Industrial & Scientific Store - Fasteners

• Alloy Steel, Quenched and Tempered
• Minimum Tensile Strength of 150,000 PSI
• 5/8-11 USS Coarse Thread
• Yellow Chromate Zinc Coating
• 10 Pieces

• Powernail 16-gauge, 2\" Stainless Steel flooring nail (also known as cleat or PowerCleat)
• Specialty flooring nail made in the USA of Type 304, chromium-nickel stainless steel
• Interior/Exterior nail, Resistant to corrosive atmospheres, organic acids and oxidation at high temperatures
• Innovative L-shaped head helps to eliminate split tongues on floor boards
• Can be used with any 16-gauge, L-shaped cleat nailer to fasten tongue and groove hardwood flooring

• Made with pride by Monkey jams' Shed in the West Midlands, England.
• A selection of the most commonly used A2 Stainless Steel NY lock Nuts - detailed below.
• Highest quality fasteners sourced from ISO9001 accredited British suppliers - RoHS compliant where a
• English made compartment box - very strong, rigid, will not open in transit and designed to stack
• One of a series of stackable, colour coded kits of bolts, nuts and washers, screws and more.

• INSTALLS INTO A VARIETY OF BASE MATERIALS-Can be used in a variety of applications making job easier and faster
• ANCHOR DIAMETER EQUALS HOLE DIAMETER-Makes it easy to determine hole size
• ALL SIZES PACKAGED 100 PIECES PER BOX-Quantity makes it easier to purchase and use
• PERMANENT FASTENING-Once installed, fastener cannot be removed, very secure

• Fast-start self-drilling point prevents splitting and eliminates the need for predrilling
• Flat head leaves a clean, even finish
• Red painted ceramic coating
• 4-layer coating provides superior rust and corrosion protection
• Star drive prevents stripping and camout
• FREE T25 STAR BIT: Free driver bit included in package to match screws and take the guesswork out of installation
• Approximate screw count: 275

• Carriage Bolts are designed to fasten a wooden face to either wood or metal
• Flat head provides a semi-flush finish to applications
• The heads is designed to eliminate the need for a washer
• Square underside of the head is self locking to eliminate the need for a driving tool
• Galvanized finish is perfect for rust prevention

• Working Load Limit: 5,200 lbs. | Break Strength: 26,000 lbs.
• Heavy duty forged steel, galvanized for corrosion resistance
• Shoulder eye bolts can be used for either straight line or angular pulls
• Please note: Loading at an angle will significantly reduce a bolt's rated capacity
• Quantity: 4

• Qualified for static and seismic loading conditions
• Thread design undercuts to efficiently transfer the load to the base material
• No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
• Hex-washer head requires no separate washer and provides a clean installed appearance
• Carbon steel Titen HD utilizes a specialized heat-treating process that creates tip hardness for better cutting without compromising the ductility

• HIGH LOAD CAPACITY Introducing our robust Mini Lever Hoist, a powerhouse with a lifting capacity of 1/4 Ton and a 10Ft long alloy steel G80 chain. Engineered for strength and durability, it's an indispensable tool for anyone passionate about DIY projects. Ideal for the handyman in your life, this lever hoist is not just a tool but a reliable partner for your husband, father, or grandfather in their crafting and home improvement endeavors.
• COMPACT AND EFFICIENT DESIGN Designed for efficiency, our ratchet puller hoist boasts a compact and lightweight build, saving valuable space while delivering powerful performance. Its advantageous design is particularly beneficial for machinery installations in power-limited and tight spaces, showcasing its versatility and practicality.
• SUPERIOR DACROMET COATING Equipped with a Dacromet coating, our hoist offers exceptional corrosion protection and heat resistance. The 4-8 micron Dacromet layer surpasses traditional zinc coatings in durability, providing superior protection and an environmentally friendly solution for long-term use.
• SMOOTH AND RELIABLE OPERATION Experience seamless operation with our single-step reduction gear, ensuring consistent load holding. The load chain guide mechanism allows for a smooth, quiet chain movement. The non-slip rubber design of the manual lever chain hoist handle guarantees a secure grip in various working conditions.
• PORTABLE AND CONVENIENT Tailored for on-the-go tasks, this mini chain lever hoist is ideal for short-distance lifting of small equipment and items. It comes with a handy storage bag, enhancing its portability and ease of use. Should you have any inquiries or need assistance, our customer support team is readily available to assist you.

• 3-1/2-Inch, 8-gauge (3-inch length under lower head) Top Head 9/32-inch; lower head 11/32 inches
• Non-coated smooth shank
• 30 pound clear resealable bucket with handle
• Approximately 45 per pound
• Meets or exceeds appropriate ASTM and UBC specifications

• 300 Series Stainless Steel, (18-8)
• Tensile - 100,000 psi to 125,000 psi, Hardness - 85 Rockwell B
• 1/2 x 2-1/2\" Hex Head Lag Screw (also known as lag bolt)
• Great corrosion resistance for outside applications
• 25 Pieces

• ZINC PLATED - Helps prevent rust in dry environments
• WIDE RANGE OF SIZES - Insures proper fastener for best results
• PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation
• HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation

• Package included: you will receive 100 sets of insulating pins, self locking washers round and insulation dome cap washers, 3 pieces of a set, sufficient quantity and various styles can meet your daily needs and replacement, it is a nice tool combination
• Quality material: these insulation steel nails are made of low carbon steel and galvanized coating, which is sturdy and not easy to rust, has good insulation performance; Self locking washers round is made of mild steel, insulation dome cap washers are made of aluminum, which can be well matched work
• Easy to operate: simply nail the base of the insulating nail to the ceiling or wall and pierce the fiberglass panel into the nail; To ensure stability, there must be at least 1 nail in each corner, then push the washer onto the nail to secure the panel in place, and the whole process takes no more than a few minutes to stabilize the item nicely
• Application areas: these aluminum insulation cap washers are mainly applied in anchoring aspects of wall insulation house, HVAC system air duct insulation and thermal insulation
• Different fixing method: perforated insulating pins can be fixed in different ways, insulating pins can be soldered, glued or self-adhesive

• HIGH QUALITY STAINLESS STEEL: These #10 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today.
• Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments.
• Type 17 Point - This thread cutting screw is ideal for use with wood; it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling
• Features a Bugle Head, and a Square drive to be used with a #2 Square Drive
• Size Number: #10 / Length of Screw is 3-1/2\" inches with 2-1/4\" inches of thread

• Package Includes 2 Pcs 1-5/8'' Diameter Flange Two Hole Pins?As shown in Figure ).100% brand new.
• Compatible with 1-5/8'' Diameter, work with 1/2 '' to 1-1/2'' Bolt Holes Up to 3'' Thickness of Flange.
• Material 304 stainless steel material, which is super strong in corrosion resistance, oxidation resistance, and rust resistance, greatly improving its service life.
• Easy to install Removable design, thread height can be adjusted according to installation requirements. In addition, the thread is very precise, clear, and firm, allowing for a more precise fit between the pipeline and flange.Easy to level pipeline.
• Quality assurance Factory direct sales, we promise that every product is of high quality. If you are not 100% satisfied with the received goods, please apply for an exchange, return, or refund.

• Designed to protect the bottom of your sink.
• Custom designed to completely cover the bottom of the sink.
• Properly positioned opening for convenient access to drain or disposer.
• Built from solid stainless steel to resist corrosion and provide years of service.