Additive Manufacturing Products By Zeberoxyz

• Brand New and Good Qualtiy Products
• Material: Made of good quality metal, fine workmanship, stable performance and high work efficiency, and is an essential part of linear motion
• High Accuracy: Repeat positioning accuracy is ?0.03mm; Load:Maximum horizontal load capacity: 30kg; Maximum vertical load capacity: 15kg. Speed: 0-100mm/min
• Effective stroke: 150mm effective stroke, Total length: 315mm, Ballscrew type: SFU1605 ( diameter: 16mm, pitch of screw: 5mm ) Lead: 5mm (the lead screw can move 5mm in one turn), 4pcs M4 threaded hole on the moving block to fix the workpiece
• Package Content: 1pcs Linear Stage Actuator with NEMA17 Stepper Motor, 1pcs Stepper Motor Cable

• Material: Plate is made of high quality cold rolled sheet material
• Easy To Install: Direct Drive Plate Kit for 3D Printer, Quick assembly, NO need to modify the firmware, with motor extension cable(one end is female and the other is male)
• Advantage: Upgraded Support Plate Compatible with Single Gear and Dual Gear, our product package list is installed with a single gear extruder, of course you can use a dual gear extruder installed on our upgraded Support Plate, both versions are compatible
• Warm Tips: This kit Not Suit for Ender 3 and CR 10, Please note that only applies for Ender5; Widely Used: only for Creality Ender 5 /Ender 5 Pro /Ender 5 Plus 3D Printer
• Package Content: 1kit direct extruder support plate with 4pcs pulleys, 1kit metal single gear extruder structure, 1pcs stepper motor, 1pcs length 60cm motor extension cable(one end is female and the other is male), 1pcs length 100cm motor cable (Both ends are male), 2pcs blue PTFE tube, 4pcs Allen Key, 1pcs Open end Wrench 8mm to 10mm

• Material: Plate is made of high quality Aluminum Alloy sheet material, compact and light,only 83.7g weight, it can move quickly on the X axis, reduce X-axis printhead weight, fine workmanship, long service life
• Function: A direct drive extruder improves extrusion and retraction, It offers precise retraction and better print results, Upgrade direct drive plate kit can be used with 4 types of extruders, compatible with Dual Gear/ Single Gear/ Titan/ BMG Extruder, Our product package list already includes a set of dual gear extruder Kit with Stepper Motor
• Filament: More material options, it easy to print TPU flexible filament
• Package Content: 1Kit Direct Drive Support Aluminum Plate with 4pcs pulleys, 1Kit metal dual gear extruder structure, 1pcs stepper motor, 1pcs length 60cm motor extension cable(one end is female and the other is male), 1pcs length 100cm motor cable (Both ends are male), 2pcs teflon tube, 3pcs cable ties, 4pcs Allen Key, 1pcs Open end Wrench 8mm to 10mm
• Widely Used: Only for Ender 6 3D Printer, Tip: If it is installed on a Titan or BMG extruder, you need to modify the firmware yourself, and you need to change the extruder rotation ratio to 3:1

• Material: This Red Supporting Rod Set Made of High Quality Aluminum alloy; Surface Treatment: anodizing,long service life,fine workmanship
• Easy to Install:The length of a single pull rod is 308mm/12.1Inches,Complete accessories and installation tools,which is convenient for installation and more stable in structure
• Features:Can effectively solve the jitter of the Z axis of the DIY 3D printer with aluminum profile structure and improve the printing effect. Only Applicable to models with upgrading 3D Printer CR-10S Pro/CR-10S Pro V2
• Stability:The two ends are all connected by aluminum alloy fixed blocks to enhance the stability so you can printer super tall prints and not worry about the frame moving
• Package Content: 4 x 308mm/12.1Inches Red Pull Rod, 2 x Tie Rod connector(Top), 2 x Tie Rod connector(Bottom), 4 x Fisheye Bolt M6*35, 4 x M6 Hex Nut, 2 x Tie Bolt M6*35, 4 x Stainless Steel Screw M5*10, 4 x Screw M3*8, 4 x Stainless Steel Screw M5*12, 4 x M5 T Nut, 4 x M6 Spacer, 1 x Tool Kit, 1 x User Manual

• Materials: Good Quality Metal and Plastic, Stable,Sturdy, long service life,fine workmanship
• Install: Already pre-assembled,you don't need to assemble it by yourself
• Suitable for 0.5kg or 1kg and below ABS/PLA 1.75mm 3D printer filament,keeping filaments dry during the printing
• Application Scope: Suit for all type 3D printer, for Ender 3 series, for CR-10 series
• Package Content: 1Kit 3D Printer Filament Holder, 1PCS Dry Storage Box, 4 Packs of desiccant,1PCS thermohygrometer,1PCS Quick connector,1PCS Allen Key
• Reusable desiccant bags and upgraded packaging
• The Filament in the image are only used with the photo scene, the actual shipping products do not contain Filament, please note, thank you
• Note:If you have any questions, please contact us directly and we will help you until you are satisfied

• Material:Plate is made of high quality cold rolled sheet material
• Easy To Install: Direct Drive Plate Kit for 3D Printer, Quick assembly , NO need to modify the firmware, with motor extension cable(one end is female and the other is male)
• Filament:More material options,easy to print TPU flexible filament
• Widely Used: for Creality Ender 3/ CR-10 printers, only suitable for single pulley extruder
• Package Content:1pcs direct drive plate with 3pcs pulleys,1kit metal extruder structure, 1pcs length 60cm motor extension cable(one end is female and the other is male), 1pcs length 100cm motor cable (Both ends are male), 2pcs blue PTFE tube, 1pcs Stepper motor, 1pcs BL-touch Bracket, 2pcs M3x5mm Screw, 4pcs Allen Key, 1pcs Open end Wrench 8mm to 10mm

• Brand New and Good Qualtiy Products
• Material: Made of good quality metal, fine workmanship, stable performance and high work efficiency, and is an essential part of linear motion
• High Accuracy: Repeat positioning accuracy is ?0.03mm; Load:Maximum horizontal load capacity: 30kg; Maximum vertical load capacity: 15kg. Speed: 0-100mm/min
• Effective stroke: 150mm effective stroke, Total length: 315mm, Ballscrew type: SFU1605 ( diameter: 16mm, pitch of screw: 5mm ) Lead: 5mm (the lead screw can move 5mm in one turn), 4pcs M4 threaded hole on the moving block to fix the workpiece
• Package Content: 1pcs Linear Stage Actuator with NEMA17 Stepper Motor, 1pcs Stepper Motor Cable

• 100% brand New and high qualtiy
• Material: Made of high quality metal, fine workmanship, stable performance and high work efficiency, and is an essential part of linear motion
• Accuracy: Repeat positioning accuracy is ?0.05mm Load:Maximum horizontal load capacity: 2.5kg; Maximum vertical load capacity: 1kg.Speed: 0-120mm/min
• Effective stroke: 150mm effective stroke, T6x1:6mm diameter, 1mm lead 1mm pitch (lead screw can move 1mm in one turn)
• Package Content:1PCS T6x1 Linear Stage Actuator with NEMA11 Stepper Motor

• Material: Plate is made of high quality Aluminum Alloy sheet material, compact and light,only 83.7g weight, it can move quickly on the X axis, reduce X-axis printhead weight, fine workmanship, long service life
• Function: A direct drive extruder improves extrusion and retraction, It offers precise retraction and better print results, Upgrade direct drive plate kit can be used with 4 types of extruders, compatible with Dual Gear/ Single Gear/ Titan/ BMG Extruder, Our product package list already includes a set of dual gear extruder Kit with Stepper Motor
• Filament: More material options, it easy to print TPU flexible filament
• Package Content: 1Kit Direct Drive Support Aluminum Plate with 4pcs pulleys, 1Kit metal dual gear extruder structure, 1pcs stepper motor, 1pcs length 60cm motor extension cable(one end is female and the other is male), 1pcs length 100cm motor cable (Both ends are male), 2pcs teflon tube, 3pcs cable ties, 4pcs Allen Key, 1pcs Open end Wrench 8mm to 10mm
• Widely Used: Only for Ender 6 3D Printer, Tip: If it is installed on a Titan or BMG extruder, you need to modify the firmware yourself, and you need to change the extruder rotation ratio to 3:1

• Material: This Red Supporting Rod Set Made of High Quality Aluminum alloy; Surface Treatment: anodizing,long service life,fine workmanship
• Easy to Install:The length of a single pull rod is 308mm/12.1Inches,Complete accessories and installation tools,which is convenient for installation and more stable in structure
• Features:Can effectively solve the jitter of the Z axis of the DIY 3D printer with aluminum profile structure and improve the printing effect. Only Applicable to models with upgrading 3D Printer CR-10S Pro/CR-10S Pro V2
• Stability:The two ends are all connected by aluminum alloy fixed blocks to enhance the stability so you can printer super tall prints and not worry about the frame moving
• Package Content: 4 x 308mm/12.1Inches Red Pull Rod, 2 x Tie Rod connector(Top), 2 x Tie Rod connector(Bottom), 4 x Fisheye Bolt M6*35, 4 x M6 Hex Nut, 2 x Tie Bolt M6*35, 4 x Stainless Steel Screw M5*10, 4 x Screw M3*8, 4 x Stainless Steel Screw M5*12, 4 x M5 T Nut, 4 x M6 Spacer, 1 x Tool Kit, 1 x User Manual

• Material: Plate is made of high quality cold rolled sheet material
• Easy To Install: Direct Drive Plate Kit for 3D Printer, Quick assembly, NO need to modify the firmware, with motor extension cable(one end is female and the other is male)
• Advantage: Upgraded Support Plate Compatible with Single Gear and Dual Gear, our product package list is installed with a single gear extruder, of course you can use a dual gear extruder installed on our upgraded Support Plate, both versions are compatible
• Warm Tips: This kit Not Suit for Ender 3 and CR 10, Please note that only applies for Ender5; Widely Used: only for Creality Ender 5 /Ender 5 Pro /Ender 5 Plus 3D Printer
• Package Content: 1kit direct extruder support plate with 4pcs pulleys, 1kit metal single gear extruder structure, 1pcs stepper motor, 1pcs length 60cm motor extension cable(one end is female and the other is male), 1pcs length 100cm motor cable (Both ends are male), 2pcs blue PTFE tube, 4pcs Allen Key, 1pcs Open end Wrench 8mm to 10mm