Cutting Tools By OSCARBIDE

• OSCARBIDE 3/4\" Heavy-Duty Lathe Turning tool set include 1pcs each of SCLCR,SCLCL,SDJCR,SDNCN,SWGCR external turning tools holder, 1 pcs MGEHR grooving tool holder, 1 pcs SER threading tool holder
• Turning lathes Holders are made of high quality steel with Nickel Cotated, inserts are made of carbide with Tin-coated, moistureproof, dust-proof,for long time use
• Used for semi-finishing/roughing steel,metal,Fit for Turning,grooving or threading
• Replacement cutter of this kit , please search the Asin of this item: B07R9ZXG5J on Amazon to buy it.
• 7pcs lathe cutting holders with 2pcs of keys packed in a premuim aluminium carrying case,easy to carry

• OSCARBIDE Boring Bar Set ,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use
• Round shanks allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips
• Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post
• Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine
• Replacement insert for this kit ,please search the Asin of item: B07Q2HNGVF & B07R6M1F3H

• Carbide Indexable End mills, R8 shank, 3\"Cutting Diameter,Overall Length: 6-1/4''
• Positive rake 90?,right hand cut
• Reduces cutting forces,Maximum rigidity
• Used for slotting and peripheral milling,and mill steel, aluminum, and stainless steel
• 6 Flutes, 6 Peices carbide inserts Apkt1604 installed.when one of the inserts dulls, simply invert the insert, and use another tip to cut. no need to resharpen the dull insert.

• Indexable face mill 7 Flutes , 90 Degree Cutting Angle, 3 inch Cutter Diameter, 1 inch Bore Diameter
• Apkt1604 installed.when one of the inserts dulls, simply invert the insert, and use another tip to cut. no need to resharpen the dull insert.
• Fitted with a 10? positive rectangular insert allow the high depth of cut and feed per tooth
• Used for All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless,heat resistant steels, cast irons and aluminum alloys
• Uses APKT / APHW / APKR_APHT / APMT insert

• 3/4? Metal lathe cutting tools includes 1pcs External Parting&Grooving Tool Holder QA12R-30, 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S12S-SCLCR Boring Bar
• Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general lathe tool holder
• Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action
• Metal Lathe tools suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal
• All metal lathe cutting tools and inserts packed in a premuim aluminium carrying case,easy to carry

• OSCARBIDE Boring Bar Set ,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use
• Round shanks allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips
• Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post
• Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine
• Replacement insert for this kit ,please search the Asin of item: B07Q2HNGVF & B07R6M1F3H

• 1pcs External Parting&Grooving Tool Holder QA08R-20 , 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S08M-DCLCR Boring bar
• Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general holders
• Inserts are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action
• Suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel or Aluminum
• Replacement inserts of this kit , please search the Asin of this item: B0875TPL4Y on Amazon to buy it. All holders and inserts packed in a premuim aluminium carrying case,easy to carry

• OSCARBIDE 3/4\" Heavy-Duty Lathe Turning tool set include 1pcs each of SCLCR,SCLCL,SDJCR,SDNCN,SWGCR external turning tools holder, 1 pcs MGEHR grooving tool holder, 1 pcs SER threading tool holder
• Turning lathes Holders are made of high quality steel with Nickel Cotated, inserts are made of carbide with Tin-coated, moistureproof, dust-proof,for long time use
• Used for semi-finishing/roughing steel,metal,Fit for Turning,grooving or threading
• Replacement cutter of this kit , please search the Asin of this item: B07R9ZXG5J on Amazon to buy it.
• 7pcs lathe cutting holders with 2pcs of keys packed in a premuim aluminium carrying case,easy to carry

• Carbide Indexable End mills, R8 shank, 3\"Cutting Diameter,Overall Length: 6-1/4''
• Positive rake 90?,right hand cut
• Reduces cutting forces,Maximum rigidity
• Used for slotting and peripheral milling,and mill steel, aluminum, and stainless steel
• 6 Flutes, 6 Peices carbide inserts Apkt1604 installed.when one of the inserts dulls, simply invert the insert, and use another tip to cut. no need to resharpen the dull insert.

• Indexable Cutting Tool Holder Set include 1 pc 3/4\" SLTBN19-5 Tool Block. 1 pc NCIH26-3 adjustable blade with 5 pcs GTN-3 carbide inserts. 1 pc NCIH26-4 with 5 pcs GTN-4 Inserts and 1 pcs wrench.
• CTN-3 carbide inserts made of carbide Grade C6,0.12\" width, TiN Coated. GTN-4 carbide inserts, made of Carbide Grade C6, 0.16\" width, TiN Coated
• Suitable for varied grooving
• Equipped carbide inserts for Semi-finishing/roughing machining of steel
• Packed in perfect aluminum case

• Heavy Duty Indexable End Mill 1 inch Cuting Diameter,1 inch Shank Weldon, 4-1/4 inch overall Length,1-7/16 Cuting Length, 2 Flutes
• Tin coated carbide turning milling APKT1003 inserts,last longer and can run at faster speeds than uncoated ones
• When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge
• 90? heavy-duty deep slotting,for high speed machining with low power consumption
• Used for Side milling and finish pocketing cutter

• OSCARBIDE 5/8\" Heavy-Duty Turning tool set including 1pcs each of SCLCR,SCLCL,SDJCR,SDNCN,SWGCR external lathes turning holder, 1 pcs MGEHR grooving tool holder, 1 pcs SER threading tool holder
• Turning Holders are made of high quality steel with Nickel Cotated, Cutters are made of carbide with Tin-coated, moistureproof, dust-proof,for long time use
• Metal Lathe Cutting Tools Used for semi-finishing/roughing steel, Metal,Fit for Turning,grooving or threading
• Replacement Cutter of this Metal Cutting Tools, please search the Asin of this item: B07R9ZXG5J on Amazon to buy it.
• 7pcs lathe cutting tool holders with 2pcs of keys packed in a premuim aluminium carrying case,easy to carry

• Indexable Cutting Tool Holder Set include 1 pc 1/2\" SLTBN12-2 Tool Block with 10 pcs GTN-2 carbide inserts
• CTN-2 carbide inserts made of carbide Grade C6, 0.087\" width, TiN Coated.
• Suitable for varied Grooving,Cut-off,Parting-off,Chamfering
• This cut-off tool kit works with tool holders that can hold 1/2\" AXA lathe turning bits,Equipped carbide inserts for Semi-finishing/roughing machining of steel and stainless steel
• Packed in perfect aluminum case

• Carbide Indexable End mills, R8 shank, 2'' AP16, Overall Length: 6-1/8\".
• Positive rake 90?, right hand cut
• Reduces cutting forces, Maximum rigidity
• Used for slotting and peripheral milling
• 5 Flutes, carbide inserts APKT160408 installed

• Sclcr Boring Bar 1\" Shank Diameter, Overall Length 12?
• Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient,good wear resistance
• Used for Turning internal hole,reaming,copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine
• CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle
• Packing:1 pc 1'' x 12'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5)

• Carbide Indexable End mills, R8 shank, 3\"Cutting Diameter,Overall Length: 6\"
• Positive rake 90?,right hand cut
• Reduces cutting forces,Maximum rigidity
• Used for slotting and peripheral milling
• 5 Flutes,carbide inserts TPG32 TPCN32PDTR installed