Additive Manufacturing Products By Longer

• A large volume design, measuring 73*76*72cm(28.74\" x 30.71\" x 28.35\"), is used in the Longer 3D printer enclosure and is commonly compatible with other 3D Printer.
• Less cracking and warping is produced by using premium material and printing at a steady temperature. The cracking, warping, and shrinkage of the printing material can be efficiently reduced by maintaining the cavity's temperature.
• Non-foaming, moisture-proof, and waterproof It may guarantee dryness in the box and stop the material from absorbing water during the printing process, which might result in printing failure or even foaming or wire drawing.
• Real-time observation through a big window. Higher light transmission and better detail observation are provided by the big observation windows on the front and top. Desiccant placement is likewise easy.
• Easy installation and folding. After use, it may be quickly folded for storage to conserve space.

• Made from premium spring steel that is bendable. The PEI board adheres firmly to the magnetic base and is functional even when heated to a high temperature by the nozzle. The flexible magnetic stickers can sustain extended use on the high-temperature heating beds without deforming when bent.
• Without tape or glue, filaments may be attached to the print bed easily. Simply take out the PEI sheet and gently bend it several times to instantly remove prints.
• 310mm*310mm is appropriate for LK5 PRO, LK1, U20 PRO, etc. ABS, PETG, PLA, and any other filament can be used on the PEI print side.
• Simply place the bottom adhesive side on top of the unheated bed to install. Magnetic stickers can be attached to PEI sheets with this technique.
• It won't be simple to remove the magnetic sticker if it is attached to the bed. Therefore, before removing the glue and sticking it to the heated bed of the 3D printer, please make sure you measure it precisely.

• Printing Environment Constant Temperature : LONGER 3D printer warm tent, keep a constant temperature printing environment, reduce the adverse effects on printed models during cold weather, improves print stability and printing results.
• Dimensions and Compatibility :Large size LONGER 3D printer warm tent 729x762x719mm(28.7\"x30\"x28.3\") PVC laminated polyester constant tem, suitable for 99% of 3d printers on the market.
• Safe to Use : The interior uses pure aluminum film and flame-retardant appearance material. Technically, if in a fire, it will melt and not fire itself off the enclosure and will not spread. Fireproof, Waterproof, and Dustproof.
• Sturdy and Easy Installation : Rugged and removable stainless steel tube bracket, Quick and easy installation, folding storage, easy to carry, multi-faceted observation, side reserved tool pockets. There are zippers on the front of the tent for your utmost convenience.
• Multifunction :LONGER 3D printer warm ten dustproof and good noise reduction. also be used as a dust cover, providing a dust-proof and clean environment for printers, filaments, and accessories. Tool bag on the side.

• A large volume design, measuring 73*76*72cm(28.74\" x 30.71\" x 28.35\"), is used in the Longer 3D printer enclosure and is commonly compatible with other 3D Printer.
• Less cracking and warping is produced by using premium material and printing at a steady temperature. The cracking, warping, and shrinkage of the printing material can be efficiently reduced by maintaining the cavity's temperature.
• Non-foaming, moisture-proof, and waterproof It may guarantee dryness in the box and stop the material from absorbing water during the printing process, which might result in printing failure or even foaming or wire drawing.
• Real-time observation through a big window. Higher light transmission and better detail observation are provided by the big observation windows on the front and top. Desiccant placement is likewise easy.
• Easy installation and folding. After use, it may be quickly folded for storage to conserve space.

• Composition : The LONGER PEI membrane is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back.
• Easy to use : Peel off the protective layer of the bottom tape, glue the magnetic base on the heat bed, the flexible stainless platform can be easily attached and removed, without clips to hold it in place.
• Large Size : 310x310mm/12.2x12.2inch. It is applicable with LK1/LK5 PRO, or other printers that print in the same print size, such as the Ender 3 max, etc.. (Please measure your hot bed and make sure it is the right size for you).
• Easy Mold pickup ?Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
• Caution&After-Service : Because the thickness of the product itself must be re-leveling after attaching this item to avoid damage the surface. Please leave a little gap like 0.1-0.2mm when leveling the platform which can offer you a better experience. If you have any question or need technical support about the product, Please press \"Ask a question\" through our storefront's page, report an issue through the "Your Orders? page. We will respond with 24 hours.

• Made from premium spring steel that is bendable. The PEI board adheres firmly to the magnetic base and is functional even when heated to a high temperature by the nozzle. The flexible magnetic stickers can sustain extended use on the high-temperature heating beds without deforming when bent.
• Without tape or glue, filaments may be attached to the print bed easily. Simply take out the PEI sheet and gently bend it several times to instantly remove prints.
• 310mm*310mm is appropriate for LK5 PRO, LK1, U20 PRO, etc. ABS, PETG, PLA, and any other filament can be used on the PEI print side.
• Simply place the bottom adhesive side on top of the unheated bed to install. Magnetic stickers can be attached to PEI sheets with this technique.
• It won't be simple to remove the magnetic sticker if it is attached to the bed. Therefore, before removing the glue and sticking it to the heated bed of the 3D printer, please make sure you measure it precisely.