Tegara
Cutting Tools
Cutting Tools By Tegara
by Tegara
Price: 
68436
134187
68436
134187
You Save: -49%
by Tegara
Price: 67502
77589
67502
77589
You Save: -13%
by Tegara
Price: 36810
58428
36810
58428
You Save: -37%
by Tegara
Price: 36053
58150
36053
58150
You Save: -38%
by Tegara
Price: 37284
60136
37284
60136
You Save: -38%
by Tegara
Price: 36109
57316
36109
57316
You Save: -37%
by Tegara
Price: 34822
56164
34822
56164
You Save: -38%
by Tegara
Price: 34822
56164
34822
56164
You Save: -38%
by Tegara
Price: 34575
55767
34575
55767
You Save: -38%
by Tegara
Price: 35216
56800
35216
56800
You Save: -38%
by Tegara
Price: 35709
56680
35709
56680
You Save: -37%
by Tegara
Price: 107424
123476
107424
123476
You Save: -13%
by Tegara
Price: 36602
52289
36602
52289
You Save: -30%
Tegara CAT40 ER20 4.0 in. Collet Chuck Tool Holder 4 pcs 202-1466G-4 M[ - Product Features
- Projection Length: 4.0 in
- Drawbar Thread Size: 5/8x11 UNC
- Collet Series: ER20, Collet Nut Diameter: 1.34, Hex
- Maximum Torque Ft/Lb: 75
- TIR (in): 0.0001, Max RPM Balanced to: G2.5 20,000
Tegara BT30 1/2 in Dual Contact End Mill Tool Holder 2 pcs 202-7517-2 P[ - Product Features
- Bore Diameter: 1/2\"
- Drawbar Thread Size: M12x1.75
- Max RPM Balanced to: G2.5 20,000
- TIR (in): 0.0002
- Projection Length: 1.2\"
Tegara CAT40 1/4 in x 2.50 in. End Mill Tool Holder 2 pcs 202-7117G-2 P[ - Product Features
- Bore Diameter: 1/4\"
- Projection Length: 2.5\"
- Nose Diameter: 0.81\"
- Drawbar Thread Size: 5/8x11 UNC
- TIR (in): 0.0001, Max RPM Balanced to: G2.5 20,000
Tegara CAT40 5/16 in x 2.50 in. End Mill Tool Holder 2 pcs 202-7119G-2 P[ - Product Features
- Bore Diameter: 5/16\"
- Projection Length: 2.50\"
- Nose Diameter: 0.88\"
- Drawbar Thread Size: 5/8x11 UNC
- TIR (in): 0.0001, Max RPM Balanced to: G2.5 20,000
Tegara 3/4 x 2.75 inch BT30 End Mill Tool Holder 2 pcs 202-7541-2 P[ - Product Features
- Bore Diameter: 3/4\", Nose Diameter: 1.70\"
- Drawbar Thread Size: M12x1.75, Shank Size: BT30
- Projection Length: 2.75\"
- TIR (in): 0.0002; Max RPM Balanced to: G2.5 20,000
- Product Included: - Balance report; - End mill locking screw with 5/8-18 UNF thread
Tegara BT40 1/4 in x 2.50 in End Mill Tool Holder 2 pcs 202-7144G-2 S[ - Product Features
- Bore Diameter: 1/4\", Nose Diameter: 0.88\"
- Drawbar Thread Size: M16x2.0, Shank Size: BT40
- Gage Length: 2.50\"
- TIR (in): 0.0002
- Max RPM Balanced to: G2.5 20,000
Tegara CAT40 1/8 in x 3.0 in. Taper End Mill Tool Holder 2 pcs 202-7434-2 P[ - Product Features
- Bore Diameter: 1/8\"
- Projection Length: 3.0\"
- Nose Diameter: 0.72\"
- Drawbar Thread Size: 5/8x11 UNC
- TIR (in): 0.0001, Max RPM Balanced to: G2.5 20,000
Tegara 5/8 x 1.75 inch BT30 End Mill Tool Holder 2 pcs 202-7539-2 P[ - Product Features
- Bore Diameter: 5/8\", Nose Diameter: 1.50\"
- Drawbar Thread Size: M12x1.75, Shank Size: BT30
- Projection Length: 1.75\"
- TIR (in): 0.0002; Max RPM Balanced to: G2.5 20,000
- Product Included: - Balance report; - End mill locking screw with 9/16-18 UNF thread
Tegara 1/2" x 2.0" BT30 End Mill Tool Holder 2 pcs 202-7536-2 P[ - Product Features
- Bore Diameter: 1/2\", Nose Diameter: 1.37\"
- Drawbar Thread Size: M12x1.75, Shank Size: BT30
- Projection Length: 2.0\"
- TIR (in): 0.0002; Max RPM Balanced to: G2.5 20,000
- Product Included: - Balance report; - End mill locking screw with 7/16-20 UNF thread
Tegara BT30 1/8 x 2.25 inch End Mill Tool Holder 2 pcs 202-7654-2 P[ - Product Features
- Bore Diameter: 1/8\", Nose Diameter: 0.73\"
- Drawbar Thread Size: M12x1.75, Shank Size: BT30
- Projection Length: 2.25\"
- TIR (in): 0.0002; Max RPM Balanced to: G2.5 20,000
- Product Included: - Balance report; - End mill locking screw with 1/4-28 UNF thread
Tegara 1/2 x 2.75 inch BT30 End Mill Tool Holder 2 pcs 202-7537-2 P[ - Product Features
- Bore Diameter: 1/2\", Nose Diameter: 1.37\"
- Drawbar Thread Size: M12x1.75, Shank Size: BT30
- Projection Length: 2.75\"
- TIR (in): 0.0002; Max RPM Balanced to: G2.5 20,000
- Product Included: - Balance report; - End mill locking screw with 7/16-20 UNF thread
Tegara CAT40 3/16 in x 3.0 in. End Mill Tool Holder 2 pcs 202-7115G-2 P[ - Product Features
- Bore Diameter: 3/16\"
- Projection Length: 3.0\"
- Nose Diameter: 0.875\"
- Drawbar Thread Size: 5/8x11 UNC
- TIR (in): 0.0001, Max RPM Balanced to: G2.5 20,000
Tegara CAT40 5/8 in x 1.75 in. End Mill Tool Holder 2 pcs 202-7126G-2 P[ - Product Features
- Bore Diameter: 5/8\"
- Projection Length: 1.75\"
- Nose Diameter: 1.755\"
- Drawbar Thread Size: 5/8x11 UNC
- TIR (in): 0.0001, Max RPM Balanced to: G2.5 20,000
Tegara CAT40 ER16 3.5 in. Collet Chuck Tool Holder 4 pcs 202-1581-4 M[ - Product Features
- Projection Length: 3.5\"
- Drawbar Thread Size: 5/8x11 UNC
- Collet Series: ER16, Collet Nut Diameter: 1.08\"
- Maximum Torque Ft/Lb: 50
- TIR (in): 0.0001, Max RPM Balanced to: G2.5 20,000
Tegara CAT40 1/4 in x 2.50 in. End Mill Tool Holder 2 pcs 202-7117G-2 P[ - Product Features
- Bore Diameter: 1/4\"
- Projection Length: 2.5\"
- Nose Diameter: 0.81\"
- Drawbar Thread Size: 5/8x11 UNC
- TIR (in): 0.0001, Max RPM Balanced to: G2.5 20,000
Tegara 3/4 x 2.75 inch BT30 End Mill Tool Holder 2 pcs 202-7541-2 P[ - Product Features
- Bore Diameter: 3/4\", Nose Diameter: 1.70\"
- Drawbar Thread Size: M12x1.75, Shank Size: BT30
- Projection Length: 2.75\"
- TIR (in): 0.0002; Max RPM Balanced to: G2.5 20,000
- Product Included: - Balance report; - End mill locking screw with 5/8-18 UNF thread
If you have a business establishment in india,
Contact us
to list your business related to any construction categories.Browse by Topic
Construction Events
To Know more about the events about Air Conditioners, Basements, Bathrooms, Bedrooms, Cabinets, Decorating, Design Plans, Doors, Electrical Lightings, Flooring, Home Security, Kitchen, Landscape, Painting, Plumbing, Fixtures and many more..
© 2007 - IndianConstructionIndustry.com. All Rights Reserved