Industrial & Scientific Store - Cutting Tools

• Number of Pieces: 3 Tap Dimension Type: Inch Thread Direction: Right Hand Tap Finish: Uncoated Tap Chamfer: Bottoming, Plug, Taper Tap Material: High Speed Steel Item: Tap Set Number of Flutes: 4 Tap Grouping: Tap Set Includes: One Each Taper 4AHX8, Plug 4AHX9, Bottoming 4AKC0 Tap Style: Straight Flute (Hand) Overall Length: 3-19/32\"
• Pitch Diameter Limit: H3 Tap Thread Size: 9/16\"-12 Tap Thread Type: UNC List Number: 5305/5303 Shank Dia.: 0.429\" Standards: Unified and American National Threads Thread Length: 1-21/32\" Country of Origin (subject to change): United States

• 2015
• Roundover Bit
• Industrial Quality
• 1-3/4-inch Cutting Length 1/2-inch shank 2 Flute

• 0.75\" Diameter
• 5 7/8\" Length of Flute
• 9 3/4\" Overall Length
• Not recommended for drilling steels

• Easily enlarges existing holes without damaging the point
• Stay sharp up to 4x longer compared to conventional and other specialty tip design
• Recommended for cast iron, brass, sheet metal, plastic, mild steel, copper, hardened steel
• 3-flats on shank
• Made in the U.S.A

• Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
• Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
• When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
• 3-inches cutting length
• 7/8-inches size

• Shank Type: Taper Shank
• Taper Size: BT40
• Used for layout, set-up, checking heights, depths and setting angles
• Nose Diameter (Decimal Inch): 2.48
• Projection (Decimal Inch): 3.56

• Contains a 3-1/2-inch bevel and radius panel bit and a pair of 1-3/4-inch rail and stile bits
• Anti-kickback design, non-stick orange shield coating
• 2 sinter hip hi-density industrial chrome carbide cutting edges for long-lasting performance
• 1/2-inch shank kitchen set 3-piece bevel radius 1/2 shank

• Spiral Point Tap
• Thread Size #6-32
• UNC
• Overall Length 2 in
• Cobalt

• Insert Style: SDXT
• Insert Size: 130508
• Used for layout, set-up, checking heights, depths and setting angles
• Manufacturer's Grade: PM25C
• Material Grade: C5, C5-C6

• Important Remind: The router bit, core bit and zero tolerance grinding drum's arbor is 5/8\"-11 Thread.
• (a) 1 Piece of 2\" / 50 mm (5/8\"-11 Thread arbor) Diamond Ultra High Segment Core Drill Bit / Hole Saw for concrete granite travertine (5/8\"-11 Thread arbor). core bit color is random: red or blue or silver.
• (b) 1 Piece of 2\" / 50 mm Zero Tolerance Diamond Drum Wheel (5/8\"-11 thread arbor). Do very good job for cutting of the stone, concrete sink hole.
• (c) 1 Piece of F20 (20 mm / 3/4\") Ogee Bullnose for 20 MM HIGH OR THICK CONCRETE STONE Diamond Brazed Router Bit / Profiler for granite concrete travertine (5/8\"-11 Thread arbor).
• (d) 1 Piece of 4\" Velcro Pad Holder (itss arbor is 5/8\"-11 Thread. Velcro Backer's max velocity is 5000 RPM. Please do not use it with high speed grinder / polisher). 7 Pieces of 4\" Diamond Polishing Pad for stone concrete (1 X Grit 50 100 200 400 800 1500 3000), and 1 Piece of 4\" Diamond glaze buffer (it brings mirror like polished result to natural stone granite marble).

• 9/16'' to 1'' HSS Annular Cutters, Cutting Depth 1'', with 3/4'' Weldon Shank.Hole of Pilot Pin=Dia.1/4'', plus 8 pcs of pilot pin
• Cuts holes in steel accurately, quickly & safely
• Large holes can be drilled up to ten times faster than regular drills bits
• Made from tough, high-speed tool steel
• Machine-finish hole-no reaming needed when used with lubricant

• Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
• Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
• 82 degree angle;Application: Countersinks And Deburs Aluminum, Non-Metallics And Plastics
• Straight shank, CNC precision cam ground, M35 cobalt, chatter-free cutting action
• Made in Great Britain

• Perfect Fitment This kit is compatible with DT466 DT530 and International MaxxForce DT9 DT10 1996-2015.
• Simple Operation As the connection between the Hpop hose and cylinder head, this kit helps you efficiently troubleshoot the high pressure oil system at ease.
• Multiple Functions This kit with multiple functions and high integration can be used for running shop air directly to the head for a leak test, running a pump deadhead pressure test, reading pressure while cranking, reading pressure while engine is running. It is precisely manufactured and tested to meet original equipment standards and performance.
• Product Specification 6,000 psi Gauge, 5,800 psi Eaton Weathershield hydraulic hose, Burst rating 23,200 psi.
• Satisfaction Guarantee If you're not satisfied with the kit, simply return for a full refund in 30 days or get a replacement during 1 year warranty via our customer service.

• Set includes straight, rabbeting, profile, chamfer, dovetail bits and more types
• 2 sinterhip hi-density industrial chrome carbide cutting edges for long-lasting performance
• Some bits features ant kickback design for working in a safe way
• 13 piece router bits set 1/4 shank, chamfer straight bit set

• Delivers high quality holes across multiple materials: steel, stainless steel, cast iron, aluminum, and high-temp alloys
• Straight cutting lip reduces chipping on the cutting edge
• Geometry designed for strength and versatility
• High self-centering capability
• Excellent chip control and evacuation