Additive Manufacturing Products By EIBOS

• FILAMENT DRYER & STORAGE BOX the filament dryer Cyclopes is specifically made for the purpose of drying 3D printer filament, aimed at removing the moisture that filament absorb from ambient exposing. Printing while drying, the dryer function as both storage box and filament holder (Note: you will need manually rotate the rolls when drying if not printing to avoid the direct hot air from the bottom)
• REAL-TIME HUMIDITY MONITOR & ADJUSTABLE TEMPERATURE a dramatic drop in the humidity level clearly indicated by the real-time humidity monitor, (NOTE: the dryer came with a A76/LR44 button battery, just switch the ON/OFF button on the back of monitor before using), measurement range from 10%-99%. Heating temperature can be adjusted to meet needs of various filaments, the setting temp will be displayed by the LCD panel. The default time is 6hrs, you can also reset from 0-24hrs up to 70 degree C or even infinite heating time regarding your needs
• MULTIPLE EXIT HOLES & COMPATIBLE WITH MULTIPLE SPOOLS Cyclopes works for a wide range of filament types and diameters, compatible with 1.75mm, 2.85mm, 3.00mm 3D filament such as Nylon, PLA, PETG, TPU, ABS, Silk, Carbon fiber, Wood, etc. Teflon tube included, 10 exits holes are available for you to choose from. Extra large space allows usage 4 rolls of 0.5kg filaments, 2 rolls of 1kg filaments, 1 roll of large filament(?2kgs) at the same time, it has two built-in rotating shafts that allow the filament to continuously rotate in a dry hot box to remove moisture (Note: for Single Large Spool-217x174mm, Dual Small Spools: 217x80mm(H*W)
• BUILT-IN FAN & 100W PTC HEATER a built-in fan is designed to circulate the hot air inside the filament dryer box to make drying system better remove the moisture, different from applying normal heater 48W PI heating pad to heat up space, our product use 100W PTC heater which is more durable, energy-saver, and environmentally friendly, makes filament drying more evenly
• RESTORE YOUR BRITTLE FILAMENT keep your old left out brittle filament before having our filament dryer, Cyclopes will help drying and restoring the spools, even make them better than the brand new unit, impeccable prints are the result. No adhesion, cloggings, bubbles, or any plastic strings. Easy to use, no need extra set up

• DRYER & STORAGE BOX: the dryer box is specifically made for the purpose of drying 3D printer filament, intended to remove the moisture from a spool of filament caused by ambient exposing. Filament can be used while in the box, the dryer function as both storage box and filament holder. Also 2 slots at the corners were designed for placing dessicant,keep your filament in longer drying condition.Sealed protection, comprehensive dust-proof and damp, no impurities. US Plug, input voltage 110V-120V
• INFINITE ADJUSTABLE TEMPERATURE & HUMIDITY MONITOR: based on infinite adjustable temperature mode, you can adjust specific heating temperature to accommodate needs of various filaments by simply turning the knob from 40-65 degree C, with main types of filaments marked for your fast use. Equipped with individual humidity sensor, measurement range from 10%-99% (NOTE: A76/LR44 button battery has ALREADY included), real-time data will be indicated by the LCD monitor, the dryer is designed to reduce humidity levels to 10%
• COMPATIBLE WITH MULTIPLE SPOOLS: works for different filament types and diameters, compatible with 1.75mm, 2.85mm, 3.00mm 3D filament such as Nylon, PLA, PVA, PC, TPU, PETG, PA, Wood, ABS, Silk, etc. Exquisite space allows usage of single roll with spool size: 220x72mm, Inner size: 50mm, with little rubber seals to fit around a PTFE tube, and smooth rotating shaft allows the filament to continuously rotate in a dry hot box to remove moisture
• HOT-AIR CIRCULATION HEATING SYSTEM: applying hot air circulation heating which makes the temperesuture inside box more even, filament dryer box aims at drying the wet or brittle 3D printer filament, or even make it better than the brand new unit. No plastic strings and clogging, no need worry about your old left out spools, this dryer box can help revive them easily
• 45W PTC HEATER & BUILT-IN FAN: different from applying ordinary heater 48W PI heating pad to heat up space, eibos easdry fialment dryer uses 45W PTC heater which is durable, energy-saver, and environmentally friendly, makes filament drying more evenly. Also a Built-in fan is designed to circulate the hot-air (the outside air is heated before being circulated ) inside the chamber to make drying system better remove the moisture

• DRYER & STORAGE BOX: the dryer box is specifically made for the purpose of drying 3D printer filament, intended to remove the moisture from a spool of filament caused by ambient exposing. Filament can be used while in the box, the dryer function as both storage box and filament holder. Also 2 slots at the corners were designed for placing dessicant,keep your filament in longer drying condition.Sealed protection, comprehensive dust-proof and damp, no impurities. US Plug, input voltage 110V-120V
• INFINITE ADJUSTABLE TEMPERATURE & HUMIDITY MONITOR: based on infinite adjustable temperature mode, you can adjust specific heating temperature to accommodate needs of various filaments by simply turning the knob from 40-65?, with main types of filaments marked for your fast use. Equipped with individual humidity sensor, measurement range from 10%-99% (NOTE: A76/LR44 button battery has ALREADY included), real-time data will be indicated by the LCD monitor, the dryer is designed to reduce humidity levels to 10%
• COMPATIBLE WITH MULTIPLE SPOOLS: works for different filament types and diameters, compatible with 1.75mm, 2.85mm, 3.00mm 3D filament such as Nylon, PLA, PVA, PC, TPU, PETG, PA, Wood, ABS, Silk, etc. Exquisite space allows usage of single roll with spool size: 220x72mm, Inner size: 50mm, with little rubber seals to fit around a PTFE tube, and smooth rotating shaft allows the filament to continuously rotate in a dry hot box to remove moisture
• HOT-AIR CIRCULATION HEATING SYSTEM: applying hot air circulation heating which makes the temperesuture inside box more even, filament dryer box aims at drying the wet or brittle 3D printer filament, or even make it better than the brand new unit. No plastic strings and clogging, no need worry about your old left out spools, this dryer box can help revive them easily
• 45W PTC HEATER & BUILT-IN FAN: different from applying ordinary heater 48W PI heating pad to heat up space, eibos easdry fialment dryer uses 45W PTC heater which is durable, energy-saver, and environmentally friendly, makes filament drying more evenly. Also a Built-in fan is designed to circulate the hot-air (the outside air is heated before being circulated ) inside the chamber to make drying system better remove the moisture