Additive Manufacturing Products By E3D

• Genuine E3D Parts
• Our market-leading Hot End: all-metal design, British engineering, high-temperature performance.
• Print All The Things Easily print any filament on the market with less stringing and clogging.
• Customisable Switch up your HotEnd with the full E3D ecosystem of blocks, nozzles, and more!
• High Temperature Performance All-metal design for reliable high-temperature printing.

• Print the Widest Possible Range of Materials: Our signature all-metal design allows you to reliably print high temperature materials, and we've added extra functionality with soft and flexible filamen
• High Temperature Performance: The V6 can comfortably reach 300?C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) or PT100 you can reach o
• Compact: We've focussed on cutting as much bulk from the E3D V6 as possible. This means an overall length of just 62mm, and low bulk in X/Y dimensions!
• Easy to Use: Our new thermistor cartridge simply slides into place and is secured with a single screw. We use high temperature glass sleeving to insulate the thermistor legs as well. This makes instal
• High Quality Printing: We've kept our sharp thermal transition that gives the high quality printing performance users have come to expect from E3D HotEnds. A sharp thermal break gives better control o

• Genuine E3D Parts
• The E3D V6 Hot End: Smaller, Easier, High Performance
• High Temperature Performance
• The V6 can comfortably reach 300 degree C with the supplied thermistor
• Low bulk in X/Y dimensions

• Ready for Revo. Revo Prusa Edition is designed to work with Revo Nozzles, so you can perform nozzle swaps with your fingers at room temperature without complex tools or hot tightening. Each Revo Nozzle is factory sealed, making it much simpler to use and more reliable than most HotEnd technology available today.
• Enhanced performance. Revo Prusa Edition uses a Revo HeaterCore, our latest HotEnd heating and sensing architecture. It reaches temperature much faster than a traditional aluminium heaterblock, and it's much safer: a positive temperature coefficient (PTC) means the HeaterCore can't melt at extreme temperatures, reducing hazards in the event of a thermal runaway.
• A new look. An anodised black heat sink distinguishes Revo Prusa Edition from its predecessor.
• Please note: You may need to adjust your Z offset when changing nozzles. Prusa i3 MK2 variants are most often 12V systems and are therefore not compatible with this HotEnd variant please see here for the 12V Revo Six. We have not tested Revo Prusa Edition with MMU or MMU2, if you are interested in this use case, we have a dedicated discord channel with users who are experimenting with this setup.

• No machine redesign. Revo Six is a top choice if you want to update your old E3D V6 setup to the latest generation of E3D HotEnd technology. It has the same height, the same diameter, and the same groove mount as the E3D V6, so it drops straight into V6-fitted machines without the hassle of redesigning print head mounts and accessories. Just fit it, connect the Revo HeaterCore, and you?re ready to 3D print.
• Ready for Revo. Revo Six is designed to work with Revo Nozzles, so you can perform nozzle swaps with your fingers at room temperature without complex tools or hot tightening. Each Revo Nozzle is factory sealed, making it much simpler to use and more reliable than most HotEnd technology available today.
• Enhanced performance. Revo Six uses a Revo HeaterCore, our latest HotEnd heating and sensing architecture. It reaches temperature much faster than a traditional aluminium HeaterBlock, and it's much safer: a positive temperature coefficient (PTC) means the HeaterCore can't melt at extreme temperatures, reducing hazards in the event of a thermal runaway.
• A new look. An anodised black heat sink distinguishes Revo Six from its predecessor, and every unit ships with a premium crystal-clear fan duct so your machine will stand out from the crowd.
• Compatible with: Prusa i3 MK2/ MK3 variants (make sure you select the correct voltage for your setup)

• Ready for Revo. A groove at the bottom of the sink accepts a Revo HeaterCore spring. It's compatible with our Revo ecosystem, so you can change nozzles without tools or hot tightening using just your fingers.
• Complements your Voron. Includes an anodised red aluminium heatsink to complement your Voron accented parts.
• Rigid mounting. This is a rigid mounted design that uses four M3 x 0.5 bolts to secure to your Voron 3D printer.
• Compatible with: Voron 1 Voron Trident Voron Switchwire Voron 2.4 Voron Legacy Voron 0.1
• Please note: - For full mounting instructions and STL files for Voron printed parts visit: https://docs.vorondesign.com/ - You may need to adjust your Z offset when changing nozzles.

• Dual-Drive Compact
• Integrated System Filament
• Constraint Like No Other
• Mounting
• A Never-Before-Seen Heatsink

• Smaller, lighter, redder. Say hello to the Revo Voron, the HotEnd of choice for Voron 3D printers. We've developed this Revo-compatible cold side in collaboration with Team Voron. Boost your Voron 3D printer with RapidChange capabilities so you can change nozzles without tools or hot tightening!
• We've developed this Revo-compatible cold side in collaboration with Team Voron. It's intended for use with the Voron StealthBurner, which includes an integrated cold side fan. It's compatible with our Revo ecosystem, so you can change nozzle size without tools or hot tightening using just your fingers.
• Ready for Revo: a groove at the bottom of the sink accepts a Revo HeaterCore spring. It's compatible with our Revo ecosystem, so you can change nozzles without tools or hot tightening using just your fingers.
• Complements your Voron: Includes an anodised red aluminium heatsink to complement your Voron accented parts.
• Rigid mounting: This is a rigid mounted design that uses four M3 x 0.5 bolts to secure to your Voron 3D printer. Compatible with: Voron 1, Voron 2.4, Voron Trident, Voron Legacy, Voron Switchwire, Voron 0.1.

• Genuine E3D Parts
• Our market-leading Hot End: all-metal design, British engineering, high-temperature performance.
• Print All The Things Easily print any filament on the market with less stringing and clogging.
• Customisable Switch up your HotEnd with the full E3D ecosystem of blocks, nozzles, and more!
• High Temperature Performance All-metal design for reliable high-temperature printing.

• Genuine E3D Parts
• Our market-leading Hot End: all-metal design, British engineering, high-temperature performance.
• Print All The Things Easily print any filament on the market with less stringing and clogging.
• Customisable Switch up your HotEnd with the full E3D ecosystem of blocks, nozzles, and more!
• High Temperature Performance All-metal design for reliable high-temperature printing.

• Genuine E3D Parts
• Plated Copper Volcano block and Plated Copper 0.8mm Volcano nozzle.
• Comes with high precision heater cartridge, thermistor cartridge and universal fixings kit.
• All you need to attach to your hotend and print BIG!