Cutting Tools By HHIP

• Straight flute reamers should be used in thru-hole applications only
• Blades are adjusted by loosening one nut and tightening the other
• Reamer expands to the next size
• Adjustable blades give the operator the ability to handle multiple hole sizes with a single tool
• Square end allows the user to turn the reamer by hand with an adjustable wrench or straight handle tap wrench

• Boring Bar Style 24-4; Shank 1-1/2; Minimum Bore (Inch) 1.78; Length 14
• Lock Pin NL-0614; Hex Wrench 2.5mm; Shim T-2203B; Use Insert TN..-43.; Hex Wrench 4mm
• Uses TNMG, TNMM, TNMA Inserts Clamp CL-12; Clamp Screw XNS0829
• 0-Degree Lead Angle
• Clamp CL-12; Clamp Screw XNS0829

• Broach Size 3/8; Broach Length 9-3/8; Pilot Diameter 25/64; Drill Size (Inch) 25/64
• Length of Cut Minimum 3/8; Length of Cut Maximim 1-1/4
• Broach is tapered and Ground with bright finishing. Tolerance .3755.3765
• High speed steel Used for cutting square shaped hole in round pilot holes; Heavy Duty
• Tolerance .3755.3765

• Product Type :Cutting Tools
• Package Dimensions :1.5 \" L X4.0 \" W X1.5 \" H
• Country Of Origin :China
• Package Weight :0.7Lbs

• Solid negative ball stops with 15 degrees spacing fast & easy set-ups.; Can be used for grinding 2-3-4-6-8 and 12 flute end mills
• This fixture takes 5C round collets for grinding end mill 1/16\" ~ 1-1/8\" .Clearance & relief angels are built into the base
• Shell mills can easily be held with Straight Shank arbors
• Clearance & relief angels are built into the base

• Unique design allows you to use both sides for threading cuts
• Supplied with a fully adjustable carbide chip breaker and carbide shims
• Two triangular carbide inserts are included
• Interchangeable with Aloris and Dorian AXA series
• Replacement inserts are part # 6004-9031

• Heavy duty frame
• Precision made
• 4 position steel anvil
• Steel pinions

• 90 degree square shoulder
• Used for slotting and peripheral milling
• Uses standard APKT-1003 (#6010-4203) inserts with M2.5 X 6mm (#2100-0070) screw.
• Country of origin: China

• One piece central spindle and revolving body is made of hardened alloy steel
• Ground for high accuracy
• Precision, high-quality bearings
• Combination of ball bearings and thrust bearings
• Dust-proof seal

• Supplied in a fitted case
• 14 pilots with a 5/32\" shank including 0.187, 0.204, 0.213, 0.229, 1/4, 17/64, 9/32, 5/16, 21/64, 11/32, 3/8, 25/64, 13/32 and 7/16
• 6 counterbores including 5/16, 3/8, 7/16, 1/2, 9/16 and 5/8
• 1 Holder with a 3/8\" shank
• Straight shank

• Tool bit capacity is 1 inch
• Interchangeable with KDK same series tool holders
• All working parts hardened and ground
• KDK style tool holders fit all of the 100, 150, and 200 size bodies as they all have a 1.75\" dovetail

• Made of 20CrMnTi alloy steel
• Electrolysis nickel coating
• Balanced to 18, 000 RPM
• Tolerance is 0. 0003\" Maximum
• Superior finish and craftsmanship

• Size (Inch) 2; Shank Diameter 1
• Overall Length 4-3/8
• Right hand
• High speed steel

• Central spindle is made of hardened alloy steel and ground for high accuracy
• Precision high quality bearings with a combination of ball bearings and thrust bearings
• Dustproof seal on the front end
• Accuracy load of .0003\". Radial Load is 1,100 lbs
• Maximum RPM's is 2,500