motion The precise linear rail on the X-axis has a carriage slide containing ball bearings, together with the dual Linear Shafts on Y-axis and dual X-axis Lead Screws, making each move accurate, steady and frictionless ( 0.04 friction coefficient), built out of stiff steel, it will stay as new even after long-time use.
• 500mm/s Max Printing Speed Creality Ender-3 V3 KE supports a maximum printing speed of 500mm/s, 8000mm/s acceleration, which can print faster while keeping the print quality, saving 86% of the time compared with other printers.
• More Filaments to Print With The Ender3 V3 KE can handle Hyper PLA, PETG, ABS, TPU (95A), and ASA filaments. Whether you need to print daily items, parts, or products, simply choose the right filament. Achieve faster and better printing with Creality Hyper PLA.
• 4010 Model Cooling Fans on Two Sides Ender-3 V3 KE features the 4010 model cooling fan on each side of the printhead, which cools the freshly printed section rapidly and evenly, keeping your printers always in good shape.

• High Precision These tough PLA wires have strict tolerances. Diameter 1.75 mm, dimensional accuracy +/- 0.02 mm without exaggeration.
• Tangle free and without stop: Consistent diameter and roundness, less string formation and deformation, strong adhesion between the layers.
• Environmentally friendly: Made from starch raw materials from renewable plant resources.
• Wide compatibility: Works and harmonizes perfectly with all common 1.75mm FDM 3D printers thanks to the high quality standards of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm.
• Vacuum Pack 329mm 3D printer filament PLA in vacuum packaging; 1kg coil x 2.

• High-quality PLA filament: The recommended nozzle temperature is about 210-220 degree C. With quality and consistency in mind, stronger toughness with low shrinkage and better layer adhesion. Meet your needs for functional print projects. (Using tips: Please pass one end of the filament into the fixing hole to avoid being entangled after finishing your printing.)
• Dimensional Accuracy & Consistency: PLA filament. Self-adaptive control system in the manufacturing guarantee the 1.75 mm diameter, dimensional tolerance: +/- 0.02mm, 1 kg spool (2.2lbs) net weight.
• Clog-Free & No Bubble: PLA is vacuum sealed with desiccant to protect the filament from moisture to achieve high-precision printing.No clogging and bubble-free.
• Less-tangle and Easy to Use: Auto-mechanical winding to make sure the wire is neatly arranged.Recommended PLA filament extrusion/nozzle Temperature 210 degree C - 220 degree C.
• Wide Compatibility: Works and Compatibleperfectly with all common 1.75mm FDM 3D printers.

• High-quality PLA filament: The recommended nozzle temperature is about 210-220 degree C. With quality and consistency in mind, stronger toughness with low shrinkage and better layer adhesion. Meet your needs for functional print projects. (Using tips: Please pass one end of the filament into the fixing hole to avoid being entangled after finishing your printing.)
• Dimensional Accuracy & Consistency: PLA filament. Self-adaptive control system in the manufacturing guarantee the 1.75 mm diameter, dimensional tolerance: +/- 0.02mm, 1 kg spool (2.2lbs) net weight.
• Clog-Free & No Bubble: PLA is vacuum sealed with desiccant to protect the filament from moisture to achieve high-precision printing.No clogging and bubble-free.
• Less-tangle and Easy to Use: Auto-mechanical winding to make sure the wire is neatly arranged. Recommended PLA filament extrusion/nozzle Temperature 210 degree C - 220 degree C
• Wide Compatibility: Works and Compatibleperfectly with all common 1.75mm FDM 3D printers.

• UPGRADED ENDER 3
• SAFETY PROTECTED POWER SUPPLY
• ADVANCE TECHNOLOGY

• Very easy to take off the models; No tools needed when removing models.
• Use clips to fix the glass plate on the hot bed.
• Higher temperature higher sticky. The models will stick on bed firmly when temperature is high.
• Fit for Ender 3 / Ender 3X / Ender 3 Pro / Ender 5 / CR-20 Pro 3D printer.
• Life-time professional technical supports.

• Smart UI, Self-test with One Tap Responsive touch UI with an intuitive tab bar, smart self-test for Z offset, auto leveling, and more with just one tap, Real-time model preview, and vivid motion graphics of printing parameters.
• X-axis Linear Rail, Ultra-smooth Motion The precise linear rail on the X-axis has a carriage slide containing ball bearings, together with the dual Linear Shafts on Y-axis and dual X-axis Lead Screws, making each move accurate, steady and frictionless ( 0.04 friction coefficient), built out of stiff steel, it will stay as new even after long-time use.
• 500mm/s Max Printing Speed Creality Ender-3 V3 KE supports a maximum printing speed of 500mm/s, 8000mm/s acceleration, which can print faster while keeping the print quality, saving 86% of the time compared with other printers.
• More Filaments to Print With The Ender3 V3 KE can handle Hyper PLA, PETG, ABS, TPU (95A), and ASA filaments. Whether you need to print daily items, parts, or products, simply choose the right filament. Achieve faster and better printing with Creality Hyper PLA.
• 4010 Model Cooling Fans on Two Sides Ender-3 V3 KE features the 4010 model cooling fan on each side of the printhead, which cools the freshly printed section rapidly and evenly, keeping your printers always in good shape.

• High-quality PLA filament: The recommended nozzle temperature is about 210-220?C. With quality and consistency in mind, stronger toughness with low shrinkage and better layer adhesion. Meet your needs for functional print projects. (Using tips: Please pass one end of the filament into the fixing hole to avoid being entangled after finishing your printing.)
• Dimensional Accuracy & Consistency: PLA filament. Self-adaptive control system in the manufacturing guarantee the 1.75 mm diameter, dimensional tolerance: +/- 0.02mm, 1 kg spool (2.2lbs) net weight.
• Clog-Free & No Bubble: PLA is vacuum sealed with desiccant to protect the filament from moisture to achieve high-precision printing.No clogging and bubble-free.
• Less-tangle and Easy to Use: Auto-mechanical winding to make sure the wire is neatly arranged. Recommended PLA Filament Extrusion/Nozzle Temperature 180? - 215?.
• Wide Compatibility: Works and Compatibleperfectly with all common 1.75mm FDM 3D printers.

• UPGRADED ENDER 3
• SAFETY PROTECTED POWER SUPPLY
• ADVANCE TECHNOLOGY

• High Precision These tough PLA wires have strict tolerances. Diameter 1.75 mm, dimensional accuracy +/- 0.02 mm without exaggeration.
• Tangle free and without stop: Consistent diameter and roundness, less string formation and deformation, strong adhesion between the layers.
• Environmentally friendly: Made from starch raw materials from renewable plant resources.
• Wide compatibility: Works and harmonizes perfectly with all common 1.75mm FDM 3D printers thanks to the high quality standards of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm.
• Vacuum Pack 329mm 3D printer filament PLA in vacuum packaging; 1kg coil x 2.

• Creality Official Product: CR Touch auto bed leveling sensor fulfilled simple structure and high precision.Performs multi-point detection on the printing platform and records the height of each detection point.Stable quality, long service life, and can be reused more than 100,000 times.
• Widely Application: The upgraded CR Touch bed leveling kit is compatible with Creality Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5//Ender 5s/Ender 5Pro and CR-10 3D Printer. (Note: Only compatible with 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printers).
• Durable & Strong compatibility: Compatible with PEI / sticker/ glass / metal bed.Creality upgraded CR Touch 3d printer auto bed leveling sensor Kit works perfectly with any surface, especially the design of metal push pin allows for longer service life.
• Easy Installation: 3 different kinds of mounting brackets allows for installation on multiple 3d printers. The CR-Touch sensor is simple in structure, convenient for printing when connected. Automatic compensation of Z-axis so as to stable print.
• After-sales Service: If you have any unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.

• WIDE COMPATIBILITY - The upgraded Official Creality Sprite Direct Drive Extruder SE perfect fit for for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro/Ender 5 Plus/CR 10 3D Printer. The 2023 Brand-New sprite extruder SE supports you with a convenient printing time, preferred for direct drive modification.
• DURABLE and STABLE - The dual-gear drive provides the consistency of the filament, ensures stable, smooth, and precise filament feeding. It weighs 210g, only 47.5*42*49cm, but more powerful.
• HIGH TORQUE and SMOOTH FEEDING - The 3.5:1 gear reduction ratio is to reach high torque output, enhances filament extrusion performance, and ensures smooth feeding. This enables extruder force up to 80N, allows for precise control of print feeding. Compatible with various filaments, works with different filaments including PLA/TPU/PETG/ABS, etc.
• ADJUSTABLE TENSION - The adjustable tension allows you to fine-tune the pressure exerted by the drive gears onto the filament according to your preferences which helps to print more exquisite models.
• EASY TO INSTALL - Fix it on the mounting bracket, Plug and play, it simple installation, suitable for more compatible nozzles without changing your nozzle structure. If you have any unsolvable problems during installation, please feel free to tell us, and our after-sales technical team will provide you with detailed solutions within 24 hours.

• UPGRADE: Perfect replacement for Creality 3D Printers Ender 3, CR-10 and CR-10S Series.
• STABLE and DURABLE: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hotend include all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder.
• EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new \"Metal Extruder\" and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame.
• ADVANTAGES: The advantages of our extruder drive is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers' performance. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.
• This extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware.

• NOTE - The length of springs are about 25mm, which is slightly longer than the ender 3 series printers(Including ender 3/ender 3 pro/ender 3 v2). The springs need to cut them shorter than the original ones in order to adapt them to the printer or adjust the hot bed to be higher to fit the springs.
• Suitable for - Upgraded aluminum hand twist level nut are original upgraded replacement part for Ender 3/3 Pro/3 V2/3 Max, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 V3,CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR 10S Pro V2, CR-10 Plus, CR-X, CR 20.
• Metal Material - Metal material is stronger, it will twist more tightly than plastic nuts.
• Easy to use - The torque of these nuts is large, making it easier to fine tune the hot bed.
• Quality - Made by high quality aluminum, last much longer your stock plastic nuts.