Indian Construction Industry

Cutting Tools

Industrial & Scientific Store

Contact
For Trade

Buy Online Cutting Tools from IndianConstructionIndustry.Com in Association with Amazon India



Industrial & Scientific Store - Cutting Tools

Price: Price32894 Mrp Price52213
You Save: -37%
by OSG
Price: Price32170 Mrp Price51064
You Save: -37%
WIDIA GTD VTSFT9518 VariTap VTSFT95 Multipurpose Tap, Semi Bottom Chamfer, Right Hand Cut, 4 Flutes, M18 X 1.5, HSS-E, TiCN Coating - Product Features
  • Spiral-flute geometry optimized to provide efficient chip ejection in blind holes
  • Manufactured from high-vanadium HSS-E to provide long and consistent tool life
  • Geometry designed to allow tapping of a wide variety of ductile materials: carbon and alloy steels, stainless steels, ductile iron, and cast aluminum
  • Ideal for customers who have a variety of materials to machine
  • Form C Semi-Bottoming Chamfer, Metric, DIN Length ANSI Shank
 
Cle-Line C65427 Carbon Steel Round Adjustable Die, 1-1/8-12 UNF - Product Features
  • Carbon steel substrate
  • Short chamfer on both sides of die to extend tool life
  • Adjustable for wear and size
  • Cut external threads when held in a die stock
  • Can be used for close to shoulder work
  • Made in the USA
 
Spiral Point Tap,#10-24,HSS-E -6 pack - Product Features
  • Spiral Point Tap
  • Thread Size #10-24
  • UNC
  • Overall Length 2 11/32 in
  • HSS-E
 
1 1/8" Aircraft Counterbore, Carbide Tipped, (Reduced Shank Counterbore), 3/8" Shank Diameter, 3 Flutes, 2 3/4" OAL, (1.125" Diameter, 1-1/8), 52236, USA Made - Product Features
  • For counterboring and spotfacing in applications where machine requires a smaller shank
  • 1/64\" Corner Radius, Tool Diameter Tolerance: +.001\"/-0\". Shank Diameter Tolerance: +0\"/-.001\"
  • Pilot Hole Diameter:3/16, If using a pilot this is the shank diameter of the pilot you should choose
  • Minimum Cut Diameter: .219\" Because there is a pilot hole the tool will not cut below this diameter.
  • Set screw to hold a pilot or drill bit in place (if you are using a pilot or drill bit)
 
F&D Tool Company 17009-HM1011 Hollow Mills, 11/32" Hole Diameter, 3/4" Shank Diameter, 1.5" Overall Length, 4 Number of Teeth - Product Features
  • Hollow Mills
  • Hole Diameter: 11/32 - Shank Diameter: 3/4 - Overall Length: 1 1/2 - # of Teeth: 4
  • Available with either 3 or 4 teeth, undercut with a 10 degree rake for milling steel, in diameters from 5/8\" to 1-1/4\" and hole diameters from 3/32\" to 1\"
  • Made in USA
 
WIDIA 6126847 Duolock Duo Lock Inch End Mill 0.6053 Inch Dia, 0.9375 Inch Max Depth, 2.2126" Length, Empty Duo-Lock Carbide AlTiN 4 Flutes 49C9160DL16 - Product Features
  • WIDIA 6126847 Duolock Duo Lock Inch End Mill 0.6053 Inch Dia, 0.9375 Inch Max Depth, 2.2126\" Length, EMPTY DUO-LOCK Carbide AlTiN 4 Flutes
  • ENDMILL D-L HP RUF BN 4F 5/8XDL16X15/16
  • When you buy WIDIA products, you are buying the ultimate in performance and tool life.
 
Drill America 1-1/2" Reduced Shank Cobalt Drill Bit with 1/2" Shank, DWDCO Series - Product Features
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Manufactured to National Aerospace standard 907
 
MAKITA DHR241RFE 18V Cordless Combination Hammer SDS Plus with 2x BL1830 3Ah Battery and Charger, 1 Year Warranty - Product Features
  • 0 1,100 RPM and 0 4,000 BPM for Demanding Applications
  • Makita-built variable speed motor delivers 0-1,100 RPM and 0-4,000 BPM
  • Synchronized RPM and BPM prevents overlapping impacts for up to 50% more efficient drilling
  • 3-mode operation: ?rotation only?, ?hammering with rotation or ?hammering only?
  • Ergonomic D-shaped handle with rubberized soft grip for increased comfort and control. Job site tested shock absorbent handle protects the battery housing for durability
  • Built-in clutch reduces gear damage by disengaging gears if bit binds. One-touch sliding chuck for quick bit changes
  • Large 2-finger variable speed trigger for added convenience
  • Chisel rotates 360 with 40 different positions
  • Rubber joint construction suppresses transmission of vibration to battery, minimizing battery failures due to terminal breakage or poor electrical contact. Rubber housing bumper protects mode selector switch and gear housing from damage. Ergonomic soft rubber grip design for vibration absorption and comfortable operation. Side grip with elastomer soft grip
  • Depth gauge for increased drilling consistency. Variable speed trigger allows operator to adjust speed based on materials or application. Conveniently located push button for rotation reverse. Electric brake for maximum productivity and increased operator safety. Battery protection circuit protects against overloading, over-discharging and over-heating. Externally accessible brushes for easy serviceability
 
Metal HRC55 2 Flutes Carbide Ball Nose End Mills Tungsten Steel Cutter CNC Router Bit Milling Cutter Tool R0.5 R1 R2 R3 R4 R5 R6 ( Cutting Edge Diameter : R10X20DX100 2F , Dimensions : 1PCS ) - Product Features
  • Type: Ball Nose End Mills
  • Material: Carbide
  • Coating: TiAIN
  • Diameter: 1,2,3,4,5,6,8,10,12
  • Overall Length: 50,75,100
 
XHTLLO 6-Inch Diameter 28-Inch Length Auger Drill Bit, Electric Ice Fishing Auger Drill Bit with Floating Device, Carbide Blade, Ice Drill Auger for Ice Fishing, Universal Adapter - Product Features
  • STURDY CONSTRUCTION: Constructed from aluminum alloy and nylon, this ice auger boasts exceptional tensile strength, impact resistance, and rust resistance, all while remaining lightweight for easy handling.
  • CARBIDE BLADE: Featuring a carbide blade, this ice drill effortlessly cuts through ice layers with accuracy and durability. The protective device prevents damage to the blade, ensuring longlasting performance.
  • FLOATING DEVICE: Equipped with a floating device, this ice auger ensures peace of mind during ope ion. If the drill rod becomes detached, it will safely float on the water's surface, preventing loss.
  • 28 INCH LENGTH: With a length of 28 inches and a 6-inch diameter, this ice drill bit is ideal for deep water bodies and thick ice layers, making it suitable for a wide range of ice fishing scenarios.
  • UNIVERSAL ADAPTER: Compatible with various electric drilling machines, this auger drill bit comes with a universal adapter for seamless attachment, providing versatility for different drilling needs.
 
Whiteside Router Bits RD7200T Three Flute Spiral Bit with Down Cut Solid Carbide 3/4-Inch Cutting Diameter and 2-Inch Cutting Length - Product Features
  • RD7200T
  • Down Cut Triple Flute Spiral
  • Industrial Quality
 
STM Premium 117074 1/4" 48" O.A.L. Extra Length H.S.S. Drill - Product Features
  • Drill Bit Size (Inch): 1/4\"
  • Drill Bit Material: High Speed Steel
  • Used for layout, set-up, checking heights, depths and setting angles
  • Drill Bit Finish/Coating: Black Oxide
  • Overall Length (Inch): 48\"
 
Router Bits Set 1/2 Shank - BAIDETS 70PCS Router Bit 1/2 Inch Shank Kit T Shape for Carpenter Woodworking - Product Features
  • BAIDETS ROUTER BITS
 
 
If you have a business establishment in india,

Contact us

to list your business related to any construction categories.
 
Construction Events
To Know more about the events about Air Conditioners, Basements, Bathrooms, Bedrooms, Cabinets, Decorating, Design Plans, Doors, Electrical Lightings, Flooring, Home Security, Kitchen, Landscape, Painting, Plumbing, Fixtures and many more..
 
 
Facebook Twitter Instagram LinkedIn
© 2007 - IndianConstructionIndustry.com. All Rights Reserved
Home  |  Overview  |  Advertise  |  Link to us  |  About us  |  Contact us  |  Sitemap  |  Privacy Statement