Industrial & Scientific Store - Cutting Tools

• Diablo made Dura-Carbide withstands impact and high heat applications, dramatically extending life versus standard hammer bits
• Precision Tip delivers stability and accuracy required for fast, precise holes
• Tri-Metal Diffusion Bonding provides heat resistance and prevents breakage of the full-carbide heat for maximum life and productivity
• Optimized four-flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability

• 2 Boring Head With R8 Shank.Head size: 2.Boring bar Hole: 1/2
• Center Distance bt 2 bottom hole: 0.60
• A micrometer lead screw provides 0.0001 direct reading accuracy and ease of adjusting
• Cross Hole Dia: 1/2.Maximum Offset: 5/8.Thread: 1.5-18.Graduations: 0.001/0-50
• Packing including?1pcs 2 Boring Head, 1pcs R8 Shank, 9pcs 1/2 Carbide Boring Bar,3pcs Allen Wrench

• Includes both 10pc- 2 flute and 10pc - 4 flute end mills
• Sizes: 3/16\", 1/4\", 5/16\", 3/8\", 7/16\" (3/8\" shank); 1/2\", 9/16\" (1/2\" shank); 5/8\", 11/16\" (5/8\" shank); 3/4\"(3/4\" shank)
• Made of M2 titanium nitride-coated high speed steel Mill, Center cutting capabilities!
• All in a custom wooden case - approx. dimension: 10-1/4''L x 3-1/4''W x 4-1/2''H

• Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
• Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
• Round shanks allow use with a wide variety of toolholding systems
• When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
• Manufactured to National Aerospace standard 907

• Made of 20CrMnTi alloy steel
• Electrolysis nickel coating
• Balanced to 18, 000 RPM
• Tolerance is 0. 0003\" Maximum
• Superior finish and craftsmanship

• Set of 26 short length drill bits includes one each of letter sizes A through Z
• High-speed steel (HSS) provides hardness for wear resistance
• Uncoated (bright) finish is an untreated surface that can be used on a range of materials, especially soft metals
• 118-degree conventional point for a range of drilling applications
• Short length drill bits have the strength and rigidity required for heavy-feed rate applications
• Made in the USA

• Head size: 2In; Boring bar Hole: 1/2In; Cross Hole Dia: 1/2In; Maximum Offset: 5/8In
• The use of alloy steel has high strength and toughness, good hardenability, no obvious temper brittleness, and high resistance to multiple impacts after quenching and tempering
• A micrometer lead screw provides 0.0001In direct reading accuracy and ease of adjusting, Double bar holder permits a greater boring range with out an extreme offset condition
• A portable plastic tool box provides protection for boring head, bars and accessories, keep them clean and tidy. Its convenient for user to carry
• Packing including: 1 x 2In Boring Head, 1x R8 Shank, 9 x 1/2In Carbide Boring Bar, 3 x Allen Wrench

• 1898 29 Piece set 1/16-1/2 x 64
• Set range: 1/16-inch - 1/2-inch
• Cle-Line is a familiar name to users of quality cutting tools
• Cle-Line cutting tools have been manufactured for decades specifically for the construction, maintenance, repair, operating and industrial markets
• Made in the USA

• High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
• Round shanks allow use with a wide variety of toolholding systems
• When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
• Set includes 1/16 inches - 3/8 inches drill bits
• Made in the USA

• Size: 1-1/16\", Flute Length: 5\", Overall Length: 7\", Hex Shank Size: 1-5/8\"
• The revolutionary new H.S.S. reamer has a machined hex shank for use in electric or pneumatic Impact Wrenches. The hex shank has strong magnetic, which is convenient for better matching with the socket.
• This reamer is designed for aligning and enlarging existing holes that are overlapping, or smaller than the required diameter. Simply fit one of our reamers into the specified socket size on your Impact wrench and quickly and simply enlarge the existing hole to the desired size.
• For portable pneumatic tools, short lengths enable use in limited access areas. The shank diameter for each reamer matches the socket size for the bolt which will be driven through the newly reamed hole.

• #30/40 diamond grit for drilling soft brick, soft masonry, concrete block
• Diameter: 2-1/2 inch - Pilot Bit Includedes
• Thread: 5/8\"-11 threaded
• Drilling depth: 9.5\"
• High diamond concentration and quality guarantee longer coring life, solid poured concrete Not commended

• Rapid Material Removal: Their hybrid performance removes material at an exceptional rate while maintaining surface quality ready for final finishing.
• Easy to Control: The Rotary Burrs can easily cut with or against the grain with incredibly smooth cutting action. The 1/4\" diameter shaft burrs are great for intricate details and small areas. **Must use with 1/4\" collet or adjustable chuck**
• Versatile: Easily shape, contour, relieve, notch flatten, trim, hollow, or adjust a wide variety of materials including wood, fiberglass, foam, rubber, plastic, drywall, composites, and soft stone. NOTE: Not for use on metals, ceramics or hard stones.
• Incredibly Durable: Featuring Tungsten-Carbide abrasive, 'structured tooth' technology. Outlasts 100X conventional abrasives. Very resistant to loading, they can easily be cleaned with a soft-wire brush or burned with a torch, the heat won't harm the teeth!
• Made in the USA: Kutzall Tools have been handcrafted for over 60 years. Their dedication to quality has made them the tools of choice amongst woodworkers and artisans worldwide.