Additive Manufacturing Products By novo3D

• 1. Light and simple design
• 1. High torque capacity
• 1. High rigidity
• 1. High positioning accuracy, high rotating accuracy
• 1. High efficiency

• Made from high quality metal material, these corner brackets plate are durable and solid, good rust resistance and better performance.
• Suitable for european standard 2020 series aluminum profiles
• There are no fixed positions for mounting giving you the freedom to build your own design easily enabling shorter design and assembly times.
• Widely used for building industrial aluminum frame structures,3D printers, CNC routers, laser engravers, robotics projects

• Inner Diameter: 8mm
• Outer Diameter: 16mm
• Thickness: 5mm .
• Easy Installation & Replacement
• Less Friction, Higher Speeds

• Extremely hard
• Plasma-polished nozzle
• Extremely long life
• With a special coating
• Easy to install and change.

• The tube fitting comes in a wide variety of tube and thread sizes.
• Even after installation, the direction of the tubing can be changed freely.
• This fitting has a 4.3mm output hole, so the tubing can be fixed into the connector.
• The Pneumatic Coupler Air Connectors PC4 4MM Straight Fitting For PTFE Bowden Tube 3D Printer is designed for polyurethane or nylon tubing. Made of nickel-plated brass for corrosion resistance.
• Oval release ring assists to connect the hose easily by manual, without special tools required.?Outside (and inside available) hexagon wrench.

• Alter the vibration characteristics of rotating units
• Connect driving and the driven part and also Introduce protection against overloads
• Provide for the misalignment of the shafts. To introduce mechanical flexibility
• Reduce the transmission of shock loads from one shaft to another

• Compact in size.
• Exact and precise direct movement.
• Smooth, calm, and low support.
• Insignificant number of parts.
• Most are self-locking.

• Surface Treatment: Nickel.
• Mode of action: Interlocking.
• Materials: Carbon steel.

• Print all variety of filaments such as PLA, TPU, ABS,PETG and all other filaments.
• Makes assembly and maintenance easier, assembly parts can be easily replaceable.
• Low weight of entire assembly provides High quality printing.
• Reliable, No clogging and Stringing of nozzle.
• Shorten heat up times of nozzle and increase accurate control of temperature.

• Wear-resistant copper sets added in both the inlet and outlet to
• Effectively extend the product life.
• It will send the signal to the printer when the filament is run out.
• Printer will pause the print job until the new filament is loaded.
• Designed to detect whether the filament is run out during the printing process.

• Alter the vibration characteristics of rotating units.
• Connect driving and the driven part and also Introduce protection against overloads.
• To introduce mechanical flexibility. Reduce the transmission of shock loads from one shaft to another.
• To slip when overload occurs.
• It best fits into linear actuators where the Stepper Motor is fitted into aluminium profile.

• This module could be used for dividing X, Y and Z axis driver motors and compatible with almost all 3D printer control boards.
• This Parallel module drives two stepper using single motor driver chip
• suitable for mini printers or small current motors in parallel (with the same motor in parallel, the current are divided evenly)
• Compatible with all 3D printer control boards Ramps 1.4 , SKR V1.3, SKR pro, MKS GEN board
• Motor parallel module with 10cm motor cable with Connector

• Keep the nozzle clean and avoid the nozzle being blocked.
• Increase temperature stability, especially if high airflow cooling is used around the nozzle to cool the print.
• Made of heat-resistant, non-stick silicone material instead of molten plastic to aid in material fusion.
• High temperature resistance to prevent burns caused by high temperatures during work.

• The tube fitting comes in a wide variety of tube and thread sizes.
• Even after installation, the direction of the tubing can be changed freely.
• The Pneumatic Coupler Air Connectors PC4 4MM Straight Fitting For PTFE Bowden Tube 3D Printer is designed for polyurethane or nylon tubing.
• Made of nickel-plated brass for corrosion resistance.
• Even after installation, the direction of the tube can be changed freely. Oval release ring assists to connect the hose easily by manual, without special tools required.?Outside (and inside available) hexagon wrench.

• Convenient to use, they can be simply fastened with bolts and nuts, (bolts and nuts are not included).
• Finish: Sand blasting,?High strength and hardness. Durable in use.
• 100% brand new and high quality.
• 2020, 3030 and 4040 series Aluminum Profile Connector widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects, Furniture, etc.