Cutting Tools By BDS Maschinen

• The made in Germany BDS Premium Tapping Chuck with Friction Clutch (GSS) for blind hole tapping is a specialized tool used in machining to facilitate the process of tapping threads into blind holes. The GSS quick change tapping insert with friction clutch is used blind hole tapping as well as for through hole tapping.
• ALIGNMENT AND DEPTH CONTROL: When tapping blind holes, precise alignment and depth control are crucial to ensure that the threads are cut accurately. BDS Premium Tapping Chuck with Friction Clutch (GSS) are designed for blind hole tapping often have features that allow for better alignment of the tap with the hole and accurate control of the tapping depth
• CHIP EVACUATION: Since the hole is blind, chips (metal shavings) generated during the tapping process can get trapped in the hole. BDS Premium Tapping Chuck with Friction Clutch (GSS) for blind hole tapping might incorporate mechanisms to help facilitate chip evacuation, preventing chips from interfering with the tapping process.
• The GSS blind hole tapping collets is equipped with a friction clutch which once the tap head reached the bottom of the blind hole, the friction clutch of the quick change insert will get activated and the tap will stop to penetrate more. Thus, the tap does not break.
• The GSS collets for bling hole tapping are used in combination with GSW quick change drill chuck. The GSS quick change inserts for tapping are available from M5 to M24 threading size.

• 50 mm Diameter Core Drilling. 55 mm Cutting Depth Capacity.
• Morse Taper 2 machine. Twist drilling up to 18 mm diameter.
• 1150 Watt Powerful German Tech Motor.
• Two Speed Gearbox. 250 RPM and 450 RPM.
• 13 Kg. Weight. 160 mm Stroke. Metal Carry Case.
• 6 Months International Warranty.
• Designed in Germany at our headquarters in M?nchengladbach, NRW, Germany.
• MT 2 Industrial Arbor with 19 mm Weldon Shank.
• 160 mm Stroke. Power Magnet. Robust Sliding System.

• Equipped with Internal Lubrication System.
• Morse Taper 3 Industrial Arbout (Tool Holder) For Annular Cutter With 19 mm Weldon Shank.
• Suitable for annular cutters from 12 to 60 mm diameter only.
• Ideal for conventinal drilling machines and magnetic drilling machines.
• Importerd from Germany.

• KEYLESS Drill Chuck for annular core cutters with 19 mm Weldon Shank
• For Morse Taper 2 equipped magnetic drilling machines or conventional drilling machines
• Ideal for annular cutters from 12 to 60 mm diameter
• The KEYLESS Drill Chuck reduces cutter breackage
• Provides internal lubrication for annular cutters

• MobilCLAMP is a clamp to convert a magnetic drilling machine into a pillar type drilling machine to help drill small parts
• This is NOT a magnetic drilling machine. This product is a Clamping Device to be used with a Wise and a Magnetic Drilling Machine.
• Working table for a magnetic drilling machine of all brands.
• Works with all brands of magnetic drilling machines.
• Buy Wise separately of any brand. Clamp can not be used without a Wise.

• The ejector pin or also called as the pilot pin has 3 major functions:
• Centering: The ejector pin helps to position the drilling machine and drilling tool to take the center of the hole. Once the tip of pilot pin matches the center mark made on the material to be drilled, its considered that the cutting tool is now centered correctly.
• Lubrication: The ejector pin while drilling is pushed up inside the machine arbor, which activates the flow of coolant (lubricant) from inside the annular cutter. By means of the automatic internal lubrication, cutting oil is supplied via the ejector pin to the annular cutter in just the right quantity.
• Ejecting: In the final stage, the ejector pin, pre-stressed by means of a spring, pushes the core out of the drill hole.
• Ideal for all types and brands of annular cutters

• Made in Germany cutting paste ideal for tapping tools and drilling tools
• Suitable for Taps, Annular Cutters, Twist Drill Bits, Etc.
• Recomended for High Alloy Steel, HARDOX, Stainless Steel, Heat-Resistant Steel, Rail Tracks, etc.
• Quanity: 1 Kg.
• Made in Germany

• Cutting Paste Tube 85 Grams
• Ideal For Drillling, tapping, Countersink, reaming, etc.
• Icreases Tool Life and Makes Cutting Faster.
• Made in Germany
• Recomended for High Alloy Steel, HARDOX, Stainless Steel, Heat-Resistant Steel, Rail Tracks, etc.