Additive Manufacturing Products By RI RESIONE

• Tough as ABS: The mechanical properties of the K resin prints are similar to tough thermoplastic materials, with high tensile strength and excellent impact strength. The prints can be machined repeatedly
• High Precision: This material is not easy to overexpose even under a strong light source, and the printed parts are accurate in size. Any 3d data can be accurately restored
• Black Color is High in Saturation: The black color is high in saturation, which makes prints have a good texture, and it looks more like an injection molded product after polishing
• Mixed with F69/F39/F39T: Tough resin K/M58/M68/G217 can be mixed with F69/F39/F39T resin, which can make the printed parts tougher, more durable, and not brittle for a long time
• Wide Adaptability: Designed for 385~405nm UV LED light source, it is suitable for mainstream LCD/MSLA/DLP resin 3D printers on the market

• Very Low Shrinkage: D01S 3d resin is designed for dental use, and the dental models retain their original size and shape for weeks, so can be easily assembled
• High-Dimensional Accuracy: The model for dental applications requires extremely high dimensional accuracy, which directly affects the experience of dentists and patients. After several years of practical application of D01S 3d printer resin, the printing results are undoubtedly satisfactory to both parties
• Hard and Wear-resistant Surface: D01S resin 3d printer is often used to 3D print plug-in dental models, they are not rubbed out of powder during assembly, nor will hard objects scratch them
• Matte Surface and Plaster Texture: D01S uv resin printed dental model has a matte surface and plaster texture, which is easy to observe the edge line of the dental model, and also ensures that the model is accurately scanned
• Broad adaptability: D01S dental resin is suitable for all mainstream LCD/MSLA/DLP 3d printers on the market, including RGB or Mono screen printers

• High elongation Elongation at Break: 255%. This can fully ensure that the prints are not easily broken during repeated bending and stretching.
• Tear resistance Tear Strength: 47.2KN/m. It has better tear strength than other flexible resins, which means that the prints will not be easily torn during use.
• Soft like rubber Shore Hardness:60~75A. The prints is very soft at a temperature above 20 degree C, but the lower the temperature, the harder it will become.It will become very hard and impact resistant at 5 degree C.
• Wide adaptability Designed for 385~405nm UV LED light source, it is suitable for mainstream LCD/MSLA/DLP resin 3D printers on the market.
• Professional after-sales service Our customer service team is composed of engineers who have years of experience in resin 3D printing to ensure that you can print the model smoothly.

• Sturdy like ABS: The mechanical properties of the M58 resin printed parts are similar to tough thermoplastic materials, with high tensile strength and excellent impact strength, and can drill holes and nails in fragile locations
• Wear-resistant and Scratch-resistant: The surface of the M58 resin print is very hard, the assembly position will not drop powder after friction, which is suitable for printing movable joints, gears, or bearing parts
• Clear and Sharp Details: M58 3d resin has high molding accuracy, is not easy to overexpose, and can accurately restore the fine details in 3d files
• Mixed with F69/F39/F39T: Tough resin K/M58/M68/G217 can be mixed with F69/F39/F39T resin, which can make the printed parts tougher, more durable, and not brittle for a long time
• Wide Adaptability: Designed for 385~405nm UV LED light source, it is suitable for mainstream LCD/MSLA/DLP resin 3D printers on the market

• The prints are not easily damaged: TH72 prints can withstand accidental accidental drops, and you can significantly bend or even fold prints with a wall thickness of less than 3mm. It is ideal for printing durable figures.
• Long-lasting toughness: TH72 prints will not slowly become brittle over time. After testing, 1 month of summer sun and rain and 8 hours of high temperature drying at 50-60 degree C will not make it lose its toughness and strength, it has good weather resistance.
• Hollowed out prints will not crack: The hollowed out model often crack slowly because the interior cannot be completely cleaned and cannot be post-cured. TH72 will not, allowing you to save more material.
• Small shrinkage and deformation after a long time: Even if it is a slender or thin-walled printed part, its deformation is significantly smaller than other materials after it is fully post-cured and placed for a long time.

• Tough as ABS: The mechanical properties of the K resin prints are similar to tough thermoplastic materials, with high tensile strength and excellent impact strength. The prints can be machined repeatedly
• High Precision: This material is not easy to overexpose even under a strong light source, and the printed parts are accurate in size. Any 3d data can be accurately restored
• Black Color is High in Saturation: The black color is high in saturation, which makes prints have a good texture, and it looks more like an injection molded product after polishing
• Mixed with F69/F39/F39T: Tough resin K/M58/M68/G217 can be mixed with F69/F39/F39T resin, which can make the printed parts tougher, more durable, and not brittle for a long time
• Wide Adaptability: Designed for 385~405nm UV LED light source, it is suitable for mainstream LCD/MSLA/DLP resin 3D printers on the market

• High elongation Elongation at Break: 255%. This can fully ensure that the prints are not easily broken during repeated bending and stretching.
• Tear resistance Tear Strength: 47.2KN/m. It has better tear strength than other flexible resins, which means that the prints will not be easily torn during use.
• Soft like rubber Shore Hardness:60~75A. The prints is very soft at a temperature above 20?C, but the lower the temperature, the harder it will become.It will become very hard and impact resistant at 5?C.
• Wide adaptability Designed for 385~405nm UV LED light source, it is suitable for mainstream LCD/MSLA/DLP resin 3D printers on the market.
• Professional after-sales service Our customer service team is composed of engineers who have years of experience in resin 3D printing to ensure that you can print the model smoothly.

• Sturdy like ABS: The mechanical properties of the M58 resin printed parts are similar to tough thermoplastic materials, with high tensile strength and excellent impact strength, and can drill holes and nails in fragile locations
• Wear-resistant and Scratch-resistant: The surface of the M58 resin print is very hard, the assembly position will not drop powder after friction, which is suitable for printing movable joints, gears, or bearing parts
• Clear and Sharp Details: M58 3d resin has high molding accuracy, is not easy to overexpose, and can accurately restore the fine details in 3d files
• Mixed with F69/F39/F39T: Tough resin K/M58/M68/G217 can be mixed with F69/F39/F39T resin, which can make the printed parts tougher, more durable, and not brittle for a long time
• Wide Adaptability: Designed for 385~405nm UV LED light source, it is suitable for mainstream LCD/MSLA/DLP resin 3D printers on the market

• The prints are not easily damaged: TH72 prints can withstand accidental accidental drops, and you can significantly bend or even fold prints with a wall thickness of less than 3mm. It is ideal for printing durable figures.
• Long-lasting toughness: TH72 prints will not slowly become brittle over time. After testing, 1 month of summer sun and rain and 8 hours of high temperature drying at 50-60 will not make it lose its toughness and strength, it has good weather resistance.
• Hollowed out prints will not crack: The hollowed out model often crack slowly because the interior cannot be completely cleaned and cannot be post-cured. TH72 will not, allowing you to save more material.
• Small shrinkage and deformation after a long time: Even if it is a slender or thin-walled printed part, its deformation is significantly smaller than other materials after it is fully post-cured and placed for a long time.