Cutting Tools
Industrial & Scientific Store
Buy Online Cutting Tools from IndianConstructionIndustry.Com in Association with Amazon India
Industrial & Scientific Store - Cutting Tools
Price: 
29483
42119
29483
42119
You Save: -30%
Micro 100 RR-125-12X Right Hand Retaining Ring Grooving Tool, Solid Carbide, AlTiN Coated, 0.125/0.127" Groove Width, 0.150" Projection, 0.500" Minimum Bore Diameter, 0.750" Maximum Bore Depth, 0.500" Shank Diameter, 3" Overall Length - Product Features
- Retaining Ring Grooving Tools
- Lockdown flat automatically locates tool on center
- Left Hand and Metric Sizes Available too
- Made in USA
- Coated AlTiN for extended tool life
Micro 100 RR-093-8X Grooving Tool - Retaining Ring, 3/32" Width.150" Proj, 1/2" Min Bore Dia, 1/2" Max Bore Depth, 1/4" Offset, 1/2" Shank Dia, 3" OAL, AlTiN - Product Features
- Designed for generating retaining ring grooves
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Sharp corner profile
- Lockdown flat automatically locates tool on center
- Coating options provide added lubricity and increased wear resistance in difficult to machine materials
Micro 100 RR-093-24X Right Hand Retaining Ring Grooving Tool, Solid Carbide, AlTiN Coated, 0.093/0.094" Groove Width, 0.150" Projection, 0.500" Minimum Bore Diameter, 1.500" Maximum Bore Depth, 0.500" Shank Diameter, 3" Overall Length - Product Features
- Retaining Ring Grooving Tools
- Lockdown flat automatically locates tool on center
- Left Hand and Metric Sizes Available too
- Made in USA
- Coated AlTiN for extended tool life
Micro 100 RR-093-20X Grooving Tool - Retaining Ring, 3/32" Width.150" Proj, 1/2" Min Bore Dia, 1-1/4" Max Bore Depth, 1/4" Offset, 1/2" Shank Dia, 3" OAL, AlTiN - Product Features
- Designed for generating retaining ring grooves
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Sharp corner profile
- Lockdown flat automatically locates tool on center
- Coating options provide added lubricity and increased wear resistance in difficult to machine materials
Micro 100 RR-093-12X Grooving Tool - Retaining Ring, 3/32" Width.150" Proj, 1/2" Min Bore Dia, 3/4" Max Bore Depth, 1/4" Offset, 1/2" Shank Dia, 3" OAL, AlTiN - Product Features
- Designed for generating retaining ring grooves
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Sharp corner profile
- Lockdown flat automatically locates tool on center
- Coating options provide added lubricity and increased wear resistance in difficult to machine materials
Cleveland C70368 29 Piece High Speed Steel Heavy-Duty Screw Machine Length Drill Bit Set, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16" to 1/2" Size - Product Features
- Set of 29 heavy duty screw machine length drill bits includes inch sizes 1/16\" to 1/2\" in 1/64\" increments
- High-speed steel (HSS) provides hardness for wear resistance
- Uncoated (bright) finish has no additional surface treatment or coating
- Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
- Meets ANSI specifications
- Made in the USA
YG-1 T5 Series High Vanadium HSS Spiral Flute Combo Tap, TiCN Coated, Round Shank with Square End, Modified Bottoming Chamfer, M22-1.5 Thread Size, D6 Tolerance - Product Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.551-inches thread length
Viking Drill and Tool 57990 SP-18TDM Type 21-UB Spiral Point Plug Style Magnum Super Premium Tap/Drill Bits Set - Product Features
- 18 pc. Set Premium Metric Tap and Dies Index High Speed Steel Spiral Point
- Spiral Point Plug Taps & HSS Drills
- Contains: HSS Spiral Point Taps & Drills
- Includes corresponding drill & tap
- Spiral Point Plug Style Magnum Super Premium Tap/Drill Set
Alfa Tools RS52449 1-13/16" High-Speed Steel Silver and Deming Drill with 3/4" Reduced Shank Black Oxide Finish - Product Features
- Black Oxide finished for general purpose drilling in a wide range of materials, equipment and operating conditions
- Not for enlarging existing holes
- 1-13/16\" Diameter ( 1.8125\"), 6\" Overall length
- 118 Degree Point, 3/4\" Reduced Shank, Right Hand Spiral
- 1 per Tube
Sowa Tool 145993 SCACL 08-3K External Turning Toolholder - Product Features
- Hand of Holder: Left Hand
- Toolholder Style: SCACL
- Used for layout, set-up, checking heights, depths and setting angles
- Shank Width (Decimal Inch): 0.5
- Shank Height (Decimal Inch): 0.5
Mitsubishi PCLNR2525M12 Bite Holder - Product Features
- Made in Japan
- Compatible Chips: CN?1204
- Clamp Type: Lever lock
Drill America 1/2" x 3" x 1" Hole Convex Cutter, DWC Series - Product Features
- Package Dimensions: 6.0\" (L) x 4.0\" (W) x 4.0\" (H)
- Package Quantity: 1
- Product Type: Cutting Tools
- Country Of Origin: United States
Micro 100 DC-5 Combined Drill & Countersink, 118 Point Angle, 60 Included Angle, 3/16" Dia, 0.188" Flute Length, 7/16" Shank Dia, 2-3/4" OAL, Uncoated - Product Features
- Designed for predrilling 60 live center holes
- Can be utilized for countersinking and spot drilling
- Double-ended for quicker tool changes
- Solid carbide
- CNC ground in the USA
3 Keego 12mm TCT Annular Cutter Depth Cut 35mm (Silver) Pack of 10 - Product Features
- Material : Tungsten Carbide Tipped
- Cut Size : 12mm
- Depth of Cut : 35mm
- Cutting of slanted, elongated and edge holes is possible
- Annular part does all the work so small cutting resistance reduces drilling time
3 Keego 13mm TCT Annular Cutter Depth Cut 35mm (Silver) Pack of 10 - Product Features
- Material : Tungsten Carbide Tipped
- Cut Size : 13mm
- Depth of Cut : 35mm
- Cutting of slanted, elongated and edge holes is possible
- Annular part does all the work so small cutting resistance reduces drilling time
3 Keego 14mm TCT Annular Cutter Depth Cut 35mm (Silver) Pack of 10 - Product Features
- Material : Tungsten Carbide Tipped
- Cut Size : 14mm
- Depth of Cut : 35mm
- Cutting of slanted, elongated and edge holes is possible
- Annular part does all the work so small cutting resistance reduces drilling time
If you have a business establishment in india,
Contact us
to list your business related to any construction categories.Browse by Topic
Construction Events
To Know more about the events about Air Conditioners, Basements, Bathrooms, Bedrooms, Cabinets, Decorating, Design Plans, Doors, Electrical Lightings, Flooring, Home Security, Kitchen, Landscape, Painting, Plumbing, Fixtures and many more..
© 2007 - IndianConstructionIndustry.com. All Rights Reserved