Industrial & Scientific Store - Cutting Tools

• The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results.
• The turn-angle head and the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete.
• As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. It is compatible with rotary hammers with SDS plus holders.
• Diameter (D) mm: 12,00 Working length (L1) mm: 200 Total length (L2) mm: 260 Packaging Content-1

• Widely used for various electrical projects
• Light weight, small size, easy to carry
• Easy install and no driver needed, imported from hongkong

• This Electric Drill Machine is commonly used for drilling holes in various materials such as wood, steel, concrete. It can be used for tasks ranging from simple home repairs to professional construction projects.
• 10mm CHUCK CAPACITY : This Electric Drill has 10mm chuck capacity and helps in assembling the drill bits in to the chuck, and it holds the drill bit
• CHUCK KEY : The chuck key is made up of strong metal which is corrosion and rust free. also helps in tighten or loosen the jaws.
• REVERSE/FORWARD SLIDING KNOB : This Electric drill have reverse/forward sliding knob that allows you to change the direction of rotation.
• LOCK-ON BUTTON : With the LOCK button, you can lock the speed without holding the trigger to reduce fatigue. It helps in continuous drilling.

• The 12\" Flat Bar has a wide prying end for leverage
• This bar has multiple nail pullers and point bevelled ends for efficient nail removal
• Spring steel for strength and durability; Extra wide prying end for leverage and pry surface
• Pointed beveled end for penetration and nail pulling; Applications: Prying , Pulling Nails, Trim Removal, Floor Removal, Lifting
• Limited lifetime warranty offered on the product

• Ergonomically Designed Soft Grip Handle for Fatigue Free Operation
• Reverse/ Forward Switch for ease of Operation
• Variable Speed Switch for Screw Driving
• Auxiliary Handle for Straight Drilling
• For Multi Surface Drilling can be used on materials Like wall, wood & metals etc,

• Carbide Tips for Long Service Life
• 4 Flute Design allows Faster Cleaning out of Debris
• Used for heavy applications
• Tip is designed in the form of Plus sign for Fast Drilling

• Standard for universal screwdriver bits
• Size 45 mm
• PH2/PH2

• It has a 1/4-inch hex shank, and is intended for use with drill driversThe 1/4-inch Hex-Shank Extension for Self-Cut Speed spade bits delivers extended reach when drilling
• It offers two different extension lengths at 152 mm and 305 mm
• This extension is ideal for all applications with spade bits where extra length is needed
• Length mm: 305 Packaging Content-1

• 4 Wings CNC Router bit: Shank: 1/4\"; Cut Diameter: 1\"(25.48mm); Cut Length: 1/4\"(6.35mm).
• The sharp carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating.Router bit can withstand some heavy duty use and the test of time
• This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving.
• Suitable for woods, mdf, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials.
• If youre not 100% satisfied with your purchase, we promise to offer you a prompt and full refund or ship you a replacement, so you can buy with peace of mind.

• Rotary multi-tool, 12V, 5,000-35,000rpm, 0.44kg
• Fastening clamp diameter: 3.2mm
• Speed regulator
• Professional 12 V system; compact performance; maximum freedom; all of our batteries are compatible with new and existing Bosch Professional tools in the same voltage class

• The edge banding machine is made of high quality PVC material, solid and not easy to aging, non-slip top surface is easy to operate and durable to use.
• Fit for edge banding thickness below 0.5mm, width between 15-40mm.
• Comes with two sets of blades, a set of original, a set of replacement, more durable and lasting for long time use.
• Applicable to a variety of materials, such as flexible melamine paper, wood, plastic, PVC etc.
• Wide application, suitable for panel type furniture, cabinet making, decoration and other industries, really an essential tool for woodworking.

• Easily Cuts through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too.
• Extremely heat resistant; must be used and operated at 1500 RPM or greater for maximum efficiency.
• Extremely Durable-Lasts Longer
• Hardened alloy, measuring hardness up to 67, for much faster cutting and extra longer life span, with up to six times when compared with an average HSS drill bit.
• It is a pack of 10 pieces.

• Brad-Point Design can penetrate surface quickly because of the sharp point on the tip. This allows the user to pinpoint the mark with the drill bit. Better in CENTERING and NO SKID.
• High Speed Steel 4241 for fast cutting against tough wood material. High hardness, offer superior cutting power and durable.
• 1/4-inch Hex Shanks are compatible with both standard and quick change Chuck Drivers, providing versatility in drilling needs.
• Drill bits measures in at 1,82 inches( ranges 2.32 inches) which allows it to reach an awkward position well and works great with right-angled drill.
• The 6pcs drill bit set includes a Hex Shank Holder and the following bit sizes: 3/32 , 1/8 , 3/16 , 1/4 , 5/16 and 3/8 drill bits.

• The SDS plus-1 Drill Bit is optimised for drilling concreteIt is compatible with all rotary hammers with SDS plus holder
• Its 2-cutter Tungsten Carbide plate makes the bit extra tough while its 2-flute U-shape flute design provides effective dust removal and standard lifetime
• The bit is intended for use on masonry and concrete
• Diameter (D) mm: 25,00