Industrial & Scientific Store - Cutting Tools

• Designed for generating retaning ring grooves in bores .180\" and larger
• Polished split face for improved edge retention and chip evacuation while reducing galling
• Coolant fed enabled shank design
• Sharp corner profile
• Proprietary Micro-Quik quick change system maximizes productivity through reliable accuracy and locational repeatability

• 4 cutting edges, 6-5/16-inch overall length
• Max Suggested RPM: 150 on hardwood and 200 on softwood
• Made of alloyed steel, long-lasting cutting performance
• 2-inch plug cutter 5/8-inch shank soft hardwood

• Dia. of cut: 1-1/2''. Cutting Depth: 2''. 2081-2029+ 1 pc Pilot Pin 1/4\"x4\" IBC0-0090
• Cuts holes in steel accurately, quickly & safely
• Large holes can be drilled up to ten times faster than regular drills bits
• Make overlapping holes, slotting holes and edge cuts. Machine-finish hole-no reaming needed when used with lubricant
• Made from tough, high-speed tool steel - more durable than carbide-tipped cutters

• Vacuum dry/wet brazed diamond drilling bits Core bits with 5/8-11
• Specification?20mm/1PCS;35mm/1PCS;40mm/1PCS;45mm/1PCS;50mm/1PCS;68mm/1PCS
• Applicable to granite, marble, stone brick, ceramic tile, etc.
• Fast and Smooth drilling ,Long lifetime,Less Chipping
• Aluminium Portable Suitcase included. For easy carry and storage and protect of the core bits.

• Dimensions: 2-1/2? x 20? x 24?, Shank: SDS MAX
• 11 aggressive carbide cutting teeth provide maximum chip-out for fast drilling with minimal stop time
• Works with all SDS MAX sized impact rotary hammers; Bosch, Dewalt, Hitachi, Hilti, Makita, Milwaukee, etc
• Durable one-piece design from high quality hardened steel provides long lasting construction. Industrial grade
• Great large diameter core bit to quickly punch though concrete

• Set of 60 short length drill bits includes one each of wire gauge sizes #60 through #1
• High-speed steel (HSS) provides hardness for wear resistance
• Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials
• Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
• Extra thick web for increased strength and rigidity compared to standard drill bits
• Made in the USA

• Solid negative ball stops with 15 degrees spacing fast & easy set-ups.; Can be used for grinding 2-3-4-6-8 and 12 flute end mills
• This fixture takes 5C round collets for grinding end mill 1/16\" ~ 1-1/8\" .Clearance & relief angels are built into the base
• Shell mills can easily be held with Straight Shank arbors
• Clearance & relief angels are built into the base

• Double ended \"T\" style cut-off tool that is parallel ground to help achieve a straighter cut
• Tops are hollow ground to help curl the chip to center for better evacuation
• Additional V-groove ground into the top of the tool forces the chip into a \" W\" form to pull the chip to center resulting in better surface finish and chip evacuation
• Hardened and precision ground steel blades
• Solid carbide tipped with zinc coated hardened steel shank

• Ideal For: To score the coating on bilaminated panels.
• Machine Use: Panel Saw
• Materials: Bilaminated chipboard or MDF

• Good Tool :This gear milling cutter is a special cutting tool specially designed for milling gears.
• Package Quantity :There are a total of 8 sets of gear cutting tools to suit different numbers of teeth.
• Features :The size and proportion are uniform to provide a good cutting range and sufficient rigidity.
• High quality :This gear milling cutter is made of high-speed steel, strong and
• Good performance :The gear cutter has great workmanship, replacement for the old or damaged one.

• Cutting Diameter D: 1\". Shank d1: 1\". OAL: 3-1/2\". No of Insert: 4
• Radial rake angle: -10Degree / Axial rake angle: +7Degree
• All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, case irons and aluminum alloys.
• Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth Uses APKT / APHW / APKR_APht / APMT insert (sold separately)
• Includes 4 pcs APKT11T308 carbide inserts

• Contains Kodiak Cutting Tools brand premium quality USA made ALTiN coated solid carbide end mills
• 2 flute single stub length end mills are center cutting
• Stub length end mills for extra rigidity
• Fitted wood block stand included but each size comes in a plastic tube
• Contains 1pc each 1/8, 3/16, 1/4, 5/16, 3/8 and 1/2

• Unique design allows you to use both sides for threading cuts
• Supplied with a fully adjustable carbide chip breaker and carbide shims
• Two triangular carbide inserts are included
• Interchangeable with Aloris and Dorian AXA series
• Replacement inserts are part # 6004-9031

• Carbide Tipped

• Diameter (D) 2-1/4
• Radius (R) 3/8
• Cutting height (B) 15/16
• Shank (D) 1/2
• Overall length (L) 2-7/8