Additive Manufacturing Products By STEPPERONLINE

• 5 PCS, High torque Low noise
• Nema 17 stepper motor with step angle 1.8deg
• Holding Torque: 45Ncm(63.74oz.in), 12-24 VDC
• Rated Current/phase: 1.50A & Phase Resistance: 2.3ohms
• Build with 1m Pin Connector

• The ISC04 is a microprocessor embedded, voltage control, miniature stepper motor controller.
• ISC04 can provide 1.5 - 4A adjustable phase current through 12 - 40VDC input voltage.
• The microprocessor of the ISC04 is capable to ramp up the current speed to the desired speed. It is possible to jump to 1250 rpm in 0.3 seconds.
• With the ISC04, the motor speed can be controlled by an analog voltage in two optional ways: an external potentiometer or an external voltage.
• ISC04 can be mounted onto NEMA 17, 23, 24 series stepper motor seamlessly through adapting flanges.

• 3 PCS, High torque Low noise
• Nema 17 stepper motor with step angle 1.8deg
• Holding Torque: 45Ncm(63.74oz.in)
• Rated Current/phase: 1.50A & Phase Resistance: 2.3ohms
• Build with 1m Pin Connector

• High Torque
• 1.9Nm(269oz.in) holding torque
• NEMA 23 bipolar 2.24\"x2.24\"x3.0\" 4-wire
• 1.8 deg. step angle(200 steps/rev)
• Rated current 2.8A & resistance 1.13ohms

• Package in 3PCS
• 65Ncm(92oz.in) holding torque
• NEMA 17 bipolar 1.65\"x1.65\"x2.36\" 4-wire
• 1.8 deg. step angle(200 steps/rev)
• Package include 1pc

• 3 packed, Very High Torque
• 60Ncm holding torque
• NEMA 17 bipolar 1.65\"x1.65\"x2.36\" 4-wire
• 1.8 deg. step angle(200 steps/rev)
• Rated current 2.1A & resistance 1.7ohms

• 3D printer motor with high torque
• 59Ncm(83.6oz.in) holding torque
• NEMA 17 bipolar 1.65\"x1.65\"x1.85\" 4-wire
• Build with 1m Cable and 0.1\" pitch Connector
• Rated current 2.0A & resistance 1.4ohms