Industrial & Scientific Store - Cutting Tools

• Premium High Speed Steel M2
• Normal Diameter: 3/8\"
• Pitch: 24 TPI
• Round Shank With Square Driver for General Application
• Surface Finish: Bright

• Cnc precision ground for fast penetration, accuracy and long life
• Flutes run the length of the cutter for efficient chip clearance, increased drilling productivity and decreased cutter breakage
• Drill holes 3 times faster than twist drills
• Produce reamed-quality burr-free holes and solid slugs
• Made in germany

• It is a precise tool for rough milling, can be used to cutting into work piece for slotting
• The end mill cutter is widely used for machining of d2, steel, dai steel

• Bright finish: Classic M2 High Speed Steel construction with Bright Finish for proven capability and durability.
• Strength & Hardness: Made with HSS M2 steel, Rock wall Hardness Level HRC 62-63.
• Package & Size: 12 Pieces in a plastic bag, Diameter 3/16 inch, Total length 3-1/2 inch, Working length 2-5/16 inch.
• Professional & DIY Use: For use on metal, wood & plastics. Not For Use On Concrete / Masonry / Stainless Steel. Perfect match for workshop or service vehicles.
• 135 Tip & Twist Design: Increases cutting speed with self-centering and prevents walking, clears chips and particles faster.

• Material: These concrete drill bit set made of Tungsten carbide, harder, tougher, and more resistant. Bit tip with braze and hardening process for long life.
• SDS Plus Rotary Drill Bits Widely application: Suitable for Masonry, Cement, Ceramic Tile, Brick, Block, Concrete. etc. These drill bits can use with electric or cordless hammer drills for home decoration, walls perforation, wire switch installation. etc.
• Finish: Optimized brazing and hardening process for long life.
• The special 1/4\" HEX Shoulder for use with standard concrete screw installation sleeves, which eliminate the need for drill adapters
• Size: 5/32 x 7\"?10PCS

• High strength and hardness, durable in use
• Chatter resistant design for superior surface finishes
• Sharp cutting reasonable matched with high strength of cutter
• Made of alloy steels/hardened steels, durable and practical to use
• Application for wood, MDF, HDF, solid wood, epoxy board, PVC, plastic

• The diameter of hinge boring bit is 35mm,with the adjustable cup can make different depth of holes from 15mm to 40mm or more..
• the forstner drill bit with Tungsten alloy carbide,which can make holes on the wood very easy. the tip is very sharp.and make the holes very clean.
• it is packed in a plastic box,and easy for storage.
• It is useful in house decoration and cabinet production,good to make hole and assemble the hinge.
• It can drill all kinds of wood,plastic,plywood etc.

• ??HIGH-QUALITY MATERIALS?It is made of high quality YG6X alloy as raw material. The process of oxynitriding of the cutter head strengthen the drill hardness.
• ??SURFACE ELECTROPHORETIC PAINT PROCESS: Full-grinding and anti-rust treatment, clean and sharp without burrs .The drill bit is more wear-resistant and more durable .Fully automated polishing: Polished CNC is fully automated, each one is unified.
• ??UNIQUE CROSS ANGLE DESIGN :Small incision resistance?feature drilling stably, fast speed, not breaking the border. Opening neat, smooth, no broken edges, no tremor phenomenon, chip easily.
• ?WIDE USAGE: Professional glass and tile drill bits provide smooth and accurate drilling in ceramic tiles, marble, thin iron plate, mirrors and glass. Remember to add Water or coolant when drilling.
• ?NEW DESIGN: U-shaped drain groove, spiral handle design, easy to remove chips during work, smoother drilling. 10 pcs drill bit set with 5mm (3/16 ) sizes: that is 10 x 5mm (3/16 ) fit your different needs.

• Color: Gold | 3/32 Shank Size | Grit: Medium
• PANA NEW Professional Crystal Top Small Barrel Nail Carbide Bit Gold
• [USAGE]- Great for any nail gels, acrylic nails, poly extension nails; shaping, smoothing, polishing and sharpening. Durable usage, can be used for cutting, reshaping and polishing nail surface or sidewalls of the cuticles without damaging the nail.
• [DESIGN]- New Crystal Top Small Barrel Design. Perfect for Beginner and Professional. Made of carbide material head with Gold polish. Strong and quickly to cut or remove hard gel nails and hard materials.
• [FUNCTION]- Low Heat and Less Dust. Overheat resistance. Removes Gel Nail Quickly. Prevent damage to cuticle are. Portable and lightweight. Easy to clean.

• Embedded Tool Holder The lathe tool holder is embedded, which is easier to control than the flat-tail type tool holder, with high precision, and the threaded connection hole is connected more closely, which reduces the machining error
• Processing Range This MT3-FMB22 holder has better cleanness and more stable accuracy, can be used for plate cutting, harden insert used for steel material
• Widely Used The lathe holder extension is a commonly used main accessory for mill CNC machine tools, fixture mill cutter machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools
• High Speed This is an ideal tool kit for heavy cnc milling,which with high speed, rotary and milling feed speeds are 3 times faster than normal milling cutters
• Good Oxidation Resistance This knife handle with new coating technology has good oxidation resistance and high temperature resistance and can be used for a long time--Diameter: 50mm/ 2in--Height: 45mm/ 1.8in--Bore diameter: 22mm/ 0.9in

• The Carving bits kits of Tapered Ball Nose, Spiral, Cone End Mill Cutter
• For CNC,Engraving machine.Carving Wood, Carbon steel, mould steel, alloy steel, inconel, stainless steel, titanium alloy etc
• Long service life, Decreasing the times of changing cutters,Saving production time
• Include 3*carbide end mill ( 2 pc v-groove end mill, 1pcs tapered end mill ), 4*Spiral End Mill (3 pc up cut, 1 pc down cut), 1*ball end mill
• The Carbide End Mill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4\" Collet

• The tooth-shaped design ensures less friction and heat, which enable optimized chip removal, longer service life.
• The design of the Forstner drill center point, the center point of the drill allows precise positioning without slipping.
• Forstner bit made of High-speed steel, the 1/2-Inch drill bit with cylindrical shaft, total length 3-5/8-Inch. Suitable for all drill drivers and drill presses.
• Excellent for drilling in softwood, hardwood, veneer and non-laminated chipboard.
• 100% satisfaction guarantee, our guarantee period is 12 months. If for any reason you are not satisfied, please contact us.

• Round Die: Thread size: M8 X 1; outside diameter (OD): 25mm / 1.0\"; Thickness: 7mm / 0.28\"; accuracy class: 6g. Made of tool steel, hardness and wear-resistance.
• Application: Round dies are suitable for general purpose threading. Can process, correct or clean the external threads. Ideal for maintenance and repair work.
• Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic.
• Easy To Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.
• Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread.

• Corrosion Resistance Bass bridge string saddles adopt zinc alloy material, features high hardness and corrosion resistance, long term.
• Easy to Operate Each saddle contains screws and springs, and the screws and springs have been pressed into the saddle.
• Convenient to Carry The guitar bass bridge screws are small in size, lightweight and convenient to carry.
• Suitable for The saddles have a replacement bridge seat set, suitable for a 5-string bass to fix the bridge, it is the best choice for you.
• Nickel Surface Treatment The saddles are made of thickened zinc alloy material, with nickel surface treatment, durable and stable, anti-rust.