Industrial & Scientific Store - Fasteners

• Provides a connection between the rafter or truss and the wall of the structure that helps resist wind and seismic forces
• Approved for installation with load-rated Strong-Drive SD Connector screws
• Use also for a variety of connections where one member crosses another
• Made from 18-gauge steel
• Galvanized (G90) for corrosion resistance

• Premium 304 Series stainless steel construction, 18 gauge
• Exterior Dimensions: 19-in. L x 8.75-in. W x 4.75-in. D, Interior Dimensions: 16.375-in. L x 6.125-in. W x 4.75-in. D
• The feet and side bumpers protect your sink and countertops from scratches
• Features welded mesh and vinyl corner protectors

• Designed to meet stringent building codes for seismic or high-wind events
• Slotted for adjustability
• Features 1-in. standoff to help prevent rot at post end
• Nominal post size: 8x8
• Base made from 14-gauge steel; straps made from 12-gauge steel. ZMAX galvanization with a black powder coat offers extra corrosion resistance for exterior and treated-wood applications. Straps ZMAX with a black powder coat for decorative applications. Outdoor Accents side plates available (see APVBDSP)

• This nickel-plated screw has excellent holding power in particle board, MDF, and plastic material.
• Diameter: #10, Length: 3/4\"
• Drive: Phillips #2, Head: Pan
• Official Rok / Rok Hardware Product

• Deep T-15 star tip recess specially engineered head allows for less slipping and stripped heads
• 410 stainless steel, Xylan coating and bright hardening
• #3 drill point digs into decking material with ease and cleanly penetrates the deck boards and underlying metal joists
• Auger tip for self-tapping into metal deck joists
• For steel joists and marine environments

• Item Weight: 5.0 lb
• Country of Origin: United States
• Brand name: Simpson Structural Screws
• Item Dimensions: 8.0\"L x 3.8\"W x 9.6\"H

• Above 1000Hrs Salt Spray Test Specifically designed to work best with either pressure-treated lumber or composite decking. Adopt premium carbon steel with high hardness coating against rust and corrosion. Our deck screws have passed about 1000 hours salt spray test provide exceptional protection against corrosion.
• None Strip Torx Drive We highly recommend the use of Torx drive, provides a more positive bit engagement over other drives. This makes it easier to drive and harder for impact driver bits to strip the heads of decking screws. For coated screws, we typically prefer star drive (T-25) as it gives you lots of points of contact and the bit stays in the fastener throughout the drive. Note: The reason screw heads get stripped out is because the bits are worn.
• User-Friendly Design We design our special thread cutting screws with sharp points and serrated thread. It's mainly designed for too large torque and the produced destructive internal stresses. It can not only start drilling holes rapidly without pre-drilling but also make the contact surface smooth and avoid wood splitting. We use tan plated metal to make it suitable for most woodwork because tan is similar to the color of wood.
• Reliable Quality Accurate size, and we keep concentrated on our quality control. The salt spray test result provies that our screws can adapt to some harsh environment. We also provide you good products both in quality and quantity which is worth more than it's being sold for.
• Range of Applications These screws have proven themselves across diverse projects, from deck remodeling to scaffolding construction. The versatility in their applications is a standout feature, as users find them suitable for a wide array of tasks. The positive feedback on their adaptability underscores their efficacy in different scenarios, making them a go-to solution for users with varied construction requirements.

• SPAX 4CUT tip effectively prevents splitting the wood and can be used without pre-drilling (depending on the wood)
• Certified for use in construction
• SPAX-D are the ideal screws for wooden terraces. The patented wave profile ensures quick and secure screwing.
• Thanks to the CUT tip, these screws can be set precisely without pre-drilling (depending on the wood) without splitting the material.
• 0/3657/000/ 5,0/ 60/ /02

• DIN 931
• Coarse Thread
• Partially Threaded
• Tensile Strength: 800 N/mm2 (thru 16 mm diam.) 800 N/mm2 (over 16 mm diam.)
• Class 8.8 Steel, Quenched and Tempered

• ASME
• Coarse Thread
• Partially Threaded
• Tensile Strength: 800 N/mm2 (thru 16 mm diam.) 800 N/mm2 (over 16 mm diam.)
• Class 8.8 Steel, Quenched and Tempered

• One Piece Wrap Around Clip
• Threaded End Is Chamfered For Ease Of Starting Nut
• Length Identification Head Marks
• Package Dimensions : 4.0 L X 13.0 H X 4.0 W (Inches)

• One-piece, finished head design
• Low installation torque in concrete and masonry
• Ratchet teeth on underside of hex washer head lock against the fixture
• Diameter, length and identifying marking stamped on head of each anchor
• Can be installed closer to a free edge than traditional expansion anchors

• CORROSION RESISTANT BODY - Anchor body can be used in environments where moisture may be present
• EXPANDS THE WHOLE LENGTH OF ANCHOR - Excellent performance in base material of questionable strength
• INTERNAL THREADS - Easy to remove
• ACCEPTS BOLTS WITH COARSE THREADS - Common type of fastener which is easy to find
• EVERY DIAMETER AVAILABLE IN ONE LENGTH - Selection simply requires choosing a diameter and then selecting the anchor