Industrial & Scientific Store - Cutting Tools

• This tooth chisel is the perfect choice for removing and cleaning tiles, thinning, grout and other stubborn adhesives. Ideal tool for foyer floor, kitchen and bathroom renovation by homeowners and professional contractors
• Made of high quality hardened steel alloy. This chisel is designed with optimal geometry specifically for high impact loads, durability and long life
• Optimisation of durability and service life
• Attach them to any SDS rotary hammer with maximum size to easily remove thin and other difficult floor adhesives.
• SDS-Max shank (not compatible with SDS Plus)

• Made of alloy steel-hardened and ground in close tolerances.
• Annular cutter 1/2\" shank tool steel holder (Rota broaches) with lock screw- Accepts/ suit 19 mm shank rota broaches
• This holder can be used in a drill press, lathes, mills or magnetic drilling machines.
• Holder dimensions: Shank 12.5 mm, OAL: 75mm, Holder body diameter: 34 mm,
• ID to hold cutter's shank 19.05 mm, Depth for holding cutter's hank : 25 mm, 2 x grub screw @ 90 degree for clamping of cutter's shank

• Cnc 4-Flute End Mill Adopt Modern Grinding Machine Equipment For High-Precision Grinding. Resists Wear And Offers High Cutting Performance
• Material : Carbide With Tialn Coating For HRC 55 Deg, The Tialn Coating Has Stable Performance And Is Not Easy To Wear Under High Temperature Environment. It Has Higher Hardness And Wear Resistance And Excellent Cutting Performance
• The 35 degree helix angle design Greatly Improves The Production Efficiency, Sharp And Durable, Convenient For Chip Removal
• Applicable materials Include Ordinary Steel, Carbon Steel, Alloy Steel, Hardened Steel, Cast Iron, Etc. The End Milling Cutter Bit Is Suitable For Plane / Side Milling, U-Groove Milling And Other Additive Methods.
• Package Included : 1Piece (12mm) Carbide End Mill

• Consistant Quality
• Value for Money
• Widest Range of Products

• Total length 55 - 69mm, shaft - 6mm(1/4\" Inch), outer diameter of the tip - 10mm,tip blade length 8 - 25mm
• High Quality: Made of high quality heat-treated tungsten carbide, ensuring its hardness can reach to HRC70;
• Multipurpose Tools: Perfect for fine detail work,widely used for metalwork, woodworking, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding,ect;
• Easy to Use: Generally can be used with handheld electric or pneumatic tool drive (can also be used in machine tool, and the speed of the electric/pneumatic tools usually about 6000-50000 RPM;
• Satisfaction: ASNOMY aims to provide high-grade products and customer service to all customers. Any problems, just contact us and our after-sale team will solve your problems ASAP.

• SUITABLE MATERIAL: Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood and other three-dimensional sculpture, surface machining, etc.
• SUPER CHIP REMOVAL: Design of CNC Router Bit is oversized spiral and discharge chips, to prevent sticking knife, raising production efficiency.
• PERFECT CUTTING: The Router Bit makes smooth cutting, non-stick crumbs, not black, increase the speed.
• HIGH QUALITY AND DURABLE: these Engraving bits have sufficient flexural strength and wear resistance, suitable for precision engraving of various materials.
• ENOUGH TO REPLACE: There are 12 pcs three size mill cutter for you to replace and use for a long time.

• This Easy-Setup finger joint router bit can cut finger joints from 3/8\" up to 1-1/2\" thick. The overall length is 3-9/16\" and the shank is 1/2\".
• Create strong finger joints for straight or 90 degree corners for small boxes and crates
• Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge
• For use on table mount router only
• Silver induction brazing for maximum strength and durability

• Range of processing - for cutting/engraving/carving/sculpturing/roughing/milling in materials like MDF, ABS, PVC, acrylic, density board, wood, plywood, rosewood, hardwood etc.
• Dimensions - shank diameter (SD): 1/8\" (3.175mm); cutting edge diameter (CED): 2mm; cutting edge length (CEL)/flute length: 17mm; overall length (OAL): 38.5mm
• High efficiency - these bits own sharp edge which is able for fast engraving that makes high efficiency; durable, high precision and not easy to break; it is smokeless and burr-free while processing
• Perfect cutting - the design of 2 flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal
• Package contents - 10pcs 2-fluted tungsten steel spiral upcut ball nose bits assorted in storage case

• CUT AND REPAIR SCREW THREADS: Tap and dies allow cutting and repair of external or internal threads by hand
• EASY-TO-START THREADING: Plug type, fluted coarse (UNC), and fine (UNF) tap and dies in SAE for easy-to-start hand threading applications
• HIGH STRENGTH ALLOY STEEL: GCr15 alloy steel construction provides superior blade hardness and thread cutting performance
• DURABLE AND ANTI-CORROSIVE: Titanium coating provides more rust resistance and durability than plain finished products
• HARD CASE INCLUDED: ABS hard case for organization, protection and safe storage

• For SDS-PLUS Hammer Drill This ground rod driver is compatible with Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee and all other SDS-Plus ground rods.
• One-Piece Design The SDS PLUS ground rod driver is made of high-quality hardened steel with thickened wall design to resist impact, rust and corrosion. Reusable, ideal for commercial and industrial applications.
• Easy and Quick Suitable for quick and easy grounding work with 5/8\"\" and 3/4\"\" grounding rods. This item measures: 6.8\" (172mm) long, 3/4\" (20mm) inside diameter, 1\" (25mm) outside diameter.
• Save Time For installing items such as ground rods, small fence posts, and small electric fence posts. With this ground rod driver, it saves you time and reduces the risk of finger injuries from sledgehammers.
• Safety With this ground rod driver, you no longer need to use a sledgehammer and planks to install ground rods, small fence posts and small electric fence posts, etc. Ground Rod Driver Compatible with a variety of SDS-PLUS Hammer Drills Almost a must for your safety and your time.

• [Strong & Durable] The ground rod driver is made of forged steel, strong and durable, with high hardness and strength, wear and impact resistant and offer great protection against rust, and can be used for a long time.
• [Optional Type] There are 3 different types of drill bit drivers, including flat drill bit driver, 21mm inner diameter drill bit driver, 19mm inner diameter drill bit driver. All of them are 85mm/3.35 inches in length.
• [Wide Compatibility] Our ground rod driver is compatible with almost all brands of SDS plus system rotary hammers and hammer drills. Please make sure it fits your tool before purchasing.
• [Easy To Install] The drill bit driver is easy to install and disassemble without the assistance of other tools, saving your time and improving working efficiency. The bit driver with a metal wall can withstand greater impact without damage.
• [Practical Tool] With this grounding rod driver, you do not need to use sledgehammers and wooden boards to install grounding rods, small fence posts, and small electric fence posts. It can save your time and give you more safety.

• SDS Plus 0.7\"(18mm) diameter shank bushing tool.
• Hardened steel overall shank, the SDS plus bushing tool is durable and long time service.
• 12 inch overall length, 1-1/2*1-1/2 inch square head.
• Fit with SDS Plus rotary hammer drill.
• SDS plus bushing bit is suitable for concrete/stone/brick wall.

• Our diamond beveling chamfer bit set includes 2 different shaped of diamond router bits with a threaded adapter. They can be used with the adapter to polish the hole.
• With our diamond cone grinder bit and diamond milling drill bit, you can easily create holes of different sizes (0-2 inches) without having to purchase multiple core drills, saving you time and effort.
• Our ceramic tile chamfering tool bits are made of high-quality diamond and sturdy metal materials, ensuring safety, reliability, high hardness, and strength for more effective cleaning and trimming, resulting in smooth and beautiful hole finishes.
• Our milling drill bit is 0.8 inch (20mm) in size, and cone grinding bit measures approx is 2 inch (50 mm) in diameter.
• Our diamond core drill bit set is perfect for enlarging, shaping, and trimming existing holes in ceramics, hard ceramics, granite, and marble, and can also be used to create circular indentations to accommodate pipes or wires.

• Top Quality Made from HRC55 Carbide with AlTiN Coated that is very tough, resists wear and offers high cutting performan;
• AlTiN Coating Titanium aluminum nitride (AlTiN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings;
• Widely Application Nano carbide Mill tools perfect for Hard Materials carbon steels , alloy steels , pre-hardened steels , hardened Steels, cast iron,Titanium Alloy, Graphite, plastic, composite material etc;
• Size Solid Carbide Router Bit with 5/32\"(4mm) Shank and 5/32\"(4mm) Cutting Diameter, 15/32\"(4mm) Cutting Length, 2 inch for Total Length;
• Satisfaction ASNOMY aims to provide high-grade products and customer service to all customers. Any problems, just contact us and our after-sale team will solve your problems ASAP.