Additive Manufacturing Products By POLISI3D

• The Hotend is designed and manufactured by our partner (PHAETUS). The quality is very high. The printing temperature for this hotend can reach up to 500 degree if your heater and temperature sensor allows, heater tube and temperature sensor are not included here, please know before ordering.This is a drop in All Metal Conversion kit for E3D V6 Hotend printers. It requires absolute zero modification of the printer to install.
• The hotend heater block is mainly composed of copper alloy material which has the advantage of faster heating and better heat dissipation. All Metal , with overall high temperature resistance up to 500C.
• eatbreak inner hole roughness is Ra 0.3 Smoother flow of filament. Conical fitting of heatbreak and Aluminum heat sink makes a better heat dissipation
• sing plated copper nozzle 0.4mm for 1.75mm filament, Compatible with all filaments, including PLA, ABS, PETG, TPU, PP, PC Nylon, PEEK, PEI and composite materials containting abrasive additives, such as carbon fiber, steel , wood, boron carbide, tungsten and phosphorescent pigment.
• Package: 1set hotend, NO HEATER TUBE AND THERMISTORS, PLEASE KNOW

• Updates: Updated with high quality stainless steel pipe light but strong instead of Iron pipes, to keep the frame stainless, longer lifetime, and with Larger View Window, with reflective strip and with LED light, which you can connect it onto your stocked Phone charger Head which output power should be 5V 1A.
• Heat Insulation: This cover can keep the printing environment with constant temperature, to advoid the low temperature impacts on printed models when winter comes.
• Easy and Quik Installation: to use fixed-angle bracket to install all stainless steel pipes into a frame, then extend the folding shed, put the frame inside the shed.
• Multi-coating process, silicone fiber fabric, keep the interior warm, improve the printing result and decrease heat loss, Dustproof, waterproof, classical outlook, with side tool bag
• Enclosure volume: L*W*H 635x535x750mm (25\" * 21\" 29.5\"), Not over big, less heat loss, suitable for ender 3 Ender 3 Pro/Ender 3S / Ender 3 V2 /CR 20/CR 20 Pro /Ender 3X/ Ender 3 pro X, Prusa i3 and other similar size 3D Printers.

• This upgrade kit is designed by Mr Ben Levi, for Ender 3 pro 3d printer also compatible with ender-3 Pro V2 3D Printer, very grateful for him
• Please Note: the whole upgrade kit Should have 4sets MGN12H rail with blocks which is not included here, you cannot use it unless you have the rail kits together, please search ASIN: B08LDN1VMW and source 4 quantities for that link.
• About the installation instruments, please refer to thingiverse forum or Youtube by searching keywords \"BLV ender 3 Pro Upgrade\"
• This kit includes 2pcs brackets for installation power supply, Pls refer to one of the photos in our listing
• Package: 1set aluminum plates +1set screws kit+ 1piece Y axis Belt(not clamped)+1piece X axis Belt (Not Clamped, you can use cable ties instead of metal clamp to fix the belt at X axis)

• This 3-in-1 out hot end kit is designed Compatible with Geeetech A10T,A20T 3D printer
• It can greatly reduce the risk of clogging or jamming so as to save filament for you.
• With its good craftsmanship, three pieces of different color filament could uniformly mixed together to create amazing prints. Besides, its standard 0.4mm nozzle delivers satisfactorily smooth surface finish. Mix-color printing enriches your daily life.
• Package: 1set hotend installed with 24V 20W heaters, themistor

• This enclosure tent is designed and produced by official Creality, High Quality Guaranteed. Landed Size: 700*750*900mm, Pls measure your printer total dimensions before ordering it.Quick and easy assembly, folding storage designed, portable, and easy to carry, multi-windows for easier observation, tool pockets reserved, Economical 3D printing room!
• The M6 MK8 nozzle 0.4mm material is brass to keep good thermal conductivity, the Nickel coating can increase the lifetime of the nozzle and prevent the nozzle surface Oxidation. Nickel plating has High hardness and wear resistance, Apply Nickel plating on the nozzle surface can reduce the friction, to make it smoother when inputing filament. But The Nozzle is not suitable for CR-10S PRO/V2 Or CR-10 Max 3D Printer, Pls know before ordering.
• Constant Temperature: Some customers always worry about the Heat dissipation too quickly, which causes the wrapping so often, the 3d printer enclosure can better keep a constant temperature printing environment, reduce the impact of printed products when low-- temperature weather, improve printing stability. make sure the print comes out perfectly.
• Dustproof and good noise reduction: Some customer is frustrated about the noise to come from the machine while it is printing, and the printer will get dirty if you didn't use it too much.Stable Structure: Equipped with a selection of Iron pipes, stable structure, and abundant space.
• The interior uses Pure aluminum film and flame retardant appearance material. if fire causes, it will melt and will not fire itself of the enclosure. fire insulation so that it won't be able to spread, for better keep your family and your house safe.

• The Hotend is designed and manufactured by our partner (PHAETUS). The quality is very high. The printing temperature for this hotend can reach up to 500 degree if your heater and temperature sensor allows, heater tube and temperature sensor are not included here, please know before ordering.This is a drop in All Metal Conversion kit for E3D V6 Hotend printers. It requires absolute zero modification of the printer to install.
• The hotend heater block is mainly composed of copper alloy material which has the advantage of faster heating and better heat dissipation. All Metal , with overall high temperature resistance up to 500C.
• eatbreak inner hole roughness is Ra 0.3 Smoother flow of filament. Conical fitting of heatbreak and Aluminum heat sink makes a better heat dissipation
• sing plated copper nozzle 0.4mm for 1.75mm filament, Compatible with all filaments, including PLA, ABS, PETG, TPU, PP, PC Nylon, PEEK, PEI and composite materials containting abrasive additives, such as carbon fiber, steel , wood, boron carbide, tungsten and phosphorescent pigment.
• Package: 1set hotend, NO HEATER TUBE AND THERMISTORS, PLEASE KNOW

• Updates: Updated with high quality stainless steel pipe light but strong instead of Iron pipes, to keep the frame stainless, longer lifetime, and with Larger View Window, with reflective strip and with LED light, which you can connect it onto your stocked Phone charger Head which output power should be 5V 1A.
• Heat Insulation: This cover can keep the printing environment with constant temperature, to advoid the low temperature impacts on printed models when winter comes.
• Easy and Quik Installation: to use fixed-angle bracket to install all stainless steel pipes into a frame, then extend the folding shed, put the frame inside the shed.
• Multi-coating process, silicone fiber fabric, keep the interior warm, improve the printing result and decrease heat loss, Dustproof, waterproof, classical outlook, with side tool bag
• Enclosure volume: L*W*H 635x535x750mm (25\" * 21\" 29.5\"), Not over big, less heat loss, suitable for ender 3 Ender 3 Pro/Ender 3S / Ender 3 V2 /CR 20/CR 20 Pro /Ender 3X/ Ender 3 pro X, Prusa i3 and other similar size 3D Printers.

• Note: May require disabling of the automatic bed leveling since the ruby tip is not conductive before using it.
• It can withstand high temperature 550 degrees and Without any abrasion after printing 200 hours gemstones Ruby Nozzle.
• This nozzle has very high quality, The hole is central and round.
• The MK8 Ruby Nozzle will work with a huge range of materials. PLA, ABS, CPE/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment and so on.

• This upgrade kit is designed by Mr Ben Levi, for Ender 3 pro 3d printer also compatible with ender-3 Pro V2 3D Printer, very grateful for him
• Please Note: the whole upgrade kit Should have 4sets MGN12H rail with blocks which is not included here, you cannot use it unless you have the rail kits together, please search ASIN: B08LDN1VMW and source 4 quantities for that link.
• About the installation instruments, please refer to thingiverse forum or Youtube by searching keywords \"BLV ender 3 Pro Upgrade\"
• This kit includes 2pcs brackets for installation power supply, Pls refer to one of the photos in our listing
• Package: 1set aluminum plates +1set screws kit+ 1piece Y axis Belt(not clamped)+1piece X axis Belt (Not Clamped, you can use cable ties instead of metal clamp to fix the belt at X axis)

• This 3-in-1 out hot end kit is designed Compatible with Geeetech A10T,A20T 3D printer
• It can greatly reduce the risk of clogging or jamming so as to save filament for you.
• With its good craftsmanship, three pieces of different color filament could uniformly mixed together to create amazing prints. Besides, its standard 0.4mm nozzle delivers satisfactorily smooth surface finish. Mix-color printing enriches your daily life.
• Package: 1set hotend installed with 24V 20W heaters, themistor

• Integrated double feed port design, meet the printing needs of two filaments, eliminate the hidden trouble of inaccurate leveling, and make leveling more convenient than ever.
• Bimetal Heatbreak will come in this parcel, which is made from two components, Copper and Titanium TC4. Titanium TC4 reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction.Bi-Metal Heatbreak melts filament faster , The inner wall of the titanium is very smooth so that the filament can pass through and reduce clogging
• Copper plated nozzle meet the requirements of high temperature and wear - resistant filaments printing, can reach up to 500C degree If your heater and temperature support.
• M2 Titanium alloy supporting screws with high strength and very low heat conduction, meet the function of one - handed nozzle changing and ensure the low heat conduction.
• The hotend will be installed with bimetal heatbreak and plated copper nozzle. The stainless steel heatbreak and brass nozzle are gift as spare parts.

• This extruder is from Creality, 24V with 0.4mm nozzle kit to upgrade Ender 3, ender 3s, ender 3 V2 or Ender 3 Pro 3D printer to be direct extruding, More Precise feed-in.
• New upgraded direct extruding nozzle kit has high quality, Integrated structure is convenient for wiring and replacing.
• Direct extruding smooth feed-in: It comes with 40mm Nema17 quality motor, lower torque requirements on stepper motor, reducing the possibility of nozzle blockage when retracting filament and malfunction when loading new filament.
• Compatible with more types of filaments when printing under high temperature, like flexible TPU. It can optimize TPU printing performance.
• Easy to install and use: Switch direct extrusion or bowden extrusion at any time and easy to disassembly. It doesn't affect the inherent function of printer because it is a complete extrusion kit. please must be careful for the cables connections

• This is including 5pcs Limit Switch Kit For Ender-3/Ender-3 S/Ender-3 Pro/Ender-3 V2/Ender-3 Max/CR-10/CR-10 V3/CR-10 S4 and other suitable 3D Printers
• They are original from creality, high quality switching element,Sensitive trigger, Quiet, high precision, high repeat positioning accuracy.
• 3Pin N/O N/C Control, Reliable performance, easy to use, durable, long serice Life.
• Package: 5pcs limit switches

• Nozzle size: 0.8mm, M6 thread for 1.75mm filament use
• The nozzle material is brass to keep good thermal conductivity, the Nickel coating can increase the lifetime of the nozzle and prevent the nozzle surface Oxidation
• Nickel plating has High hardness and wear resistance, Apply Nickel plating on the nozzle surface can reduce the friction, to make it smoother when inputing filament
• Compatible with V6 V5 hotend, Ultimaker 2+ olsson block hotend, Prusa i3 Mk3 mk3s Anycubic I3 Mega 3D Printer

• metal shell, high precision, stable operation efficient heating and heat dissipation
• Integrated Design: Brass nozzle heating/cooling system leveling system V pully Fixed wiring port, supper simple installation.
• High Precision Intelligent Leveling: Brand new automatic leveling sensor, high precision andlow energy consumption automatic leveling, accurate data transmission, standard deviation is only 0.005mm.
• More efficient heating and heat dissipation: Advanced thermistor & heating tube assembly, rapid heating. The heatsink adopts a hollow structure, which makes heat dissipation more efficient. Nozzle equipped with a powerful silent cooling fan can increase heat dissipation by 30%. The data comes from simulaiton analysis of Creality Lab.
• Package: 1set Full Assembled Hotend kit with Heater, thermistor , PTFE tube and silicone cover, LED, Cooling Systems like our first photo shows